Instrukcja obsługi Oricom CU850
Oricom
Baby product
CU850
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oricom CU850 (1 stron) w kategorii Baby product. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
CU - -850 2014 09 05
CU 085 PT
User Guide
1.0 Getting started
The CU be850PT baby unit (camera) suits SC850 4.3" Video Baby Monitor. Up to 4 baby units (cameras) can registered
to unit. one parent
2.0 Registering the Baby Unit (Camera)
FOR ALL OTHER INSTRUCTIONS, PLEASE REFER TO YOUR SC850
USER GUIDE.
1.1 Power supply
a) otherConnect small baby the plug power of the adaptor to the unit the and
end to the electrical mains power outlet.
b) To the to the ON switch the unit, on baby slide power switch
position. The power LED will light up.
c) To switch off the baby unit, slide the power switch to the OFF position.
1.2 Connecting and aligning the baby unit
Position the baby unit with a minimum distance of 1m to other electronic devices,
otherwise there is a risk of mutual disturbance. Point the upper section of the baby
unit towards the baby or object you want to monitor. Check that the baby or object is
suitably displayed on the parent unit screen. Ensure the antenna is extended
vertically for optimum range.
Use only the AC with the as other power adaptor supplied product
adaptors could damage the product. This product is designed for
indoor use only.
The parent and baby unit are pre-registered. Registration can also be completed manually: Up to 4 baby units can be
registered to one parent unit. follow the procedure below: To re-register your baby unit, or register a new baby unit,
(1) Switch on the parent unit.
(2) On monitor <Camera> mode, press and hold key for 5
seconds, it will go to registration mode.
(3) [ press After registration icon ] comes up on screen,
<▲> or <▼> to select the camera channel [C1] or [C2] or [C3] or
[C4] that you want the baby unit to pair with.
(4) Press and release <Menu> key to confirm which camera
number to be registered.
(5) The Link LED then flashes rapidly for 10 seconds.
(6) Switch the baby unit ON. Press the pair key once
(at the back of the camera).
(7) If r egistration video is completed, c amera appears on
LCD screen a nd return to normal mode. Baby unit will
return to normal mode too.
(8) If the registration expired registration time is or is failed,
[Out Range] appears on LCD. Should this of occur,
please attempt the registration process once more.
NOTE:
If articular a p channel had been registered al register ready, this
particular over-writ t registration.channel again will e he old
Specyfikacje produktu
Marka: | Oricom |
Kategoria: | Baby product |
Model: | CU850 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Oricom CU850, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Baby product Oricom
16 Września 2024
16 Września 2024
10 Września 2024
9 Września 2024
8 Września 2024
7 Września 2024
Instrukcje Baby product
- Baby product Philips
- Baby product Maxi-Cosi
- Baby product Lionelo
- Baby product Medela
- Baby product Chicco
- Baby product Stokke
- Baby product Intex
- Baby product H.Koenig
- Baby product Chipolino
- Baby product Safety 1st
- Baby product Hauck
- Baby product Microlife
- Baby product Babymoov
- Baby product Telefunken
- Baby product Oregon Scientific
- Baby product Abus
- Baby product Orion
- Baby product Topcom
- Baby product Alecto
- Baby product ADE
- Baby product ABC Design
- Baby product Tigex
- Baby product Brevi
- Baby product Noma
- Baby product Nûby
- Baby product Phil And Teds
- Baby product Bébé-Jou
- Baby product OKBABY
- Baby product Summer Infant
Najnowsze instrukcje dla Baby product
16 Września 2024
13 Września 2024
12 Września 2024
10 Września 2024
9 Września 2024
8 Września 2024
6 Września 2024
6 Września 2024
5 Września 2024
5 Września 2024