Instrukcja obsługi Numark DM1050

Numark mikser DM1050

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Numark DM1050 (10 stron) w kategorii mikser. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
PROFESSIONAL DJ MIXER
Quick Start Owner’s Manual
Manual de inicio rápido para el usuario
(ESPAÑOL)
Schnellbedienungsanleitung (DEUTSCH)
Manuel d’utilisation du propriétaire
(FRANÇAIS)
Manuale rapido di utilizzazione (ITALIANO)
CONTENUTO DELLA CONFEZIONE
• MIXER
•
CAVI DI ALIMENTAZIONE
CONTENU DE LA BOÎTE
• MIXER
•
BLOC D’ALIMENTATION
SCHACHTELINHALT
• MISCHPULT
•
STROMKABEL
• MIXER
•
POWER SUPPLY
CONTENIDOS DE LA CAJA
• MEZCLADOR
•
FUENTE DE ALIMENTACIÓN
MIXER QUICK SETUP GUIDE (ENGLISH)
1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE
PRODUCT
3. Study this setup diagram.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders are at “zero”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to the power amplifier(s), tape decks, and/or
audio sources.
8. Plug your mixer and other devices into AC power.
9. Switch everything on in the following order.
• audio input sources (i.e. turntables or CD players)
• your mixer
• last, any amplifiers
10. When turning off, always reverse this operation by,
• turning off amplifiers
• your mixer
• last, any input devices
11. Go to http://www.numark.com for product registration.
FRONT PANEL FEATURES
1. Power LED: Illuminates when the mixer is
on.
2. Mic Gain: This knob adjusts the volume of
the microphone input.
3. Mic Treble: This knob adjusts the high-tone
of the microphone.
4. Mic Bass: This knob adjusts the low-tone of
the microphone.
5. Channel Gain: This rotary control adjusts
the pre-fader input level.
6. Channel Treble: This rotary control adjusts
the high-tone level.
7. Channel Middle: This rotary control adjusts
the middle-tone level.
8. Channel Bass: This rotary control adjusts
the low-tone level.
9. Input Selector: This toggles select what
input source is routed to the channel from
the rear panel connected units.
10. Channel Fader: This slide fader is used to
adjust the level sent to program mix.
11. Headphone Volume: This rotary control
adjusts the volume level of the headphone
output.
12. Headphone Jack: Your headphones can be
connected to this ¼” terminal. The volume
should always be set at its lowest setting
while connecting and disconnecting
headphones to prevent damage to
headphones and/or your hearing.
13. Cue Slider: Channels 1 and 2 can be
previewed using this mini-crossfader.
Sliding this to the left plays the left
“channel-1” and sliding to the right plays the
right “channel-2”.
14. Cue Meter: This meter shows the peak,
“PFL”, Pre Fader levels of channels 1 and 2.
You can use the channel “Gain” and “EQ”
controls to match the levels of input signals
while cueing.
15. Master Cue Selector: When selected only
the master output is heard in the
headphones.
16. Replaceable Crossfader: This slide fader
blends audio between the channels assigned
to the left and right assign switches.
Note: This fader is user replaceable if it
should ever wear out. Simply remove the
facepanel and then remove the screws
holding it in position. Replace the fader with
a quality authorized replacement from your
local Numark retailer.
17. Crossfader Direction: Activation of this
switch reverses the assignment of CH-1 and
CH-2 on the crossfader.
18. Crossfader Contour Control: The position
of this control determines how quickly or
intensely the crossfader will blend.
19. Master Output Knob: This rotary control
adjusts the main output volume.
20. Stereo Level Indicator: quickly and
accurately tracks level of audio.
REAR PANEL FEATURES
Note: It is recommended that the mixer be
turned off before connecting and
disconnecting any sources to the inputs of the
mixer.
1. Microphone Input: Microphones with a ¼”
connector can be connected to this input
terminal.
2. Phono Inputs: This input is used for
connecting your turntables through the sensitive
RIAA phono preamplifiers. Only turntables with
phono level output should be attached. Line
level turntables and other devices may be
attached if the Phono/Line rear panel switch is
set to the line position.
3. Phono/Line Source Switch: This switch
activates and deactivates the sensitive RIAA
phono preamplifiers. Only turntables with
phono level output should be assigned
when the switch is in the phono position.
Some turntables offer line level output. To use
these turntables and other line devices like CD
players, switch the input to Line.
4. GND: This screw connector should be used to
secure any turntables or other devices
connected to the mixer that need to be
grounded.
5. Line Inputs: CD players, Tape Decks, Samplers
or other line level input devices should be
connected to these inputs.
6. Record Output: This RCA output is for
connecting a recording device such as a tape
deck or CD recorder. The level of the record
output is based upon pre-master levels.
7. Master Output (RCA): This output is for
connecting an external monitoring device such
as a PA system, powered monitors or a home
stereo. The level of the master stereo output
signal is controlled by the master fader.
8. AC In: This mixer is designed to work with the
power supply assembly that comes with the
unit. While the power is switched off, plug the
power supply into the mixer first, then plug it
into the outlet.
9. Power Switch: Use this switch to turn on the
mixer after all input devices are already
connected to prevent damage to your
equipment. Turn the mixer on before you turn
on amplifiers and turn of amplifiers before you
turn off the mixer.

Specyfikacje produktu

Marka: Numark
Kategoria: mikser
Model: DM1050

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Numark DM1050, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikser Numark

Numark

Numark DM1050 Instrukcja

28 Maja 2024
Numark

Numark DM3000X Instrukcja

7 Maja 2024

Instrukcje mikser

Najnowsze instrukcje dla mikser

Wilfa

Wilfa 2Go XL TG1B-900 Instrukcja

15 Października 2024
Bosch

Bosch ErgoMixx MSM6S90B Instrukcja

14 Października 2024
Kenwood

Kenwood Blend-X Compact BLP302 Instrukcja

14 Października 2024
Bamix

Bamix Mono Instrukcja

11 Października 2024
Scarlett

Scarlett SC-HB42F80 Instrukcja

11 Października 2024
Wilfa

Wilfa Power Fuel XL PB1S-P2000 Instrukcja

10 Października 2024
Kenwood

Kenwood CL639 Instrukcja

10 Października 2024
Orbegozo

Orbegozo LI 5060 Instrukcja

10 Października 2024
Orbegozo

Orbegozo BV 9800 Instrukcja

9 Października 2024
Cecotec

Cecotec Power Black Titanium 1800MAX Wizard Instrukcja

9 Października 2024