Instrukcja obsługi Optex SL-650QDP

Optex nieskategoryzowany SL-650QDP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Optex SL-650QDP (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

PHOTOELECTRIC DETECTOR

BASIC MODELS

SL-200QN

SL-350QN

SL-650QN

: 60m / 200ft.

: 100m/ 350ft.

: 200m/ 650ft.

STANDARD MODELS

SL-200QDP

SL-350QDP

SL-650QDP

: 60m / 200ft.

: 100m/ 350ft.

: 200m/ 650ft.

ADVANCED MODELS

SL-200QDM

SL-350QDM

SL-650QDM

: 60m / 200ft.

: 100m/ 350ft.

: 200m/ 650ft.

HARD-WIRED MODELS

STANDARD MODEL

SL-350QFR : 100m / 350ft.

BATTERY OPERATED MODELS

BASIC MODEL

SL-350QNR : 100m / 350ft.

BEAM TOWER MODELS

SL-200QDP-BT

SL-350QDP-BT

SL-650QDP-BT

: 60m/200ft．

: 100m/350ft.

: 200m/650ft.

BEAM TOWER MODEL

SL-350QFR-BT : 100m/350ft.

78.5

447.2

84.6

ABC-4

OPTIONS

Anti Bird Cap

for

• SL-200QDM/350QDM/650QDM

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QN

• SL-350QFR/SL-350QNR

100

78.5

84 10

(mm)

Back cover

for

• SL-200QDM/350QDM/650QDM

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QN

• SL-350QFR/350QNR

(mm)

458.5

138

452

*2sets (4 units) are used for SL series.

0.6

Actual length 150

Motor Head

Controller

Dimensions (HxWxD):

180mm x 120mm x 45mm

Conduit Bracket

for

• SL-200QDM/350QDM/650QDM

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QN

(mm)

Pole Side Cover

for

• SL-200QDM/350QDM/650QDM

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QN

• SL-350QFR/350QNR

(mm)

Share power source and low

battery signals

between the main unit and the

wireless transmitter.

for

• SL-350QFR/350QNR

Heating Unit

for

• SL-200QDM/350QDM/650QDM

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QN

(mm)

1set(2units)

Power input

Current draw

Thermo switch

24VAC/DC

420mA(max.) (Per 1 unit)

60°C (140°F)

Extension Cable with

Connector

for

• SL-350QFR/SL-350QNR

Up to

150mm

BC-4 PSC-4

CBR-4 HU-3 BCU-5

BAU-4 EC-4

Beam Alignment Unit

for

• SL-200QDM/350QDM/650QDM

(applicable to receiver and transmitter)

• SL-200QDP/350QDP/650QDP

• SL-200QN/350QN/650QM

• SL-350QFR/350QNR

• SL-200QDP-BT/350QDP-BT/650QDP-BT

• SL-350QFR-BT/350QNR=BT

(applicable to receiver only)

Aligns optical axis automatically.

Input voltage

Low battery input (EX+/-)

Current draw

Output voltage

Output current

Operating temperature

Operating humidity

Normal

Low battery

Approx. 3.0 - 3.6VDC

Approx. 2.0 - 2.6VDC

3.2 - 4.0 VDC

N.C. input only

Approx. 5 μA at 3.6 VDC (no load)

100 mA (max.)

-20°C - +60°C (-40°F - +140°F)

95% (max.)

OPTEX CO., LTD. (JAPAN)

URL: http://www.optex.net

OPTEX DO BRASIL LTDA. (Brazil)

URL: http://www.optex.net/br/es/sec

OPTEX (EUROPE) LTD. / EMEA HQ (U.K.)

URL: http://www.optex-europe.com

OPTEX TECHNOLOGIES B.V. (The Netherlands)

URL: http://www.optex.eu

OPTEX INC. / AMERICAS HQ (U.S.)

