Instrukcja obsługi Onkyo SKF-3600

Onkyo głośnik SKF-3600

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Onkyo SKF-3600 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
En
Speaker System
SKF-3600
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new speaker system.
Please retain this manual for future reference.
Contents
Supplied accessories 2
Using the included
speaker bases 2
Placement 2
Connections 3
Precaution on use 3
Speaker care 4
Use with a TV set or
computer 4
Specifications 4
2
SKF-3600 (front speaker)
× 2
Speaker cord
× 2 (red, white: 3.5m)
Speaker base
× 2
Screws
× 6
Front left and right speakers
Output overall sound. They play the most important role
in a home theater system, by creating basic sound
images and fields.
Place the front speakers in front of the listener so that
they point to the listener’s ears in the listening position
for music and movies. Ideal speaker placement is so that
they are located symmetrically.
The speaker cabinet is made of wood and sensitive to
extreme temperatures and humidity. Avoid placing the
speaker system in locations subjected to direct sunlight
or in humid places such as near an air conditioner, bath-
room, or kitchen.
Before making speaker connection, attach the supplied
speaker bases to the SKF-3600.
1. Turn the speaker upside down.
2. Match the screw halls on the speaker base to those
on the speaker, and fix the base to the speaker using
screws.
SAFETY PRECAUTIONS:
• When attaching the speaker bases, work with them on
a flat, level, and solid floor.
• After attached the speaker bases, verify that the
speakers stand upright and stably.
Using the speaker cable hook
The supplied speaker base has a speaker cable hook. It
is recommended that you hook the cables on the hook to
avoid cable congestion.
Supplied accessories
Placement
Using the included speaker bases
3
• Be sure to turn off your amplifier before connecting
the speaker system. Connecting it while the amplifier
is on may result in damage to the amplifier or the
speaker system.
• The nominal impedance of this speaker system is 8
Ω
.
Use only amplifiers capable of handling this imped-
ance.
• Use the supplied speaker cables to connect between
the speaker’s input terminals and the amplifier’s
speaker terminals as illustrated below.
• Be sure to connect the Right and Left speakers with
the amplifier’s corresponding speaker terminals.
Also, be sure that you are connecting the speaker’s
positive (+) and negative (–) input terminals with the
amplifier’s corresponding positive and negative
speaker terminals. Otherwise, undesirable sound field
or impaired bass-range reproduction will result.
• Before turning on the amplifier’s power switch, pull
lightly on the speaker cables to ensure that they are
connected securely.
• To prevent damage to circuitry,
never short-circuit the positive
(+) and negative (–) speaker
wire.
• This speaker system can handle the specified input
power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the
speaker, however, an overcurrent may flow in the
internal circuits, causing burning or breakage of the
wires even if the input power is below the specified
rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or disconnect-
ing audio connection cables (Always turn off the
amplifier’s power before connecting or discon-
necting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as screwdrivers
and iron parts near the speaker system since they use
speakers with strong magnets. Otherwise, the objects
may be attracted, causing injury or damaging the dia-
phragm.
Connections
SURRO UND BACK
SPEAKER
FRONT
SPEAKERS SURROUND
SPEAKERS CENTER
SPEAKER
R
L
R
L
A B
R
L
SKF-3600
Front right
speaker
SKF-3600
Front left
speaker
SKC-3600
Center speaker
SKM-3600
Surround right
speaker
SKM-3600
Surround left
speaker
Red White
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert
the wire into the hole, and then
release the lever.
3. Make sure that the terminals
are gripping the core wires, not
the insulation.
Both SKC-3600 and SKM-3600 come with SKS-3600.
Precaution on use

Specyfikacje produktu

Marka: Onkyo
Kategoria: głośnik
Model: SKF-3600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Onkyo SKF-3600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Onkyo

Onkyo

Onkyo D-407M Instrukcja

16 Września 2024
Onkyo

Onkyo HTP-2S Instrukcja

10 Września 2024
Onkyo

Onkyo SKS-4700 Instrukcja

9 Września 2024
Onkyo

Onkyo SKS-3600 Instrukcja

4 Września 2024
Onkyo

Onkyo D-407F Instrukcja

3 Września 2024
Onkyo

Onkyo D-309H Instrukcja

3 Września 2024
Onkyo

Onkyo SKS-HT230 Instrukcja

30 Sierpnia 2024
Onkyo

Onkyo SKR-L500 Instrukcja

29 Sierpnia 2024
Onkyo

Onkyo SKS-101 Instrukcja

29 Sierpnia 2024
Onkyo

Onkyo Smart Speaker G3 VC-GX30 Instrukcja

28 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025