Instrukcja obsługi Opticon Nlv-1001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Opticon Nlv-1001 (151 stron) w kategorii Barcode lezer  . Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/151
Set up your personal configuration
bar code configuration
and commands manual
OPTICON Universal menu book
Ui
Universal menu book
ver. 12 © December 2009
Set up your personal configuration
bar code configuration
and commands manual
OPTICON Universal menu book
Uii
CAUTION: This information is subject to
change without prior notice.
Copyright 2006, Opticon Sensors Europe
B.V. All rights reserved.
This manual may not, in whole or in part, be
copied, photocopied, reproduced, translated or
converted to any electronic or machine
readable form without prior written consent of
Opticon Sensors Europe.
LIMITED WARRANTY AND DISCLAIMERS
Under all circumstances this manual should be
read attentively, before installing and or using
the product.
Serial number
A serial number appears on all Opticon
products. This official registration number is
strictly related to the device purchased. Make
sure that the serial number appearing on your
Opticon device has not been removed.
Removing the serial number might affect the
warranty conditions and liability
disadvantageously, so please be strict at
maintaining the label with serial number on the
Opticon product.
Warranty / Warranty period / Liability
Unless otherwise agreed in a contract, all
Opticon products are warranted for the period
of two years after purchase, covering defects in
material and workmanship. Opticon will repair
or, at its opinion, replace products that prove to
be defective in material or workmanship under
proper use during the warranty period. Opticon
will not be liable in cases where modifications
are made by the customer. In such case the
standard repair charge will be applicable. The
standard charge for repair will also be
applicable in cases where no defect is found at
all. These rules also apply for products that are
still under warranty. Under no circumstance will
Opticon Sensors Europe, be liable for any
direct, indirect, consequential or incidental
damages arising out of use or inability to use
both the hardware and software, even if
Opticon has been informed about the possibility
of such damages.
Packaging
The packing materials are not harmful for the
environment. We recommend that you save all
packing material, as it should be used
whenever you need to transport your scanner
(eg. for service). Damage caused by improper
repacking is not covered by the warranty.
Trademark
Trademarks used are property of their
respective owners.

Specyfikacje produktu

Marka: Opticon
Kategoria: Barcode lezer  
Model: Nlv-1001

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Opticon Nlv-1001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Barcode lezer   Opticon

Opticon

Opticon OPN2005 Instrukcja

2 Października 2024
Opticon

Opticon OPR3201 Instrukcja

2 Października 2024
Opticon

Opticon H-29 Instrukcja

2 Października 2024
Opticon

Opticon H-27 Instrukcja

2 Października 2024
Opticon

Opticon H22-2D Instrukcja

2 Października 2024
Opticon

Opticon H-21 1D Instrukcja

2 Października 2024
Opticon

Opticon OPN2002 Instrukcja

2 Października 2024
Opticon

Opticon PX-36 Instrukcja

2 Października 2024
Opticon

Opticon Nlv-1001 Instrukcja

2 Października 2024
Opticon

Opticon MDC-200 Instrukcja

2 Października 2024

Instrukcje Barcode lezer  

Najnowsze instrukcje dla Barcode lezer  

Newland

Newland Akame FR4060 Instrukcja

2 Października 2024
Newland

Newland NLS-EM2028 Instrukcja

2 Października 2024
Newland

Newland EM3000V2-F Instrukcja

2 Października 2024
Atlantis Land

Atlantis Land A08-C100 Instrukcja

2 Października 2024
Psion

Psion Neo Instrukcja

30 Września 2024
IFM

IFM O2I420 Instrukcja

29 Września 2024