Instrukcja obsługi Novation nio 2|4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Novation nio 2|4 (30 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/30
FA0163-01
INTRO
Welcome to the nio User Guide. This document should provide all the information you need to learn how to operate the
stylish USB interface. After detailing all of the controls and connections one by one, there are sections describing how
to record various sources, as well as defining output streams a and b and how to create monitor mixes. If you haven’t
already, you may want to also check out the printed Getting Started Guide in the box and the nio Tutorial movies on the
Novation website.
If you are having difficulty operating nio and cannot find the solution in this guide, go to the online answerbase at
www.novationmusic.com and type any relevant keywords into the search box.
WHAT’S IN THE BOX?
In the box with nio, you’ll find:
Printed Getting Started Guide to help you with the install process, plugging in and learning about basic operation
Resources disc contains the installer and full User Guide pdf
USB cable – use this to connect to the computer after installation is complete
Free software disc (e.g. Xcite+ pack) – contains any accompanying software and samples
GETTING STARTED
As outlined in the printed Getting Started Guide, the first stage of setting up nio is to run the installer. Separate PC
and Mac installers for nio can be found on the nio resources disc. Running the installer carries out the following actions:
Installs the Audio driver
Installs the MIDI driver
Installs the FX Rack software
PC SETUP
1. Close all running programs
2. With nio disconnected from your computer, locate the nio PC installer on the resources disc and double-click to run it
3. You may be asked to restart your computer to complete installation
4. Once the installer has finished, or once your computer has restarted, connect nio to your computer. A balloon will appear
whilst Windows installs the device:
XP Vista
5. Wait for the balloon to tell you ‘Device driver software successfully installed’ (Win Vista) or ‘Your new device is installed
and ready to use’ (Win XP)
2
MAC SETUP
1. Close all running applications
2. With nio disconnected from your computer, locate the nio Mac installer on the resources disc and double-click to run it
3. You may be asked to restart your computer to complete installation
4. Once the installer has finished, or once your computer has restarted, connect nio to your computer
Nio can now be used as an Audio and MIDI device with your computer. To apply the nio FX to the audio inputs, launch the
nio FX Rack software from the Start menu (Windows) or your Applications folder (Mac).
FRONT PANEL CONTROLS
1. Sets the level of Headphones 1
2. Chooses the signal sent to Outputs 1 and 2. This can be ‘a’
(nio outputs 1/2 from the sequencer) or ‘mon’ (the monitor mix
created in the ‘monitor’ section below - 12 16and )
3. Sets the level of Outputs 1 and 2 on the rear panel
4. Shows the level of Input 1 or Output 1 (dependent on the position
of the ‘meters’ switch below - 14)
5. Sets the gain (level) of Input 1
6. Sets the gain (level) of Input 2
7. Shows the level of Input 2 or Output 2 (dependent on the position
of the ‘meters’ switch below - 14)
8. Sets the level of Outputs 3 and 4 on the rear panel
9. Chooses the signal sent to Outputs 3 and 4. This can be ‘a’ (nio
outputs 1/2 from the sequencer), ‘b’ (nio outputs 3/4 from the
sequencer) or mon’ (the monitor mix created in the ‘monitor’
section below - 12 and 16)
10. Sets the level of Headphones 2
11. Indicates when nio’s Direct FX software is in use
12. Creates the blend of inputs and ‘playback’ (recorded) tracks for the monitor mix. In the extreme clockwise position,
only inputs are heard, whilst in the fully anticlockwise position, only the mix created by the a-b mix dial to the left is heard
13. Pans the inputs left and right respectively (stereo) or both centrally (mono) in the monitoring section (“mon” mix)
14. Selects the source shown by the LED meters above. Choices are Inputs 1/2 in the left position and Outputs 1/2 in
the right position
15. Selects the signal sent to the 2 pairs of headphones. Choices are ‘a’ (nio outputs 1/2 from the sequencer), ‘b’
(nio outputs 3/4 from the sequencer) or ‘mon’ (the monitor mix created in the ‘monitor’ section above - 12 and 16)
16. Creates a blend between ‘a’ (nio outputs 1/2 from the sequencer) and ‘b’ (nio outputs 3/4 from the sequencer).
This becomes the a-b ‘mix’ of playback tracks that can be blended with the inputs using the dial to the right to create
the monitor mix
3


Specyfikacje produktu

Marka: Novation
Kategoria: Niesklasyfikowane
Model: nio 2|4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Novation nio 2|4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Novation

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024