Instrukcja obsługi Oricom HNA100

Oricom nieskategoryzowany HNA100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oricom HNA100 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Safety Information
Introduction
Parts and Functions
Preparation
How to Use
How to Maintain
Troubleshooting
Specifications
Express Warranty (Australia)
Oricom HNA100 Nasal Aspirator is included as a medical device on the Australian
Register of Therapeutic Goods (ARTG No. 229897), and is intended to enable clearing of
excessive mucus from nasal passages of an infant/child to facilitate easier breathing for
infants from 2 months old. Intended for domestic use only. ALWAYS READ THE LABEL
AND USER GUIDE. USE ONLY AS DRECTED. IF SYMPTOMS PERSIST SEE YOUR DOCTOR/
HEALTHCARE PROFESSIONAL.
- READ ALL INSTRUCTIONS BEFORE USE. For use on babies under 60 days old please
consult with your doctor first. Basic safety precautions should always be followed when
using any electrical device, especially intended for baby’s care. Use this product only for
its intended purpose as described in this User Guide and follow all instructions.
1) HNA100 is not a toy. HNA100 must be used by adults only after reading this User Guide.
2) Keep HNA100 and nozzle pieces out of children’s reach.
3) HNA100 is designed for domestic use, only to aspirate baby’s nasal secretions.
4) HNA100 is designed for intermittent use (15 seconds/minute max). Using the
appliance without a nozzle piece or keeping the switch on when the reservoir is full,
will exhaust battery prematurely.
5) Before using HNA100, make sure that all parts are correctly assembled.
6) Do not attempt to disassemble the nose cleaner unit or the nozzle pieces.
7) Do not strike, bend or drop the unit.
8) The reservoir nozzle piece is not sterile.
9) Do not use or store the unit under the following conditions: * Hot locations such as the
inside of a car parked outside in hot weather. * Under direct sunlight. * Humid or corrosive
locations. * Keep away from hot surfaces, flammable substances or explosive gas.
10) The nose cleaner should not be used in any conditions other than those described
above.
- Use this product only for its intended use as described in this User Guide. Only use
attachments recommended by Oricom. For any questions regarding the Oricom
HNA100, please contact the Oricom Support Team via email support@oricom.com.au or
phone on 1300 889 785 or 02 4574 8888.
MEDICAL WARNING
1) Wash your hands before and after using HNA100.
2) Do not push the nozzle deep into baby’s nostril. Use HNA100 only in the
recommended direction.
3) For the baby’s security, aspiration time is limited to a few seconds.
4) Do not use HNA100 in case of nasal irritation or hemorrhage.
5) In the case of infection, fever, nasal irritation or hemorrhage, please consult a doctor.
Page 1
Page 3
Page 4
Page 5
Page 5
Page 6
Page 7
Page 8
Page 9
- Do not use the device for purposes other than those stated in these instructions.
- Please keep the device away from heat source.
- If not used, please keep the device out of reach of children.
- Do not expose the nasal aspirator to electric shock.
- Never push the tip deep into the child’s nostrils.
- Do not use it in the bath.
- Always use the device in accordance with the User Guide.
- Do not leave the device unattended near children or people with reduced
physical or mental abilities.
- Only use the suction nozzles supplied with the device.
- Do not expose the device to direct sunlight.
- Do not disassemble or modify any part of the unit.
- Do not use the device in flammable anesthetic gas.
- If you experience any skin irritation or redness after a session, do not continue
to use in that area of the skin.
- To minimize the risk of strangulation, store the USB cable out of the reach of
children.
- Stop using the nasal aspirator if it operates erratically or if the device
malfunctions.
- Do not use accessories which are not supplied or recommended by Oricom.
Warning
- Do not drop the device and do not use if damaged.
- Nasal aspirator is designed for indoor use only.
- Do not use in conjunction with any nuclear magnetic resonance or CT equipment.
- Your Nasal Aspirator is designed to work within the operating temperatures and humidity
listed in the specifications. Using it outside these parameters will lead to malfunction.
