Instrukcja obsługi Nitecore UM20

Nitecore Ładowarka baterii UM20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore UM20 (1 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
Features
• USB powered Li-ion battery charger
• High definition LCD displays real time charging status
• Features USB output charging
• Integrated intelligent power management system
• Intelligently detects input power
• Intelligently distributes charging power
• Priority Mode offers either battery or USB charging
• Enables data transfer via USB
• Intelligently selects charging current based on battery capacity
• Features rear USB cable winder and grooves to accommodate 2.5mm/3.0mm USB cables
• Constructed from fire retardant materials
• Features reverse polarity protection
• Designed for optimal heat dissipation
• Certified by RoHS, CE, FCC and CEC
• Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
Specifications
Input voltage: Micro USB DC 5V
Output voltage: 4.2V ±1% / 5V
Output current: 1000mA / 500mA
Input current: ≥500mA
Compatible with:
Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
Dimensions: 3.94”×2.20”×1.38” (100mm× 56mm×35mm)
Weight: 2.72oz (77.2 gram)(without batteries or power cord)
Standard Function
1.Connecting: Unwind the USB cable, lift the rear panel and draw out the cable as instructed. Plug one
end of the included USB cable to the UM20’s input port and the other end to a power supply (adapter,
PC or other standard USB output port). Upon powering up, the UM20’s LCD will display the power
level indicator (hollow) and battery percentage (0%).
2.Inserting Batteries: Insert batteries as instructed. Incorrectly inserted batteries will prevent the UM20
from functioning.
3.Battery Test: After battery installation, the UM20 will run a quick battery test before charging. If a
problem is detected (for example the batteries are installed backwards), the UM20 will stop charging
and display “EE” on the LCD to notify the user.
4.Charging: During the charging process, charging current will adjust automatically based on the
detected battery type, power level and internal battery resistance. For example, when charging
batteries of smaller capacities such as 14500 and 16340, charging current will automatically be set to
500mA, ensuring safe use and preserving battery longevity.
5.Charging Progress: The UM20 will indicate battery status and charging progress. When batteries are
fully charged, 5 power level indicator bars and “100%” will illuminate steadily on the LCD display.
Priority Mode
1. When there is a power deficit for the UM20 to charge both batteries and USB device simultaneously,
the UM20 will prioritize the charging of the batteries or the device following the user’s preference.
When the top switch is set to BATTERY, battery priority mode will be activated. In this mode, the
UM20 will charge the batteries first. When batteries are fully charged or removed, the UM20 will then
charge / power the USB device automatically.
2. When the top switch is set to USB, USB priority mode will be activated. In this mode, the UM20 will
charge / power the USB device first. When the USB device is fully charged or disconnected, the
UM20 will charge the batteries automatically.
3. When charging 2 batteries simultaneously, output has to be at least 1000mA or above, when output
drops below 1000mA, the charger will charge 1 battery at a time.
NOTE: A small electrical current will keep passing through to the external device connected to maintain
the device in its full power state when it is charged.
Battery Activation
The UM20 is capable of activating over discharged protected Li-ion batteries. After battery installation,
the UM20 will test and activate the batteries before charging. Batteries detected as damaged cannot be
activated by the UM20 and “EE” will be displayed on the LCD to indicate an error.
NOTE: Nitecore does not recommend charging zero volt (0V) (over discharged) unprotected Li-ion
batteries with the UM20 and doing so can result in battery leakage fire, or explosion.
Precautions
1. Nitecore recommends using only quality USB adapters with the UM20. Using poor quality adaptors
may result in the LCD displaying “EE” to indicate an error.
2. The charger is restricted to charging Li-ion, IMR rechargeable batteries only. Never use the charger
with other types of batteries as this could result in battery explosion, cracking or leaking, causing
property damage and/or personal injury.
3. The safe operation temperature for the charger is between -10 to 40°C, and the safe storage
temperature is -20 to 60°C.
4. Do not use the charger to charge other unspecified batteries as they may leak or burst, causing
personal injury and damage.
5. Observe polarity diagrams located on the charger. Always place the battery cells with positive tip
facing the top.
6. Never leave the charger unattended when it is connected to power. If any malfunction is found,
terminate the process at once and refer to the operation manual.
7. The charger is for use of adults above 18 years old. Children under this age must be supervised by
an adult when using the charger.
8. Please make sure the correct program and settings are chosen and set. Incorrect program or setting
may damage the charger or cause fire or explosion.
9. Never attempt to charge primary cells such as Alkaline, Zinc-Carbon, Lithium, CR123A, CR2, or any
other unsupported chemistry due to risk of explosion and fire.
10. Do not charge a damaged IMR battery as doing so may lead to charger short-circuit or even
explosion.
