Instrukcja obsługi OSD Audio AP520

OSD Audio głośnik AP520

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OSD Audio AP520 (3 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Thank you for giving OSD AUDIO the chance to earn your business! We are condent you will nd that OSD oers an outstanding combination of performance
and value in everything we make. To ensure you get the most out of your new patio speakers, please take a moment to read this manual before you get started.
Installing Speakers
These weather resistant patio speakers are manufactured to resist
a variety of weather condition. The most ideal place to install these
speakers is the undersides of most eaves and overhangs as they
provide the best protection.
Like all speakers, they sound the best when placed no more than
seven feet apart from each other, and slightly higher than ear level.
If the speakers are more than seven feet apart, toe them in toward
the center of the listening area.
These speakers are not waterproof and cannot be submerged under
water.
Placing Speakers
If your application requires the speaker to be mounted, please
follow these directions. Using the hardware supplied, mount the
bracket rst. Attach the speakers to the brackets using the large
plastic knobs supplied. Never mount a speaker on a wall made
of unreinforced drywall or plasterboard. If you are unsure,
consult a professional contractor. (See Diagram 1)
The binding post speaker terminals on the speakers will accommodate
up to 12-guage wire. When using 70V amplier output, please select a
power setting through the knob switch. When connecting the speakers,
it is very important to observe the correct polarity. This means that the
wire attached to the (+), red, or positive terminals on one component
must be attached to the (+), red, or positive terminal on the
corresponding component speaker output terminals. Similarly, the (-),
Black, Negative or ground terminals must connect to the respective (-),
Black, Negative, or ground terminals. This is easy to do by locating the
color stripes that appears on most wire.
Painting the grilles
The metal grilles may also be painted. Use very thin paint (5:1). It will
be easier to paint the grilles while it is o the speaker. Avoid
plugging up the holes with excess paint.
Mounting
To install the bracket on the speaker. Screw the bracket knobs into the
cabinet. Point the speaker toward the listening area. Once the direction
of the speaker has been determined tighten the bracket knobs securely.
(See Diagram 2)
Diagram 1
Screw
Bracket
Diagram 2
First remove the grille fom the speaker using spray paint lightly go
over the front of the grille and then go over the back of the grille.
Two coats may be nessesary for desired look.
Knob
Knob
x
x
Warranty & Repair
A A ducts ( year mited Warranty inst d e f of p e ompany ll OSD UDIO speaker pro have 1) Li aga efects in mat rials and workmanship. Proo urchas must acc all claims.
Du ing the warranty period OSD AUDIO will replace any defect ve p rt nd efe ip it ut ha ge f r e the p rts r abor i a a corr ct anye d ct in sh workman w ho c r o i r a o l r
are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD AUDIO. The unit
must be returned to OSD AUDIO at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor
is damaged resulting from abuse or from servicing performed by an agency or person
OSD AUDIO sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD AUDIO product
purchased from an unauthorized dealer or other source, including retailers, mail over dealers and online sellers will not be honored or serviced under existing OSD
AUDIO warranty policy. Any sale of product by an unauthorized source or other manner not authorized by OSD AUDIO shall void the warranty on the applicable
product.
Dama to ge or des uction oftr components due to application of excess vei po r we voids the warranty on thos e p . arts In these es, rcas epairs will be made on the basis tof he retail
value of the aparts nd labor. To ret urn o r sfor repairs, you must email cust me ervice RMat A@OSDA .UDIO com for a Returned e r (Merchandis Autho ization RMA) number# then
the unit m t s OSD wus be hipped to AUDIO at the owner's expense, along ith a note explainin th naturg e e of servic uire req ed. e pBe sur to ack th e s ape ker(s) in a corrugated
co tain ner with at least 3 inches of es ie m er l p te tr il nt at ia to ro ct he u t fni rom amd age in transit.
This Warranty Does Not Cover:
Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • • Any product whose
identifying number of decal, serial #, etc. has been altered, defaced or removed Normal wear and maintenance.•
WIRING
Connect the speaker cable to the speaker cable terminals, matching the proper polarity with your amplier, + to + (red) and - to - (black). Make sure
to connect the right channel to the right speaker and the left channel to the left speaker . Either channel may be attached to either terminals set,
however, be sure that polarity ( + and - ) is correct on each channel or the performance of the speaker will be seriously aected as one channel will
cancel out the other.
70 Volts consideration (Applicable to only 70V tap speakers)
The 70V transformer offers you the ability to daisy chain multiple
number of speakers in series. In doing so, you would simply connect
1 pair of outputs to each speaker and daisy chain to subsequential
speaker/s. If you don’t intend to daisy chain the speakers, set the
default setting to 8 ohms. (See Diagram 3)
AP850 / AP660 / AP650 / AP640
AP640T / AP550T / AP525
AP520 / AP520T / AP400
(Red = Positive / Black = Negative)
AP520
+
_
AP550TT
Connect Left channel set
Connect Right channel set
+
+_
8
O
h
m
5
W
1
0
W
1
5
W
2
0
W
2
5
W
8
Ω
,
1
0
W
,
5
W
,
2
.
5
W
.
Diagram 3
L/R Pair Speaker Single - Stereo
AP550TT
_
+
_
AP850
Patio Speakers AP670
AP640 AP550TT
AP520T
AP525
Speaker Type:
Tweeter:
Woofer:
Impedance:
Sensitivity:
70V Tap: (optional)
Bass Port
Frequency Response:
Power Handling:
D e x W x )im nsions (H: D
Un f Meait o sure:
8” Ultra Patio Speaker
2” DSilk ome
8” Polypropylene
8 
90dB
40W, 30W, 25W,20W
Yes
37Hz-22kHz
200 Watts
15 ¾” x 11” x 10”
Pair
6 ½” Ultra Patio Speaker
1” Silk om D e
6 ½ p” Poly ropylene
8 
90dB
N/A
Yes
44Hz - 22kHz
120 watts
14 ⁄” x 8 ¼” x 7 ⁄”
Pair
AP660
6 ½” Ultra Patio Speaker
1” Silk om D e
6 ½ p” Poly ropylene
8 
89dB
N/A
Yes
37Hz - 22kHz
175 watts
11 ½” x 8 ½” x 7 ½”
Pair
6 ½” High Performance
Patio Speaker
1” DSilk ome
6 ½ p” Poly ropylene
8 
89dB
4W, 8W, 16W, 30W
39Hz - 20kHz
150 watts
11 ½” x 8 ⁄” x 7 ⁄”
Pair
5 ¼” High Performance
Single Stereo Patio Speaker
Dual 1” Si elk om D
5 ¼ p” Poly ropylene
8 
90dB
N/A
37Hz - 22kHz
150 watts
11 ⁄” x 7 ⁄” x 7 ⁄”
E hac
5 ¼” High Performance
Patio Speaker
1” Silk Dome
5 ¼ p” Poly ropylene
8 
90dB
2.5W, 5W, 10W, 15W, 20W
45Hz - 22kHz
120 watts
9 ⁄” x 7 ⁄” x 6 ⁄”
P rai
5 ¼” High Performance
Patio Speaker
1” Silk om D e
5 ¼ p” Poly ropylene
8 
88dB
4W, 8W, 16W, 30W
45Hz - 22kHz
120 watts
9 ¼” x 7 ⁄” x 6 ⁄”
Pair
AP650
6 ½” Ultra Patio Speaker
1” Silk e Dom
8 
90dB
2.5W, 5W, 10W, 15W
Yes
37Hz - 22kHz
150 watts
12” x 7 ⁄” x 8 ⁄”
P r ai
Patio Speakers
Speaker Type:
Patio Speakers
Speaker Type:
Tweeter:
Woofer:
Impedance:
Sensitivity:
70V Tap: (optional)
Frequency Response:
Power Handling:
D e x W x )im nsions (H: D
Un f Mea reit o su :
Tweeter:
Woofer:
Impedance:
Sensitivity:
70V Tap: (optional)
Frequency Response:
Power Handling:
D e x W x )im nsions (H: D
Un f Meait o sure:
AP840
8” High Performance
1” Silk Dome
8” Polypropylene
8 
90dB
N/A
Yes
30Hz-22kHz
200 Watts
14 ¾" H x 11" W x 9 ¼" D
P rai
AP450
4” Ultra Patio
Patio Speaker
½”
4 p” Poly ropylene
8 
90dB
N/A
58Hz - 22kHz
100 watts
7 ¾” x 5 ¼” x 4 ¼”
Pair
Mylar Dome
OSD Audio • 775 Columbia St. • Brea • CA • 92821 • www.osdaudio.com • Tel (562) 697-2600