- Recommended for home use only.
- Do not leave your nasal aspirator with children or pets. The HNA100 is not a toy.
- Do not expose the device to direct sunlight or leave in a high temperature environment.
- Do not use your nasal aspirator in a bath or shower or any environment of elevated
humidity (e.g. sauna, hydrotherapy etc.)
- For assistance, in setting up, using or maintenance of the nasal aspirator, or for any
unexpected events or operation, please contact Oricom.
- Store your nasal aspirator as per the storage conditions outline in the specifications
section.
Caution
- Never use on ears, mouth, or eyes.
- The product is not to be used for medical purposes. Should there be any health
related problems, please stop using the product right away and consult a qualified
physician.
- It is strictly prohibited to place the sucker in baby’s nostril for a long time.
- Do not use nasal aspirator if there is any sign of inflammation and or bleeding in
the nose.
- Wash your product after every use.
- Do not wash and clean this product with harsh chemicals or solvents.
Caution
1 2
43 5
Oricom HNA100
User Guide
Keep this user guide for future reference. Always retain your proof
of purchase in case of warranty service.
Intended for use on infants from 2 months old.
Nasal Aspirator
Contents
Safety Information
Safety Information
Intended Use
- This device is designed to remove the nasal mucus in children.
Children who are (typically under the age of 6) unable to remove the nasal
mucus by blowing their noses.
Intended purpose
- To eliminate clogging of the nose
- To ensure nasal breathing to infants
- To relieve childhood allergy-like symptoms by removing the nasal mucus
Introduction
1) Charging
- Power off your nasal aspirator.
- Only charge your nasal aspirator when the LED is flashing red.
- LED flashing red indicates low battery.
① Connect the USB cable to a charging device (DC5V.2A).
② Connect the micro-USB end of the Cable to Nasal aspirator.
③ The LED shows Yellow colour when charging.
④ The LED shows Green colour when charging is complete.
Preparation
① Only use the charging cable supplied by Oricom.
② Charging time is 2 hours.
Caution
1) Preparation of HNA100 prior to use
- Make sure your nasal aspirator is turned off.
How to Use
Press the power button to begin
suction.
④
Product connection
① Combine the connection portion of collection cup with collection
cup. Turn the collection cup in the direction of the arrow to
connect it with the main unit.
②
Connect the suction nose
to the main unit.
Insert O-Ring to
the collection cup.
③
Safety Information Parts and Functions
Cover
LED Indicator
-Charging : Yellow light
-Charged : Green light
-Low battery : Red light
-Working : Green blink
Button (Power, Intensity)
Tip 1
Collection cup
Battery Charging Connector
Tip 2
1
2
5
6
3
4
7
Charging Cable User Guide
Tip 1Main Unit
Tip 2
Oricom HNA100
Us e r Gu ide
Ke e p this us e r guide for future re fe re nce . Alwa ys re ta in your proof
of purchase in ca s e o f warranty se rvice .
Inte nde d for use o n infants from 2 months old.
Nasal Aspirator
76 8
109 11
Disposal
Please dispose of the device in accordance with the directive 2002/96/EC-WEEE
(Waste Electrical and Electronic Equipment). If you have any queries,
please refer to the local authorities responsible for waste disposal.
Used, fully discharged batteries must be disposed of in a specially labeled collection
container, at toxic waste collection points or through an electrical retailer.
You are under legal obligation to dispose of batteries correctly.
IEC/EN60601-1, IEC/EN60601-1-1-6, IEC/EN60601-1-1-2, IEC/EN60601-1-11
Symbol for“CAUTION”
Symbol for“TYPE BF APPLIED PARTS”
Symbol for“MANUFACTURER”
Symbol for“CE MARKING”
Symbol for“EUROPEAN REPRESENTATION”
Symbol for“TEMPERATURE LIMITAION”
Symbol for“HUMIDITY LIMITATION”
Symbol for“ATMOSPHERIC PRESSURE LIMITAION”
Symbol for“WARNING”
Symbol for“FOLLOW INSTRUCTIONS FOR USE”
Symbol for“STAND-BY”
Symbol for“DATE OF MANUFACTURE”
Symbol for“KEEP DRY”
Symbol for“LOT NO.”
Symbol for“Protected against solid foreign objects of 12.5 mm
diameter and greater. Protected against vertically falling water drops
when the device is tilted up to 15 degrees."
Symbol for“DIRECT CURRENT”
HNA-100 is in compliance with the following international regulatory and safety standards.
