Instrukcja obsługi NUVO Dupont 60/1854

NUVO Verlichting Dupont 60/1854

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NUVO Dupont 60/1854 (2 stron) w kategorii Verlichting. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
ASSEMBLY INSTRUCTION
SKU#60/1833 60/1834, 60/1835, 60/1853, 60/1854, 60/1855 ,
NOTE: Please consult a qualied electrician if you are not certain of installation or servicing.
CAUTION: Before starting installation or servicing, disconnect power by turning off the circuit breaker or
by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Insert Plastic Nuts into the wall, and fasten the Mounting Strap to the wall by threading Self-threading
Screws into Plastic Nuts.
3. Connect wires white to white and black to black. Cover connections with provided Wire Connectors. Tie
ground wires from Outlet Box and from xture to the Ground Screw on the Mounting Strap.
4. Place xture body against wall by aligning the protruding Mounting Screws all the way through Wall Plate
and tighten the Lock Nuts to the Mounting Screws until the xture body is held rmly against the wall.
5. Unscrew Socket Rings from Sockets. Place Shades over Sockets and reattach Socket Rings to Sockets to
secure the Shades.
6. Install Bulbs. (Not included).
7. Turn on power.
A Satco Product
INSTRDCCIÓN DE ASAMBLEA
SKU#60/1833, 60/1834, 60/1835, 60/1853, 60/185 60/1855 4,
NOTE: Por favor, Consulte con un electricista cacado en caso de que esté seguro de la instalación.
CAUCIÓN: Antes de comenzar la instalación, cortar l electricidad mediante apagar el cortacircuitos o a
quitar el fusible desde la caja de fusible.
1. Desempaquetar cuidadosamente la instalación, disponer todas las piezas sobre una supercie límpia.
2. Inserte las Tuercas de Plástico en la pared, y abroche la correa de Montaje a la pared pasando los Tornillos
de Autoroscado en las Tuercas de Plástico.
3. Conectar el cable blanco con blanco y negro con negro, cubrir las conexiones usando los conectores de
cables que se proporcionan. Atar los cables de tierra desde la Cja de Salida y desde la instalación al
Tornillo de Tierra que hay en la Correa de Montaje
4. Colocar el cuerpo de la instalación contra la pared alineando los Tornillos de Montaje protuberantes
directamente a través de la Placa de la Pared y apretar las Tuercas de Cierre a los Tornillos de Montaje
hasta que el cuerpo de la instalación esté fírmemente sujeto contra la pared.
5. Desatornillar los Aros del Zócalo desde los Zócalos. Coloque las Pantallas sobre los Zócalos, reacoplar los
Aros y Aros del Zócalo en los Zócalos para jar las Pantallas.
6. Instalar las bombillas. (No incluídas).
7. Activar la electricidad.
INSTRUCTIONS DE MONTAGE
SKU#60/1833, 60/1834, 60/1835, 60/1853, 60/1854, 60/1855
REMARQUE : Si vous avez des incertitudes quant à l'installation, demandez de l'aide à un électricien
qualié.
ATTENTION : Avant de commencer l'installation, déconnectez l'alimentation électrique avec le
disjoncteur ou en retirant le fusible du disjoncteur. Calfeutrer la surface de montage au sommet et sur les côtés.
1. Déballez soigneusement le luminaire et placez toutes les pièces sur une surface propre.
2. nsérez les Ecrous en plastique dans le mur et xez la Plaque de montage au mur en vissant les Vis I
auto-taraudeuses dans les Ecrous en plastique.
3. Connectez les ls blanc sur blanc et noir sur noir, couvrez les connexions à l'aide des connecteurs de ls
fournis. Attachez les ls de terre du Coffret de prise de courant de la lampe sur la Vis de terre sur la Bande
de montage.
4. Placez le corps du luminaire contre le mur en alignant les Vis de montage qui ressortent sur toute la longueur
de la Plaque murale et xez la lampe à l'aide des deux Contre-écrous jusqu'à ce le corps du luminaire soit
fermement appliqué contre le mur.
5. Dévissez les Anneaux à douille et les Anneaux des Douilles. Placez les Abat-jours sur les Douilles, et
remettez en placez les Anneaux et les Anneaux à douille de façon à maintenir les Abat-jours en position.
6. Installez l'ampoule. (Non fournie)
7. Allumez l'électricité.

Specyfikacje produktu

Marka: NUVO
Kategoria: Verlichting
Model: Dupont 60/1854

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NUVO Dupont 60/1854, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Verlichting NUVO

NUVO

NUVO Bento 60/4084 Instrukcja

9 Października 2024
NUVO

NUVO Dupont 60/1852 Instrukcja

9 Października 2024
NUVO

NUVO Surrey 60/4141 Instrukcja

9 Października 2024
NUVO

NUVO Dupont 60/1855 Instrukcja

9 Października 2024
NUVO

NUVO Dupont 60/1835 Instrukcja

9 Października 2024
NUVO

NUVO Dupont 60/1853 Instrukcja

9 Października 2024
NUVO

NUVO Polaris 60/611 Instrukcja

9 Października 2024
NUVO

NUVO Helium 60/4183 Instrukcja

9 Października 2024
NUVO

NUVO Dupont 60/1832 Instrukcja

9 Października 2024
NUVO

NUVO Bento 60/4083 Instrukcja

9 Października 2024

Instrukcje Verlichting

Najnowsze instrukcje dla Verlichting

Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 105.632.59 Instrukcja

9 Października 2024
Ikea

Ikea RÖKFRI 905.012.67 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 205.829.31 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 405.844.20 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 205.829.45 Instrukcja

9 Października 2024
Ikea

Ikea RÖKFRI 005.776.24 Instrukcja

9 Października 2024