Instrukcja obsługi Onkyo VC-FLX1

Onkyo głośnik VC-FLX1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Onkyo VC-FLX1 (25 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/25
En
Voice Control Speaker with Camera VC-FLX
VC-FLX1
Instruction Manual Cautions and Disclaimers .......................................2
Safety Precautions .....................................................2
Disclaimers, Trademarks, etc. ...................................4
Parts Name ...............................................................6
Light Ring Status .......................................................8
Preparation and Setup ............................................9
Initial Setup and Pairing ........................................10
Items on Home Screen ..........................................13
Setting Manager Screen ..........................................14
Sensors Manager screen .........................................15
Rules Manager Screen ............................................18
History Screen .........................................................19
Using the unit .........................................................20
Enjoying Audio Source ............................................20
Live Video ................................................................21
Amazon Alexa ..........................................................22
Sensors on the unit ..................................................22
Troubleshooting ....................................................23
Specifications ........................................................24
2
Cautions and Disclaimers
Safety Precautions
The rating plate is on the bottom of the product.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT OF AC POWER OUTLET, THEN
FULLY INSERT.
Warnings:
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash hands
after handling.
Do not expose the product to liquids. Do not place items
containing liquid on top of the product, such as glasses or
vases.
Keep the product away from direct sunlight, extreme cold, or
heat sources. Exposure to extreme temperatures may
damage or reduce the life of the product.
IMPORTANT SAFETY INSTRUCTIONS
1. Do not use this product near water.
2. Clean only with a dry cloth.
3. Do not block any of the ventilation openings.
4. Do not install near any heat sources such as radiators,
heat registers, stoves, or other devices that produce heat.
5. Protect the AC adapter and cord from being on damaged
or pinched.
6. Only use approved attachments/ and accessories.
7. Unplug this product during lightning storms.
8. Refer all servicing to qualified service personnel.
Servicing is required when the product has been damaged
in any way, including when the power cord or plug is
damaged, liquid has been spilled or objects have fallen
into the product, the product has been exposed to rain or
moisture, the product does not operate normally, or the
product has been dropped.
9. Never pull on a power cord/cable to remove a plug from a
socket. Always grasp the plug directly. Failure to follow this
instruction may damage the cord/cable, and/or result in a
fire or electric shock, possibly resulting in serious injury.
Always confirm that the power plug (and extension cable
plug if used) has been fully inserted into the socket, to
ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury. Be careful if you use a multiple connector.
An overload on one socket could cause a fire or electric
shock, possibly resulting in serious injury.
Critical Applications
This product is not designed for any "critical applications."
"Critical applications" means life support systems, medical
applications, connections to implanted medical devices,
commercial transportation, nuclear facilities or systems or
any other applications where product failure could lead to
injury to persons or loss of life or catastrophic property
damage.
ACCORDINGLY, ONKYO Corporation, ITS AFFILIATES
AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY
ARISING OUT OF THE USE OF THE PRODUCT IN ANY
CRITICAL APPLICATIONS. IF YOU USE THE PRODUCT
IN A CRITICAL APPLICATION, YOU, AND NOT ONKYO
Corporation, ASSUME FULL RESPONSIBILITY FOR
SUCH USE.
ADDITIONAL SAFETY INSTRUCTIONS
1. If the product should emit smoke or an unusual odor,
immediately disconnect the AC adapter from the wall outlet
and obtain service from an authorized service provider.
USA
Federal Communications Commission Statement
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that may cause undesired operation
Interference
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
0Reorient or relocate the receiving antenna.
0Increase the separation between the equipment and
receiver.
0Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
0Consult the dealer or an experienced radio/TV technician
for help.
0Bluetooth® and Wireless LAN devices operate within the
same radio frequency range and may interfere with one
another. If you use Bluetooth and Wireless LAN devices
simultaneously, you may occasionally experience a less
than optimal network performance or even lose your
network connection. If you should experience any such
problem, immediately turn off your Bluetooth or Wireless
LAN device.
Wireless Radio
Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in
the 5.15 GHz to 5.25 GHz frequency range. FCC requires
this product to be used indoors for frequency range 5.15 GHz
to 5.25 GHz to reduce the potential for harmful interference
to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25
GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These
radar stations can cause interference with and/or damage
this device.
3
En
Important: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment. This device
and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Notice "Declaration of Conformity Information"
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, it may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
0Reorient or relocate the receiving antenna.
0Increase the separation between the equipment and
receiver.
0Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
0Consult the dealer or an experienced radio/TV technician
for help.
Changes or modifications made to this equipment not
expressly approved by ONKYO Corporation or parties
authorized by ONKYO Corporation could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Wireless LAN and Your Health
Wireless LAN products, like other radio devices, emit radio
frequency electromagnetic energy. The level of energy
emitted by Wireless LAN devices however is far much less
than the electromagnetic energy emitted by wireless devices
such as mobile phones.
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards and
recommendations, ONKYO Corporation believes Wireless
LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific
community and result from deliberations of panels and
committees of scientists who continually review and interpret
the extensive research literature.
In some situations or environments, the use of Wireless LAN
may be restricted by the proprietor of the building or
responsible representatives of the organization if the risk of
interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment,
you are encouraged to ask for authorization to use the
Wireless LAN device prior to turning on the equipment.
Bluetooth® Wireless Technology and Your Health
Products with Bluetooth
® wireless technology, like other radio
devices, emit radio frequency electromagnetic energy. The
level of energy emitted by devices with Bluetooth wireless
technology however is much less than the electromagnetic
energy emitted by wireless devices such as mobile phones.
Because products with Bluetooth wireless technology
operate within the guidelines found in radio frequency safety
standards and recommendations, ONKYO Corporation
believes Bluetooth wireless technology is safe for use by
consumers.
These standards and recommendations reflect the
consensus of the scientific community and result from
deliberations of panels and committees of scientists who
continually review and interpret the extensive research
literature.
In some situations or environments, the use of Bluetooth
wireless technology may be restricted by the proprietor of the
building or responsible representatives of the organization if
the risk of interference to other devices or services is
perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment,
you are encouraged to ask for authorization to use the device
with Bluetooth wireless technology prior to turning on the
equipment.
PRECAUTIONS
Notes on handling
0When shipping the product, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the product as it was originally packed
at the factory. Take care not to give it a shock or shake
when carrying.
0Do not use volatile liquids, such as insect spray, near the
product. Do not leave rubber or plastic products in contact
with this product for a long time. They will leave marks on
the finish.
0The product may become warm after a long period of use.
This is not a malfunction.
0When the product is not in use for a long period,
disconnect the power.
0If you do not use the product for a long period, the product
may not function properly. Turn on and use the product
occasionally.
Notes on locating
0Place the product on a level surface. Do not use it on a
shaky or unstable surface such as a wobbling table or
inclined stand.
0When you place this product near a TV, radio, or VCR, the
playback picture may become poor and the sound may be
distorted. In this case, place the product away from the TV,
radio, or VCR.
0Do not use this product in places which are extremely hot,
cold, dusty or humid.
0Do not restrict the air flow of this product by placing
somewhere with poor air flow, by covering it with a cloth, or
by placing it on bedding or carpeting.