How to make a claim under your Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
Please call or email our Customer Support Team, 1300 889 785 /
(02) 4574 8888 or support@oricom.com.au.
A Customer Support Team member will verify after troubleshooting with you if your
product qualifies under warrant. If so, they will give you a Product Return Authorisation
number.
We will then email or fax a Return Authorisation form and a Repair Notice (if necessary),
together with instructions on how to return the goods for warranty service.
Please note that if a Customer Support Team member advises that your product does not
qualify for return, this warranty does not apply to your product.
Products that are authorised to be returned to Oricom in Australia must include all of the
following:
A completed Return Authorisation form
A copy of your Proof of Purchase (please keep your original copy)
The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in returning
any faulty product to us. You must arrange and pay any expenses incurred (including
postage, delivery, freight, transportation or insurance of the product) to return the faulty
product to us, however, we will arrange delivery of the repaired or replaced faulty product
to you.
Important Information
Repair Notice
Goods presented for repair may be replaced by refurbished goods or parts of the same
type rather than being repaired.
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support Representatives, each with
the knowledge and resources to assist in answering your questions quickly and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom products, feel
free to contact Oricom or visit our website for answers to frequently asked questions.
1300 889 785
Monday - Friday 8am – 6pm AEST Email: support@oricom.com.au www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 10am - 8pm NZST Email: support@oricom.co.nz www.oricom.co.nz
Open the aspirator cover.
Be sure to place the suction
nose securely on collection
cup.
① Press the power button to
begin suction on level 1.
② Press the power button
again to increase suction to
level 2.
③
Gently place the suction tip
into the baby's nose, and
allow the suction to clear the
mucus.
④ When the suction is
complete, press the power
button once to power off.
⑤ Clean nasal aspirator after
use.
⑥
- Do NOT absorb water or any other liquid.
- Do NOT allow mucus and fluid to exceed 50 percent capacity.
- Make sure nasal aspirator is turned off prior to removing collection cup for cleaning.
- Do NOT submerge in water or any other liquid.
Warning
2) Electronic Suction
Note : When boiling, be careful NOT to completely submerge in the boiling water
to avoid damaging the nose tip.
① To clean the suction nose tip, remove and disinfect in boiling water.
② Make sure that the various components are completely dry.
1) Cleaning the suction nose tip
① Disconnect nose tip and collection cup.
② Wash and disinfect the nose tip and collection cup.
③ Do not immerse the nasal aspirator in liquid. Do not aspirate with anything other than
water.
2) Cleaning After Use
- The lithium-polymer rechargeable battery should be approximately 300 charge cycles.
3) Typical service life
How to Maintain and storage of the Unit
Symptom
No Power Batteries are
completely
discharged.
Motor malfunction
Contact Oricom for accurate diagnosis.
LED shows
Red colour.
Battery is discharged Charge the battery with a charging cable.
There is no suction
at all.
Disconnection Check if the aspirator is properly connected
with the main body, valve, nozzle or
collection cup.
Nozzle Clogging
Motor disorder
Battery is discharged
Make sure to use collection cup after drying.
Contact Oricom for accurate diagnosis.
Check the hours of battery use or state of charge.
Charge the battery with a charging cable.
After suction,
the nasal mucus is
left inside
the main body
after disconnecting
from collection cup.
Low viscosity
mucus has
flowed backward.
Clean around the aspirator with a dry cloth or
cotton swab and keep it clean.
Increase in noise
level when
operating.
Battery is discharged
Possible component
failure
Check if LED shows red colour.
Check the hours of battery use or state of charge.
Charge the battery.
If operating noise levels have increased, contact
Oricom.
Cause Remedy
Troubleshooting
