Instrukcja obsługi Nitecore UM2

Nitecore Ładowarka baterii UM2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore UM2 (23 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/23
UM2
• Automatic and High-Speed Charging
• Real-time Information Display
• Over-Discharged Li-ion Battery Activation
and IMR Battery Restoration
Intelligent USB
Dual-Slot Charger
Features
Contents
English
···········································
2
Español
··········································
6
Deutsch
·········································
10
Francais
·········································
14
Русский
·········································
18
 日本語
·············································
22
 한국어
·············································
26
Italiano
···········································
30
Română
·········································
34
 简体中文
··········································
38
IMPORTANT NOTICE CONCERNING WARRANTY
SERVICE
Thank you for purchasing! Before using this charger, please nd your
verication code on the package box, and go to http://charger.nitecore.
com/validation (or scan the QR code beside the verification code to
visit on your mobile phone). Type in your verication code and personal
information as required, and submit the page. After verification,
Nitecore will send you a warranty service email. This email and your
registration email address are essential to your possible warranty
application. Before you complete the warranty service registration, you
cannot enjoy our warranty service for your purchase.
-2-
(English) UM2 User Manual
Operating Instructions
Connect to power source: connect the UM2 to an external power source (a USB adapter, a computer or other USB
charging devices) via the USB charging cable.
Insert batteries: The UM2 features 2 independently controlled charging slots. Insert batteries of supported types
into each slot according to the polarity marks on the slot. After battery installation, the UM2 begins charging and
presents Charging Current, Battery Voltage, Charged Volume and Charging Time on the LCD screen.
Battery Inspection and Error Report: The UM2 has reverse polarity protection and anti-short circuit function. If
there are batteries inserted with polar reversed or short-circuited, the LCD screen of relevant slot will indicate “EE EE”
and the power level display will ash to notify the user of an error.
Smart charging: The UM2 can choose appropriate charging currents based on intelligent detection about battery
types and capacities. Manual charging current selection is also available. The UM2 is compatible with:
1) 3.6V/3.7V Li-ion rechargeable batteries
2) 3.8V Li-ion rechargeable batteries (4.35V±1% when fully charged)
3) 1.2V Ni-MH/Ni-Cd rechargeable batteries
4) 3.2V LiFePO4 batteries
Default Settings
The default settings (not manually congured) for the UM2 are:
Battery Type and Capacity
Standard Mode QC Mode
Default Charging
Current
Selectable Range of
Charging Current
Default Charging
Current
Selectable Range of
Charging Current
Li-ion batteries
(4.2V±1% when
fully charged)
>1,200 mAh 500mA 100mA-1,000mA 1,000mA 100mA-1,500mA
<1,200 mAh 500mA 100mA-1,000mA 500mA 100mA-1,000mA
Ni-MH/Ni-Cd
batteries (1.48V±1%
when fully charged)
AA/AAA 500mA 100mA-1,000mA 500mA 100mA-1,000mA
C/D 500mA 100mA-1,000mA 500mA 100mA-1,000mA
Note: The UM2 can automatically select charging modes for Ni-MH/Ni-Cd batteries and 3.7V Li-ion batteries. LiFePO4
batteries and 3.8V Li-ion batteries require manual settings on charging cut-o voltages. For the battery whose length
is >60mm (2.4”), the UM2 automatically identies its capacity as >1,200mAh.
Button Operations
During the charging process:
Short press the C button to cycle through the charging status of the 2 slots.
Short press the V button to cycle through Charging Current, Battery Voltage, Charged Volume and Charging time on
the LCD screen.
Long press the C button to enter the Charging Setting Mode.
Long press the V button to enter Restoration Mode. (Only eective to over-discharged IMR batteries)
After entering the Charging Setting Mode:
Short press the C button to switch to dierent setting parameters (Charging Current and Cut-O Voltage).
Short press the V button to increase with a 100mA increment each time when setting the Charging Current; or to
switch to dierent battery types and voltage readings when setting the Cut-O Voltage.
Long press the V button to directly access the maximum setting when setting the Charging Current.
Long press the C button to save and exit the Charging Setting Mode.
Note: Perform no action in 10 seconds to exit the Charging Setting Mode without saving and return to the previous
settings.
Charging Voltage Settings
The UM2 is compatible with 3.6V/3.7V Li-ion and Ni-MH/Ni-Cd batteries with automatic detection and adoption of the
suitable charging voltage. For LiFePO4 batteries and 3.8V Li-ion batteries, please follow the steps below for charging
voltage settings:
1. After the battery is inserted and the charging process begins, short press the C button to select the correct slot
and long press the C button to enter Charging Setting Mode.
2. After entering Charging Setting Mode, short press the C button. When the screen shows the ashing text “CHG.
MODE”, short press the V button to select the correct charging voltage (3.7V/4.2V/4.3V).
3. For LiFePO4 batteries, the voltage needs to be set to 3.7V. For 3.8V Li-ion batteries, the voltage needs to be set to
4.3V.
4. When the setting is nalized, long press the C button to save and exit the Charging Setting Mode.

Specyfikacje produktu

Marka: Nitecore
Kategoria: Ładowarka baterii
Model: UM2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nitecore UM2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Nitecore

Nitecore

Nitecore NB20000 Gen3 Instrukcja

8 Października 2024
Nitecore

Nitecore NB10000 Gen3 Instrukcja

7 Października 2024
Nitecore

Nitecore izzCool 10 Pro Instrukcja

7 Października 2024
Nitecore

Nitecore NW5000 Instrukcja

30 Września 2024
Nitecore

Nitecore EMR30 SE Instrukcja

26 Września 2024
Nitecore

Nitecore EMR40 Instrukcja

24 Września 2024
Nitecore

Nitecore UCN2 PRO Instrukcja

17 Września 2024
Nitecore

Nitecore UCN1 Instrukcja

17 Września 2024
Nitecore

Nitecore NEF20 Instrukcja

17 Września 2024
Nitecore

Nitecore LC10 Instrukcja

16 Września 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

MSW

MSW S-CHARGER-20A.2 Instrukcja

15 Października 2024
MSW

MSW S-CHARGER-10A.2 Instrukcja

15 Października 2024
Intenso

Intenso Powerbank 10400 Instrukcja

14 Października 2024
Gembird

Gembird CHM-03 Instrukcja

10 Października 2024
Kostal

Kostal IQ 8.5 Instrukcja

9 Października 2024
Venom

Venom VS5007 Instrukcja

9 Października 2024
Venom

Venom VS5010 Instrukcja

9 Października 2024
Venom

Venom VS2891 Instrukcja

9 Października 2024
Venom

Venom VS2881 Instrukcja

9 Października 2024
Venom

Venom VS2883 Instrukcja

9 Października 2024