Instrukcja obsługi Oregon Scientific RMW128


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oregon Scientific RMW128 (8 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1
GB
RADIO CONTROLLED WATCH
MODEL NO.: RMW128C/ RMW128S
USER’S MANUAL
Congratulations on your purchasing the RMW128C/ RMW128S
Radio-controlled Watch.
The RF Watch is a compact, easy-to-handle device with smart-
looking design. The RMW128C (Classic Design) and RMW128S
(Sport Design) are designed to automatically synchronize its current
time and date when brought within an approximate 1500km radius
of the radio signal generated from Frankfurt, Germany (DCF77).
This unit also comes with features such as Daily Alarm, Stopwatch,
2nd zone-time and Countdown Timer functions as well as EL back
light.
FEATURES AND KEY CONFIGURATIONS
1. MODE BUTTON
-Press to change the display mode
-Press and hold to enter the setting routine
2. ALARM BUTTON
-Press to display the daily alarm function
-Press and hold to enable/disable the alarm
3. START/STOP (UP) BUTTON
-Press to increase the value of a setting
-Press to start or stop the stopwatch function
-Press and hold to enable auto-reception of radio signal
4. SPLIT (DOWN) BUTTON
-Press to decrease the value of a setting
-Press to reset or change the display of the stopwatch function
-Press and hold to disable auto-reception of radio signal
5. LIGHT BUTTON
-Press to turn on the back light for 3 seconds
6. ZONE BUTTON
-Press to change to 2nd zone time and date display
7. WEEKDAY INDICATOR
8. 2ND ZONE-TIME DISPLAY MODE
9. ALARM MODE
10. ALARM-ON INDICATOR
11. STOPWATCH MODE
12. TIMER MODE
13. RADIO RECEPTION INDICATOR
1
2
6 3
5
4
7
89 13 10 11 12
2
GB
BATTERY
The battery is pre-installed at time of manufacture and should be
replaced by authorized dealer only.
Replace the battery when the weekday indicator starts flashing.
BACK LIGHT
Press the LIGHT button to turn on the back light for 3 seconds.
Note: Frequent use of the backlight will shorten the barttery life.
DISPLAY MODES
Press the MODE button to display the following in sequence:
Time with Seconds
Time with Calendar
Zone Time and Date
Daily Alarm
Stopwatch
Countdown Timer
You can also press to display the alarm clock and details.ALARM
Display will return to the last display mode upon release of the
ALARM button.
MODE
3
GB
Press ZONE to display the 2nd zone-time and calender. After 3
seconds the display will return to the Time with seconds display
mode.
ABOUT RADIO RECEPTION
When the unit is within range of its respective radio signals, its
radio-control mechanism will override all manual settings unless
the auto-reception function is mannally disabled by the users.
When the unit is receiving radio signal, the RADIO RECEPTION
icon [ ]will start to blink. A complete reception generally takes
about 2 to 10 minutes, depending on the strength of the radio signal.
After that, the periodical scanning will only take a few seconds.
When the reception is complete, the icon will stop blinking.
For better reception of radio signals, place the watch away from
metal objects and electrical appliances to minimize interference.
To improve the signal reception place the watch on a stable surface
as shown:
NOTES ON RADIO RECEPTION
Signals from other electrical devices such as mobile phones,
computers or other household appliances may cause interference
with this product and results in failure of reception of radio signal.
Metal furniture such as steel table also has similar effect on the
reception. Radio signal reception can also become difficult or even
impossible when the product is situated near radio stations, airports,
in tunnels or underground. This is normal and does not affect the
general performance of the product. In case auto-reception of radio
signal fails, you can manually activate the reception again by pressing
and holding the START/STOP (UP) button for 2 seconds.
To enhance reception of radio signal, you can also:
(a) Move the product to a location which is near to a window; for
optimization you can even leave the product overnight as it will
search for signal automatically at 2:00 am (summer time)/ 3:00
am (winter time); or
(b) Go outdoor and position the product towards the transmission
tower.


Specyfikacje produktu

Marka: Oregon Scientific
Kategoria: Oglądać
Model: RMW128

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oregon Scientific RMW128, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Oglądać Oregon Scientific

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024
Rolex

Rolex Submariner Instrukcja

9 Października 2024
Casio

Casio GW-3000BD-1AER Instrukcja

9 Października 2024
Seiko

Seiko 6N76 Instrukcja

8 Października 2024
Seiko

Seiko 6N53 Instrukcja

8 Października 2024
Seiko

Seiko 6N52 Instrukcja

8 Października 2024
Seiko

Seiko 6G28 Instrukcja

8 Października 2024
Seiko

Seiko 4N30 Instrukcja

8 Października 2024
Seiko

Seiko 4227 Instrukcja

8 Października 2024
Seiko

Seiko 6N32 Instrukcja

8 Października 2024