This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369,
Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to as
“Oricom”.
Oricom products come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
Oricom warrants that the product is free from defects in materials or workmanship during
the Express Warranty Period. This Express Warranty does not extend to any product from
which the serial number has been removed or was purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or modifies any condition, warranty,
guarantee, implied term, right or remedy pursuant to the Australian Consumer Law and
which may not be so excluded, restricted or modified. For such conditions, terms,
guarantees and warranties that cannot be excluded, restricted or modified, Oricom limits
the remedies available to extent permitted in the relevant legislation.
The Express Warranty Period will be 1 years from the date of purchase of the product
evidenced by your dated sales receipt. You are required to provide proof of purchase as a
condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the product at our discretion
according to the terms and conditions of this document if your product is found to be
faulty within the Express Warranty Period. This Express Warranty extends to the original
purchaser only and is not transferable.
Products distributed by Oricom are manufactured using new materials or new and used
materials equivalent to new in performance and reliability. Spare parts may be new or
equivalent to new. Spare parts are warranted to be free from defects in material or
workmanship for thirty (30) days or for the remainder of the Express Warranty Period of
the Oricom branded product in which they are installed, whichever is longer. During the
Express Warranty Period, Oricom will where possible repair and if not replace the faulty
product or part thereof. All component parts removed under this Express Warranty
become the property of Oricom. In the unlikely event that your Oricom product has a
recurring failure, Oricom may always, subject to the Competition and Consumer Act
2010, at its discretion, elect to provide you with a replacement product of its choosing
that is at least equivalent to your product in performance.
No change to the conditions of this Express Warranty is valid unless it is made in writing
and signed by an authorised representative of Oricom.Oricom will not be liable under this
Express Warranty, and to the extent permitted by law will not be liable for any defect, loss,
damage or injury arising out of or in connection with a:
1. failure by you to adhere to the warnings and follow the instructions set out in this user
guide for the proper installation and use of the product;
2. wilful misconduct or deliberate misuse by you of the product;
3. any external cause beyond our control, including but not limited to power failure,
lightning or over voltage; or
4. modification to the product or services carried out on the product by anyone other
than Oricom or Oricom’s authorised service provider.
Express Warranty (Australia)
Classification according
to the degree of
protection against
ingress of water as
detailed in the current
edition of IEC 60529
Software version
Typical
Operation Time
Functions
Suction pressure
Rating
Charging source
Dimension
Weight
Button
Components
Type of protection
against
electric shock
Operating Condition
Transport & Storage
Condition
Applied Part
IP 22
v 1.0
No less than 1 hour (continuous, level 2 intensity)
Input 5V , 2A
3.7V (lithium-polymer battery)
62kPa ± 10%
42(w) 192(H) 42(D)ⅹ ⅹ
about 160g (device only)
Power, Intensity ,Ⅰ Ⅱ
Nasal aspirator, Aspirator nose 1, USB Cable, User Guide
Descriptions
Type BF applied parts
Temperature:+5 to +40 / Humidity: 15% to 90%(Non-condensing)℃ ℃
Atmospheric Pressure: 700hPa to 1060hPa
Temperature:-25 to +70 / Humidity: 15% to 90%(Non-condensing)℃ ℃
Nose 1 or 2
SpecificationsHow to Use

Specyfikacje produktu

Marka: Oricom
Kategoria: nieskategoryzowany
Model: HNA100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oricom HNA100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Oricom

Oricom

Oricom HNA100 Instrukcja

26 Maja 2024
Oricom

Oricom VAC500 Instrukcja

20 Maja 2024
Oricom

Oricom CARE620 Instrukcja

10 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024