Instrukcja obsługi Noise Engineering Sinc Defero


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Noise Engineering Sinc Defero (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Overview
Yep, it’s an attenuator. With a fancy name! And LEDs!
1
Noise Engineering
Sinc Defero
Buffered quad attenuator with LED indication
Type
Attenuator
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
70 mA
-12 mA
30 mA
Etymology
Sinc -- from Old English sinc: treasure and greek clastic: easily
removable
Defero -- from Latin: to slope down
“Portable treasure reduction”
Sinc Defero is rated to work with voltages from -10v to +10 v.
Input & output voltages
Patch Tutorial
2
Interface
In 1-4: CV Inputs. Inputs are circularly normaled so a single input can be sent to all
outputs or as few as you like.
Out 1-4: Buffered outputs.
Attenuators 1-4: Attenuators for each channel. Fully CCW mutes a signal. Indicator
LEDs show the incoming and outgoing signals, with green for positive voltage and
red for negative.
Design Notes
SD was one of a suite of really simple utility modules we came up with during a day
of planning. While we were really trying to work on some bigger things that we
wanted in our line---like filters and effects---we just kept having ideas that we
thought would be just so helpful if we had them with the things we were talking
about. By the end of the day, we had designs for three simple products that we’d
never discussed before and had prototypes ordered by the end of the week.
This module was meant to fill the hole we saw in the market for a buffered
attenuator. While passive attenuators abound (and we use the heck out them), the
drop in voltage they sometimes cause can be problematic, and we wanted something
that would be active and give some visual feedback. Plus, it wouldn’t be NE if it
didn’t have blinkenlights!
Patch a single CV signal into input #1. Patch the corresponding output to an input
on an oscillator, for example, the Basimilus Iteritas Alter. Turn the attenuator to turn
the CV level up and down.
Add patch cables to other outputs and send them to other inputs on BIA. The single
input is sent to all outputs.
Add a second signal to input 3. The signal on input 3 is now sent out of outputs 3
and 4.


Specyfikacje produktu

Marka: Noise Engineering
Kategoria: Nie skategoryzowane
Model: Sinc Defero

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Noise Engineering Sinc Defero, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Noise Engineering

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane