Instrukcja obsługi Oregon Scientific RM338SP


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oregon Scientific RM338SP (9 stron) w kategorii zegar. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
1
GB
INTRODUCTION
Congratulations on the RF Projectionpurchasing RM338SP
Clock. The is a feature-packed device whichRM338SP
automatically synchronizes its current time and date when
it is brought within an approximate 1500km radius of the
radio signal generated from Frankfurt, Germany (DCF77).
To facilitate reading , the comes with anat night RM338SP
adjustable projector which can project the time in large,
readable figures on the wall or ceiling in dark. Or you can use
its backlight function for a quick check.
The RM338SP is primarily radio-controlled. However, it
allows you to enter data manually when it is orange.
Other features include -language display, four-step cre-4
scendo dual alarms, -minute snooze and interchangeable8
display modes.
RF PROJECTION CLOCK
Model: RM338SP
User Manual
FRONT VIEW
REAR VIEW
TOP VIEW
PROJECTION
ON SWITCH
FOCUS KNOB
PROJECTOR
2
GB
MAIN FEATURES
RADIO RECEPTION SIGNAL
Indicates the condition of radio reception
SNOOZE BUTTON
Enables or disables the snooze function when an alarm
goes off or activates the backlight and projector for 8
seconds
TWO-LINE DISPLAY
Displays the local time and second time zone in four
selectable modes
ZONE ICON [ ]
Appears when the second time zone is displayed
ALARM ICONS [ ]
Appear when the respective alarm is activated
PROJECTOR
For projecting the current time on the wall or ceiling
FOCUS KNOB
Adjusts the focus of the projector
PROJECTION ON SWITCH
Used with the power adapter to enable extended use of
the projector
BATTERY COMPARTMENT
Accommodates 2 or UM3 or "AA" size batteries for
operation
UP [ ] AND DOWN [ ] BUTTONS
Increases or decreases the value of a setting
[ ] BUTTON
Sets the time for the alarms
[ ] BUTTON
Enables or disables the alarms
[ MODE/SET ] BUTTON
Toggles the display modes and confirms entry while
setting the values for display
BATTERY INSTALLATION
1. Slide open the battery compartment on the back of
the unit.
2. Insert 2 x UM3 or "AA" size batteries.
3
GB
3. Replace the battery compartment door.
Under normal circumstances, the batteries are good for
1 year. However, the battery life can be reduced vastly
by frequent use of the backlight, projector and snooze
function.
Replace the batteries when Low battery indicator appears
on the the LCD display.
HOW TO USE THE PROJECTOR
1. Keep pressing the BUTTON. The backlightSNOOZE
and projector will turn on.
2. Adjust the angle of the projector for a good projection on
the wall or ceiling.
3. Use the FOCUS KNOB to adjust the focus of the
projection.
After the projector is adjusted, to use the projector,
simply press the BUTTON once. The projectorSNOOZE
will come on for five seconds before automatically switch-
ing off.
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your unit comes with a power adapter so you can use the
projector for extended period of time.
To install the adapter :
1. Slide open the battery compartment.
2. Plug the adapter into the adapter socket.
3. Replace the battery compartment door.
4. Making sure the voltage is correct, plug the other end of
the power adapter into a free wall socket.
Once the power adapter is in place, you can select to turn on
the projector for a longer period of time, such as throughout
the night, by sliding out the LIGHT ON SWITCH on the
back of the unit. To turn off the projector, slide the switch
back.
Note that this switch can only be used with the power adapter
installed. For momentary projection, use the
SNOOZE BUTTON.
HOW TO USE THE BACKLIGHT
Press the BUTTON once. The backlight willSNOOZE turn
on for 8 seconds.


Specyfikacje produktu

Marka: Oregon Scientific
Kategoria: zegar
Model: RM338SP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oregon Scientific RM338SP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zegar Oregon Scientific

Instrukcje zegar

Najnowsze instrukcje dla zegar