Instrukcja obsługi Nortel T7208

Nortel Telefony bezprzewodowe DECT T7208

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nortel T7208 (2 stron) w kategorii Telefony bezprzewodowe DECT. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Your T7208 telephone
© Mute button
Turns the microphone off or on when you are on a call.
¬ Headset button
Turns the headset mode on.
≤ Feature button
Starts or ends a feature.
≥ Hold button
Places calls on hold.
Memory and line buttons
Ω Indicators
Appear next to active line and memory buttons.
Number card
Write your extension number on this card.
F
G
H
I
J
K
L
T7208 Telephone User Card
1-800-4 NORTEL
www.nortelnetworks.com
© 2000 Nortel Networks
P0913984 03
Printed in Canada
A
C
D
E
FG
H
I
J
K
B
L
Cord connections
Wall mount without a telephone stand
1
2
Headset option
Connect cord to
headset.
Connect cord
to handset.
Insert line cord.
Connect line cord to wall jack.
Desk mount option
Route line cord
Press here to remove the stand.
Mount stand on
telephone.
through the stand
as shown. Place
line cord
line cord into the
slot on the stand.
Press here to remove the stand.
Place the telephone onto the
wall mount plate and slide
it down.
Connect line cord to
wall jack.
1
2
Connect cords to the telephone,
refer to “Cord connections”
illustrations.
Your T7208 telephone
Telephone light
Flashes when a call rings at the telephone.
Adjustable display
Shows the time and date, call and feature information.
Adjust the display to your personal preference.
® Release button
Ends an active call.
Dial pad
√ Volume control
Adjusts the handset, Handsfree, headset and ringer
volume.
A
B
C
D
E
Wall mount with a telephone stand
Mount the telephone
onto the screws and
slide it down.
1
Mount the stand as shown and
insert screw. Use the screw that
came with your telephone.
Use the key hole slots on the stand
to mark the location for the screws.
key hole slots
2
Connect line cord to
wall jack.
Connect cords to the telephone,
refer to “Cord connections”
illustrations.
Press here to remove the stand.
Tighten screws for a secure fit.
3
Display contrast level
Adjust the contrast of your display.
1. Press ≤•‡.
2. Press ⁄ to · to select a contrast level. The higher
the number the higher the contrast level.
Language choice
≤•fi‚⁄
Select Primary Language for the telephone display.
≤•fi‚¤
Select Alternate Language for the telephone display.
≤•fi‚‹
Select Alternate Language 2 for the telephone display.
≤•fi‚›
Select Alternate Language 3 for the telephone display.
Ring type
Select a different ring for your telephone.
1. Press ≤•fl.
2. Press ⁄¤‹› to hear the different ring types.
3. Press ≤to store the ring type.
Telephone setup
TelephoneMagic.com
Check what is programmed on your buttons.
1. Press ≤•‚.
2. Press the button(s) that you want to check.
3. Read the display. Button assignment examples are
shown below.
4. Press ≤ when finished.
Use the button label strip on the telephone to show what is
programmed on the buttons. Spare button label strips are
provided with your telephone.
How to label your buttons
1. Remove the plastic lens and button label strip from the
telephone.
2. Write the name of each button on the button label strip.
3. Insert the button label strip back on the telephone.
4. Insert plastic lens, matching the tabs on the lens with
the notches on the telephone.
Tip
Use the Desktop Assistant application to customize
button label strips for your telephone.
Go to www.nortelnetworks.com/sbs_desktopassistant and
download the Desktop Assistant application to your
personal computer.
Button inquiry
Line Intercom
Internal autodial External autodial
Feature Handsfree
Button labels
Align tabs
Memory buttons are buttons with Ωindicators not
assigned as line, intercom or Handsfree buttons.
Memory buttons store internal and external numbers or
features to give you one touch dialing or feature activation.
You can program a memory button with a new number or
feature.
External autodial
1. Press ≤•⁄.
2. Press a memory button.
3. Dial the external number.
4. Press ≥ to store the number.
5. Label your new button.
Internal autodial
1. Press ≤•¤.
2. Press a memory button.
3. Dial the extension number.
4. Label your new button.
Features
1. Press ≤ • ‹.
2. Press a memory button.
3. Press ≤and enter the feature code.
4. Label your new button.
How to erase memory buttons
1. Press ≤•⁄.
2. Press a memory button.
3. Press ≥ to erase the button.
Memory buttons
Programming memory buttons
Making calls
There are many ways to make a call, depending on your
telephone programming and the type of call.
External calls using line buttons
1. Lift the handset.
2. Press a line button.
3. Dial the external telephone number.
External calls using intercom buttons
1. Lift the handset.
2. Press an intercom button and enter a line pool access
code.
3. When you hear an external dial tone, dial the external
telephone number.
Contact your System Administrator or Coordinator for a list
of line pool codes.
Internal calls using intercom buttons
1. Lift the handset.
2. Press an intercom button.
3. Dial the extension number.
Contact your System Administrator or Coordinator for a list
of extension numbers.
Answering calls
When your telephone rings and the display light flashes or
when an intercom or line button Ωindicator flashes:
• Lift the handset.
OR
Press the button with the flashing Ωindicator before
you lift the handset.
How to hold calls
• While on a call, press ≥. The Ωindicator for the line
on hold will flash.
• To retrieve a held call, press the line button with the
flashing Ωindicator.
• Calls are put on hold automatically when you switch
from one line to another.
Making and answering calls
Handsfree calls
Your System Administrator or Coordinator must program
the Handsfree feature on your telephone.
• Press the Handsfree button on your telephone to
make or answer a call.
• To switch to Handsfree when you are on a call, press
the Handsfree button and replace the handset. Lift
the handset to switch back.
When programmed, the Handsfree feature is assigned to
button 8 on your telephone.
How to mute calls
• While on a call, press © to turn the microphone off.
The © light flashes when the microphone is off.
• Press © again to turn the microphone on.
•Use © on handset, Handsfree or headset calls.
Headset calls
• Press ¬ to activate the headset mode. When the
¬ light is on, press a line or intercom button to
make a call.
• Press ¬ to answer a call when the telephone rings
or when an intercom or line button Ωindicator
flashes.
• To switch to your headset when you are on a call,
press ¬ and replace the handset. Lift the handset
to switch back.
Warning
Nortel Networks does not support the connection of a
headset to the T7208 telephone, unless Handsfree is
enabled within the system programming. If Handsfree is
not enabled, certain call handling features may not work
as intended.
More on making and answering calls
8
Handsfree button

Specyfikacje produktu

Marka: Nortel
Kategoria: Telefony bezprzewodowe DECT
Model: T7208

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nortel T7208, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telefony bezprzewodowe DECT Nortel

Nortel

Nortel WLAN Handset 2211 Instrukcja

26 Września 2024
Nortel

Nortel IP Phone 8540 Instrukcja

20 Września 2024
Nortel

Nortel T7208 Instrukcja

18 Września 2024
Nortel

Nortel 4145 Instrukcja

18 Września 2024
Nortel

Nortel i2001 Instrukcja

15 Września 2024
Nortel

Nortel IP Phone 1220 Instrukcja

5 Września 2024
Nortel

Nortel T7316E Instrukcja

2 Września 2024

Instrukcje Telefony bezprzewodowe DECT

Najnowsze instrukcje dla Telefony bezprzewodowe DECT

Tiptel

Tiptel 205 PLUS Instrukcja

5 Października 2024
KPN

KPN Atlanta 100 HS+BS Instrukcja

5 Października 2024
Motorola

Motorola CD4012 Instrukcja

5 Października 2024
IDECT

IDECT X2i Instrukcja

28 Września 2024
IDECT

IDECT X3i Instrukcja

28 Września 2024
ITT

ITT DP 27 Instrukcja

28 Września 2024
ITT

ITT DP29 Instrukcja

28 Września 2024
Orchid

Orchid LR4620T Instrukcja

28 Września 2024
Sweex

Sweex IP004 Instrukcja

28 Września 2024
Mitel

Mitel 5224 Instrukcja

27 Września 2024