Specyfikacje produktu

Marka: Onkyo
Kategoria: głośnik
Model: VC-FLX1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Onkyo VC-FLX1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Onkyo

Onkyo

Onkyo D-407M Instrukcja

16 Września 2024
Onkyo

Onkyo HTP-2S Instrukcja

10 Września 2024
Onkyo

Onkyo SKS-4700 Instrukcja

9 Września 2024
Onkyo

Onkyo SKS-3600 Instrukcja

4 Września 2024
Onkyo

Onkyo D-407F Instrukcja

3 Września 2024
Onkyo

Onkyo D-309H Instrukcja

3 Września 2024
Onkyo

Onkyo SKS-HT230 Instrukcja

30 Sierpnia 2024
Onkyo

Onkyo SKR-L500 Instrukcja

29 Sierpnia 2024
Onkyo

Onkyo SKS-101 Instrukcja

29 Sierpnia 2024
Onkyo

Onkyo Smart Speaker G3 VC-GX30 Instrukcja

28 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Streetz

Streetz CM717 Instrukcja

20 Marca 2025
Streetz

Streetz CM715 Instrukcja

20 Marca 2025
Streetz

Streetz CM716 Instrukcja

20 Marca 2025
SOUNDBOKS

SOUNDBOKS The Battery Instrukcja

20 Marca 2025
ETON

ETON HEX 165 Instrukcja

19 Marca 2025
ETON

ETON PRW 50 Instrukcja

19 Marca 2025
ETON

ETON PFX 10 Instrukcja

19 Marca 2025
ETON

ETON PRA 80 Instrukcja

19 Marca 2025
ETON

ETON PFX 16 Instrukcja

19 Marca 2025
Manta

Manta SPK12GO Instrukcja

19 Marca 2025