Specyfikacje produktu

Marka: OSD Audio
Kategoria: głośnik
Model: AP520

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z OSD Audio AP520, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik OSD Audio

OSD Audio

OSD Audio ACE840TT Instrukcja

9 Października 2024
OSD Audio

OSD Audio SVC-100 Instrukcja

9 Października 2024
OSD Audio

OSD Audio ICE630ST Instrukcja

9 Października 2024
OSD Audio

OSD Audio LS2 Instrukcja

9 Października 2024
OSD Audio

OSD Audio Black R63A Instrukcja

7 Października 2024
OSD Audio

OSD Audio Black R83 Instrukcja

7 Października 2024
OSD Audio

OSD Audio Black R63 Instrukcja

7 Października 2024
OSD Audio

OSD Audio Black R61 Instrukcja

7 Października 2024
OSD Audio

OSD Audio Black R81 Instrukcja

7 Października 2024
OSD Audio

OSD Audio Black R83A Instrukcja

7 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Yamaha

Yamaha DZR10-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha DZR15-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha DXS15XLF-D Instrukcja

11 Grudnia 2024
Yamaha

Yamaha NS-2000A Instrukcja

11 Grudnia 2024
Bogen

Bogen WMT1AS Instrukcja

11 Grudnia 2024
Ruark Audio

Ruark Audio Sabre-R Instrukcja

11 Grudnia 2024
Antelope

Antelope R4S Instrukcja

11 Grudnia 2024
Antelope

Antelope Atlas i8 Instrukcja

11 Grudnia 2024
MB

MB PESSPROVS62A Instrukcja

11 Grudnia 2024
MB

MB PESSPROVS32A Instrukcja

11 Grudnia 2024