Instrukcja obsługi Novation Bass Station Rack

Novation Niesklasyfikowane Bass Station Rack

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Novation Bass Station Rack (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
OWNERS MANUAL
1
Introduction...................................................................................1
Front Panel Controls & Features..................................................2
Rear Panel Features ....................................................................2
Connections & Quick Set-up Guide..............................................3
How The Controls Work ...............................................................4
Master Volume Section.................................................................4
Data Entry / Program Section.......................................................4
Program Change ..........................................................................5
MIDI TX, RX Channels .................................................................5
Utilities ..........................................................................................5
Save & Load (Sysex Dumps) .......................................................9
Editing & Writing Sounds..............................................................10
Analogue Voice Architecture ........................................................11
LFO Section..................................................................................12
Oscillators l&2 Section..................................................................13
Oscillators 1&2 Mod/Sync. Section ..............................................14
Filter Section.................................................................................15
Envelopes 1&2 Section ................................................................16
MIDI Control .................................................................................18
Filter / Envelope Controllers .........................................................18
LFO to MIDI Clock Sync...............................................................18
CV! Gate to MIDI Convertor .........................................................18
Appendix.......................................................................................19
Roland TB303 Emulation & Troubleshooting Guide.....................19
Specication .................................................................................20
Midi Implementation Chart............................................................21
Factory Programs List ..................................................................22
CONTENTS INTRODUCTION
Thank you for buying the Novation BassStation Rack Analogue Bass Synthesizer.
The module you have purchased is ideal for producing the kind of bass sounds
which have returned to popularity in recent years, hut it is capable of far more
than just that. Analogue synthesis is also suitable for melody lines and lead solos
as well as sound eects.
The MIDI specication on the BassStation Rack allows for real-time transmission
and reception of controller information. This means that the live ‘tweaking’ of con-
trols during a performance, which is particularly appropriate for analogue sounds,
can be recorded into a sequencer along with the notes played and the entire per-
formance recreated on playback. Bulk or individual dumps of the 100 Memory
locations can also be sent and received, allowing you to build a large library of
analogue sounds for dierent applications.
The BassStation Rack also adds several features over and above the specica-
tion of the successful BassStation keyboard. The Oscillator Sync. feature is very
popular with traditional synthesists allowing very vocal timbres. The CVIGate -
MIDI converter can be used to trigger the Rack froni a vintage analogue
synth/sequencer or as a translator for a MIDI sequencer to trigger other analogue
devices. The external input to the Rack’s lter means that you can process any
other instrument - including an analogue synth being triggered by the CV/Gate -
MIDI converter
Welcome to an expanded "Analogue for the 90’s".
2
1 Master Volume Section
This section contains the Master Volume and Portamento controls, Headphone output
socket and the Program write enable switch.
2 Data Entry I Program Section
This section contains the 12 Data Entry buttons, Display and Menu LEDs,
Audition/Demo and Mode Buttons.
3 LFO Section
This section contains the LEO Speed, Depth and Waveform Shape controls.
4 Oscillator 1- 2 Sections
This section contains the Oscillator 1 Waveform, Oscillator 2 Waveform, Range,
Detune and Semi-tone transposition controls. It also contains the control to mix
Oscillators 1 & 2 with the external audio input.
5 Oscillator 1 & 2 Mod/Sync Section
This section contains the Oscillator 1-2 Sync, Oscillator Mod select, PWM Source,
Envelope Modulation, LEO Modulation and Pulse Width Depth controls.
6 Filter Section
This section contains the Frequency, Resonance, Modulation Depth, Cut-o slope and
Modulation Source controls.
7 Envelope Section
This section contains the Envelope select, Triggering, Attack, Decay, Sustain, Release
and Velocity controls.
FRONT PANEL
1 CV / Gate ln & Out
The connectors in this section are used to interface vintage analogue synthesisers
with CV / Gate in/outs to MIDI.
2 Filter Input
This connector is used to process an external MIDI triggered sound source through
the lter and envelope sections of the BassStation Rack.
3 Output
This 1/4 jack delivers a line-level output signal for connection to a mixing desk or
amplier input.
4 MIDI
IN - This connector is used to receive MIDI data from an external device
OUT - This connector is used to transmit MIDI data to an external device.
THRU - This connector re-transmits MIDI data received by the MIDI IN socket to an
external device.
5 9vDC Input
Connect the output plug of the AC adapter supplied with the BassStation Rack to this
socket.
REAR PANEL

Specyfikacje produktu

Marka: Novation
Kategoria: Niesklasyfikowane
Model: Bass Station Rack

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Novation Bass Station Rack, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Novation

Novation

Novation Launchkey MMini 25 K4 Instrukcja

8 Października 2024
Novation

Novation mm10-X Instrukcja

30 Września 2024
Novation

Novation Xio 49 Instrukcja

23 Września 2024
Novation

Novation FLkey Mini Instrukcja

22 Września 2024
Novation

Novation Launchpad Instrukcja

21 Września 2024
Novation

Novation A-Station Instrukcja

17 Września 2024
Novation

Novation nio 2|4 Instrukcja

16 Września 2024
Novation

Novation Supernova II Rack Instrukcja

15 Września 2024
Novation

Novation Launchkey 25 MK1 Instrukcja

15 Września 2024
Novation

Novation Bass Station Keyboard Instrukcja

15 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024