Instrukcja obsługi Noise Engineering Sinc Bucina

Noise Engineering Niesklasyfikowane Sinc Bucina

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Noise Engineering Sinc Bucina (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Overview
Sinc Bucina is the sequel to one of our first modules, Sinclastic Empulatrix, replacing the
clamping VCA with a resonant low-pass VCF and VCA combo. The velocity-dependent Ping
input offers classic release-only LPG behavior, while the Gate in offers much more complex
slewing, useful for simple ASR envelopes to dynamic modulation. The Envelope Out allows the
internal envelope to be routed out into a patch for even more versatility and modulation fun.
1
Noise Engineering
Sinc Bucina
Resonant low-pass gate with variable filter
slope, RC envelope generator, and slew
Type
VCFA, envelope generator, slew
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12
45 mA
-12
40 mA
Etymology
“Easily Removable War Trumpet”
Sinc -- shortened from Sinclastic from Old English sinc ‘treasure', from greek clastic 'easily
removable'
Bucina -- from Latin: “War Trumpet”
Ping will trigger starting at 2v and will fully open the VCFA at 5v.
The envelope output is 0-6v, depending on Ping/Gate input.
Gate in will respond to voltages up to 10v.
Input & output voltages
Patch Tutorial
Patch 3: Run a trigger into an attenuator (like Sinc Defero) or a VCA and then
into the Ping input of SB. Patch an oscillator to the Audio In and the Audio Out to
your mixer. Adjust the attenuator or open and close the VCA to hear the different
dynamics SB can impart onto a waveform. A static attenuated trigger can be
useful to shape the character of SB.
Patch 1: Send a simple oscillator signal to the Audio In. Patch the Audio Out to
your mixer. Send a trigger to the Ping input and play with the Release time to
create plucky, percussive sounds. Also try sending a more complex oscillator (like
the Loquelic Iteritas or Ataraxic Iteritas) for classic “west coast” tones (and
beyond)!
Patch 2: Send an audio signal to the Audio In and patch the Audio Out to your
mixer. Send a stepped voltage sequence to the Gate In and adjust the Attack and
Release times to increase or decrease slewing between steps and create a
dynamic, harmonically rich sequence.
2
Interface
Out: Envelope out.
Hit: Momentary button that sends a gate to the Gate In for as long as the button
is pressed.
Attack: Sets the rise time for the slew. The Attack stage is bypassed if a trigger is
sent to the Ping input.
Gate: Slew input. Also voltage dependent: a lower voltage will open the VCA and
VCF less than a higher voltage. Send a gate to this input for ASR envelope
behavior, or send more complex signals in to be slewed, with rise rate set by
Attack and fall rate set by Release. 0-5v.
6/0/12: Sets the LPG’s behavior: resonant 6dB-slope low-pass filter, no filter (just
VCA), or 12 dB-slope low-pass filter.
Audio In: Audio into the VCF/VCA.
Audio Out: Audio out from the VCF/VCA.
Ping: Amplitude-dependent trigger input. Sending a trigger to this input bypasses
the Attack stage. Release time is set by the Release knob. Ping input is voltage
dependent: a lower voltage trigger will open the VCA and VCF less than a higher
voltage trigger, which allows for expressive and dynamic sequencing. 0-5v; +5v
opens the VCA/VCF completely.
Release: Sets the fall time for the slew.
3
Special Thanks
Don Buchla
Design Notes
The first design of Sinc Bucina was created soon after Don Buchla’s death. Though
electronically SB is a distant cousin of the original low-pass gates, it very much draws inspiration
from Buchla’s pioneering early synthesizer work. This is technically our first analog filter. Sinc
Bucina is a simple two pole low-pass filter with a following VCA. All sections are implemented
with the SSI2164 VCA. We chose not to use vactrols for practical and environmental reasons,
but the envelope generator is a very simple DRC network with a little complexity to give a touch
of the vactrol temporal-nonlineary behavior.

Specyfikacje produktu

Marka: Noise Engineering
Kategoria: Niesklasyfikowane
Model: Sinc Bucina

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Noise Engineering Sinc Bucina, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Noise Engineering

Noise Engineering

Noise Engineering Mimetic Digitalis Instrukcja

29 Września 2024
Noise Engineering

Noise Engineering Sinc Bucina Instrukcja

24 Września 2024
Noise Engineering

Noise Engineering Quantus Pax Instrukcja

5 Lipca 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024