Instrukcja obsługi Nokia MD-50W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nokia MD-50W (8 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Nokia Play 360° Wireless Speaker MD-50W
Issue 1.1
About your speaker
With the Nokia Play 360° wireless speaker, you can listen to music from your compatible
device, such as a phone or music player, and enjoy high-quality audio. A single speaker
fills your room with music, and you can connect a second Nokia Play 360° wireless
speaker for stereo sound. You can connect to another device on the go, without stopping
the music playing. The speaker also has a standard 3.5 mm audio connector.
Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.
Warning:
This product may contain small parts. Keep them out of the reach of small children.
The surface of this product is nickel-free.
About Bluetooth
You can use Bluetooth to wirelessly connect devices and accessories to other compatible
devices, such as phones.
Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33
feet) of each other. The connection may be affected by obstructions such as walls or
other electronic devices.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following
profiles: A2DP, AVRCP. Check with the manufacturers of other devices to determine their
compatibility with this device.
Get started
Keys and parts
1 NFC area
2
2 Volume keys
3 Bluetooth status indicator
4 Bluetooth key
5 Battery status indicator
6 Charger connector
7 Power key
8 Battery cover fixing screw
9 3.5 mm audio input connector
Charge the battery
Before using the speaker, you must charge the battery.
When the battery level of the speaker is low, the battery indicator light flashes. When
the battery is charging, the light stays on. After the battery has fully charged, the light
switches off.
1 Connect the charger to a wall outlet.
2 Connect the charger cable to the charger connector on the speaker.
3 When the battery is fully charged, first disconnect the charger from the speaker,
then from the wall outlet.
You can also use a compatible USB cable to charge the battery. Charging over USB can
take longer to start and you may not be able to use the speaker immediately. Charging
may not work if you connect through a non-powered USB hub. Your speaker charges
more quickly when connected to a wall outlet.
You can only use the USB connection to charge the battery.
Your speaker has an internal, removable battery. To remove the battery, unscrew the
battery cover, and gently remove the cover and the battery.
Switch the speaker on
Press and hold the power key.
If you have never paired the speaker with a device, or you have cleared the pairings,
pairing mode is activated automatically, and the Bluetooth status indicator starts to
flash slowly.
If you already have paired the speaker with one or more devices, the speaker connects
to the last device it was used with. If the speaker can't connect to the last used device,
it connects to the next device on the paired devices list.
3

Specyfikacje produktu

Marka: Nokia
Kategoria: Kołyska/stacja dokująca
Model: MD-50W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nokia MD-50W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kołyska/stacja dokująca Nokia

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024