11. Never charge or discharge any battery having evidence of leakage, expansion/swelling, damaged
outer wrapper or case, color-change or distortion.
12. Do not expose the device to direct sunlight, heating devices, open flames; avoid extreme high or
extreme low ambient temperatures and sudden temperature changes.
13. Please operate the charger in a well-ventilated area. Do not operate or store it in damp area. Keep
all the inflammable volatile substances away from operating area.
14. Avoid mechanical vibration or shock as these may cause damage to the device.
15. Do not short-circuit slots or other parts of the device. Do not allow metal wires or other conductive
material into the charger.
16. Do not touch hot surfaces. The rechargeable batteries or the device may become hot at full load or
high power charging/discharging.
17. Do not overcharge or over discharge batteries. Recharge drained batteries as soon as possible.
18. Remove all batteries and unplug the charging unit from the power source when not in use.
19. Opening, disassembling, modifying, tampering with the unit may invalidate its guarantee, check
warranty terms.
20. Do not misuse in any way. Use for intended purpose and function only.
Disclaimer
This product is globally insured by Ping An Insurance (Group) Company of China, Ltd. Nitecore shall
not be held responsible or liable for any loss, damage or claim of any kind incurred as a result of the
failure to obey the instructions provided in this user manual.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem covered
under warranty occurs, customers can contact their dealers or distributors in regards to their warranty
claims, as long as the product was purchased from an authorized dealer or distributor. NITECORE’s
Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE
products.
Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within
the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE® products can be repaired
free of charge for a period of 12 months (1 year) from the date of purchase.
Beyond 12 months (1 year), a limited warranty applies, covering the cost of labor and maintenance, but not
the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are
1. broken down, reconstructed and/or modified by unauthorized parties
2. damaged from wrong operations (i.e. reverse polarity installation, installation of non-rechargeable
batteries), or
3. damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE®
distributor or send an email to service@nitecore.com.
※All images, text and statements specified herein this user manual are for reference purpose only. Should
any discrepancy occurs between this manual and information specified on www.nitecore.com, information on
our official website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
Validation code and QR code on package can be verified on Nitecore website.
User Manual
UM20
USB Management and Charging System
Advanced Functions
USB Output Charging
1. As illustrated, lift the rear panel and plug an USB cable to the
charging port underneath.
2. Connect the other terminal of the USB cable with an external
device that needs to be powered / recharged. will start （ ）
flashing on the LCD to indicate the UM20 is connected with a
USB cable. After the device is fully charged, the（ ） icon
stops flashing and remains on constantly.
®
The New Benchmark in Intelligent Chargers
20161010
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Manufacturer: SYSMAX Power Technology, LLC
Address： B4 Happy Factory, 81 East Huahong Commercial Street,
North Zhenxing Road, Gaobu, Dongguan, China
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this charger, please find your verification code on the package box, and go to
http://charger.nitecore.com/validation (or scan the QR code beside the verification code to visit on your mobile phone). Type in your
verification code and personal information as required, and submit the page. After verification, Nitecore will send you a warranty service
email. This email and your registration email address are essential to your possible warranty application. Before you complete the
warranty service registration, you cannot enjoy our warranty service for your purchase.
Thanks for purchasing NITECORE!

Specyfikacje produktu

Marka: Nitecore
Kategoria: Ładowarka baterii
Model: UM20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nitecore UM20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Nitecore

Nitecore

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025
Nitecore

Nitecore Intellicharger i2 Instrukcja

29 Grudnia 2024
Nitecore

Nitecore FSP30 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NES2000 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore FSP100 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NC10000 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NES500 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NPS400 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NPB1 Instrukcja

16 Grudnia 2024
Nitecore

Nitecore NPB2 Instrukcja

16 Grudnia 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025
Graupner

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025
Fuxtec

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025
Voltcraft

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025
Envivo

Envivo ENV-1597 Instrukcja

11 Stycznia 2025
Xblitz

Xblitz XC1 Instrukcja

10 Stycznia 2025
Jackery

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025
Jackery

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger QLS10S 513 Instrukcja

7 Stycznia 2025