URL: http://www.optexamerica.com

OPTEX SECURITY Sp.z o.o. (Poland)

URL: http://www.optex.com.pl

OPTEX PINNACLE INDIA, PVT., LTD. (India)

URL: http://www.optex.net/in/en/sec

OPTEX KOREA CO.,LTD. (Korea)

URL: http://www.optexkorea.com

OPTEX SECURITY SAS (France)

URL: http://www.optex-security.com

OPTEX (Thailand) CO., LTD. (Thailand)

URL: http://www.optex.net/th/th

OPTEX (DONGGUAN) CO.,LTD.

SHANGHAI OFFICE (China)

URL: http://www.optexchina.com

By employing quad beam, it dramatically reduces false alarm caused by birds and falling

leaves. Moreover, it is also important that the housing design of both long and short beams is

harmonised. 60m (200ft.) range models, SL-200QN/SL-200QDP/SL-200QDM with a wide

beam pitch is now available.

The SL-QDM and SL-QDP series offer double modulation beams that differ in pulse

patterns. This can enhance signal discrimination against potential noise interference such

as sunlight or other external light sources, resulting in a reduction of missed or false alarms.

Together with OPTEX triple layered Sunshine Protection Technology, it ensures high

reliability under the severe outdoor security environment.

QUAD BEAM & UNITED APPEARANCE

ANTI FROST DESIGN

(Hood design)

The hoods are positioned on both the

upper beam and the lower beam to

secure a high and stable beam power by

preventing frost from attaching to the

front cover.

BEAM BLOCKING PLATE

The plate can firmly be fixed on the lens

unit without fear to be blown off by wind.

The plates can be stored in the back of

the front cover.

SLIM BODY & LIGHT WEIGHT

20% reduction of the body size and 15%

reduction of the weight come together in

the SL series.

The high-grade aspherical lens create

more sharply defined and precise active

infrared beams.

QUAD BEAM WITH

ASPHERICAL LENSES

Easy-to-see vivid interior color for optical

alignment.

VIVID INTERIOR COLOR

The alignment no longer requires a

screwdriver. All you need is touch with

your fingers for precise adjustment.

ALIGNMENT DIAL

The BAU-4 beam alignment unit

automatically and accurately adjusts

the optical axis. This allows peak

performance and gives one

technician the ability to install the

200 m (650 ft.) Smart Line detector

by himself.

BEAM ALIGNMENT UNIT : BAU-4 (option)

SNIPER VIEWFINDERTM

X2 MAGNIFICATION LENS

X2 magnification lensConventional model

RECEIVERTRANSMITTER

Rubber seals is used for all conceivable

points where water or dust may

penetrate, such as wiring holes, wire

ports and the outer openings on chassis.

IP65 WATER/DUST PROTECTION

Front cover is not clouded by ultraviolet

ray during a long term. Therefore it will

maintain the transparency of IR beams.

UV-resistant

POLY CARBONATE COVER

CONVENTIONAL SL series

The alignment level indicators have 5 LEDs, each LED represents the

level of alignment, ranging from poor to excellent. The optical alignment

level can also be checked by sound.

SL-QDM:TRANSMITTER AND RECEIVER

SL-QDP: RECEIVER only

LED INDICATOR AND SOUND ASSIST

Optical alignment can be done without using a beam

blocking plate since the SL has upper/lower beam

selection button which enables to turn on and off the

upper and lower beam alternately in the installation mode.

SL-QDM/SL-QDP only:

TRANSMITTER AND RECEIVER

UPPER/LOWER

BEAM SELECTION BUTTON

Anyone can LOCK ON,

SHUT OUT ANY TROUBLESAutomatically LOCK ON.

HORIZONTAL

The new telescope lens has a high level of

visibility for optical alignment work. Even over

long distances, a perfect installation and stable

performance can be achieved in a short period.

The IR transmitter and receiver must be perfectly aligned in order to achieve the optimal operation of the

photoelectric detector. However, a great deal of patience, time and effort is required to ensure that the receiv-

er is receiving the maximum amount of infrared signal possible from the transmitter.

Optex has the solution the SL series is designed to lighten your workload while achieving perfect alignment.

Double Modulation Beam（SL-QDM/QDP only)

Transmitter Receiver

Sunlight

1st Pulse

2nd Pulse

mercury-vapor lamp

Smartline seriesConventional short beam

THE world first

AUTOMATIC

BEAM ALIGNMENT

ENVIRONMENT RESISTANCE SELECTION GUIDE

A.T.P.C.-AUTOMATIC TRANSMIT POWER CONTROL (SL-QDM only)

Automatically controls, adjusts and optimizes the power of the beam and maintains optimal performance.

It decreases false and missed alarms caused by fog, frost, cross talk, and signal saturation.

Decreased beam power

because of dense fog

FOG

Boost beam power

Beam Power UP

Caused over beam power by

the reflection from wall

signal level

Time

Sun(noise)

IR Beams(signal)

Increase signal level to avoid signal saturation

signal level

Time

Sun(noise)

IR Beams(signal)

BEAM POWER CONTROL SELECTOR (SL-QDM/SL-QDP only)

To reduce beam power when using the detector

for a distance shorter than the rated distance.

To search the peak value when making optical

alignment to support perfect alignment.

For countermeasure against interference due to unstable

S/N (signal / noise) ratio when using multiple photo beams

for long distance or beam stacking applications.

The beam power control selector allows you to manually adjust beam power from

NORMAL to LOW or VERY LOW. This function is effective for the following purposes:

VERY LOW

LOW

NORMAL

LOW

NORMAL VERY LOW

For countermeasure against crosstalk due to reflection of

wall or floor by reducing beam power.

SUNSHINE PROTECTION TECHNOLOGY (SL-QDM/SL-QDP only)

The sunshine protection technology has a triple layer construction to give better performance against external light sources

(e.g.:The sun, mercury-vapour lamps, and fluorescent lights).

31 2

HARD-WIRED MODELS

ADVANCED STANDARD BASIC STANDARD BASIC

REFLECTION

INTERFERENCE

FOG

LIGHTNING

FROST

RE-TRANSMISSION

FUNCTION

LED INDICATOR

AND

SOUND ASSIST

BATTERY OPERATED MODELS

SL-200QDM

SL-350QDM

SL-650QDM

SL-200QDP

SL-350QDP

SL-650QDP

SL-200QN

SL-350QN

SL-650QN

SL-350QFR SL-350QNR

(Expected impact :False alarm)

The light disturbance

compensation circuit

differentiates original

double modulated beams

from other external light

sources.

The photodiode

devices with IR bandpass

filter to transmit

only the same wavelength

of the IR beams.

The front cover with

special filter materials

to remove visible

lights.

1 2 3

Decrease signal level (Signal saturation)

due to rising sun or sunset which enter to the receiver

at the same angle as the transmitted IR beams.

(Expected impact :Unit damage)

(Expected impact :False alarm)

(Expected impact :Missed alarm)

Patent

pending

Most appropriate

Appropriate

Transmit power control signal

POWER UP

Transmit power control signal

POWER DOWN

Beam Power DOWN

Reduce beam power to avoid

unnecessary reflection

TX TX

TX RX

LIGHT

DISTURBANCE

WIRELESS

BEAM TOWER

MOUNTING

(BATTERY OPERATED)

WIRED

SL-200QDP-BT

SL-350QDP-BT

SL-650QDP-BT

BATTERY

OPERATED

SL-350QFR-BT

Specyfikacje produktu

Marka:	Optex
Kategoria:	nieskategoryzowany
Model:	SL-650QDP
Kolor produktu:	Czarny
Wysokość produktu:	448 mm
Szerokość produktu:	79 mm
Głębokość produktu:	96 mm
Waga produktu:	2400 g
Stopień ochrony IP:	IP65
Maksymalne natężenie prądu:	0.2 A
Temperatura otoczenia:	-35 °C
Temperatura otoczenia (max):	60 °C
Zakres przesyłu danych:	200 - 2000 m