Instrukcja obsługi Newland NVF260

Newland skaner NVF260

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Newland NVF260 (5 stron) w kategorii skaner. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

SCANNING MADE SIMPLE

NVF260

stationary scanner

user guide

Use of Programming Command

Besides the barcode programming method, the scanner can also be configured by serial commands (HEX) sent from the

host device. . All commands must be entered in uppercase letters

Command Syntax

Prefix StorageType Tag SubTag {Data} [,SubTag {Data}] [;Tag SubTag {Data}] […] Sufx

Prex 7E 01 30 30 30 30: “~ 0000” (HEX: <SOH> ) 6 characters. ,

StorageType: “ ” (HEX: ) or “#” (HEX: ), 1 character. “ ” means permanent setting which will not be lost by removing @40 23 @

power from the scanner or rebooting it; “#” means temporary setting which will be lost by removing power from the scanner

or rebooting . it

Tag: A 3-character case-sensitive eld that identies the desired command group. For example, all USB HID-KBW

conguration settings are identied with a Tag of KBW.

SubTag: A 3-character case-sensitive eld that identies the desired parameter within the tag group. For example, the

SubTag for the keyboard layout is CTY.

Data: The value for a feature or parameter setting, identied by the Tag and SubTag.

Sux: ETX>“;< ” (HEX: 3B 03) 2 characters. ,

Multiple commands can be issued within one Prefix/Sux sequence. For conguration commands, only the Tag, SubTag,

and Data elds must be repeated for each command in sequence. If an additional command is to be applied to the same

Tag, then the command is separated with a comma (,) and only the and elds of the additional commands SubTag Data

are issued. If the additional command requires a dierent eld, the command is separated from previous command by Tag

a semicolon (;).

Query Commands

For query commands, the entry in the eld in the syntax above is one of the following characters means: Data

* (HEX: 2A) What is the scanner’s current value for the setting(s).

& (HEX: ) What is the factory default value for the setting(s). 26

^ (HEX: ) What is the range of possible values for the setting(s). 5E

The value of the eld in a query command can be either StoreType “ ” (HEX: ) or “#” (HEX: @40 23).

A query command with the SubTag eld omitted means to query all the settings concerning a tag. For example, to query all

the current settings about Code 11, you should enter 7E 01 30 30 30 30 40 43 31 31 2A 3B 03 (i.e.

~<SOH>0000@C11*;<ETX>).

Responses

Dierent from command sequence, the prex of a response consists of the six characters of “<STX><SOH>0000” (HEX:

02 01 30 30 30 30).

The scanner responds to serial commands with one of the following three responses:

<ACK> (HEX: ) Indicates a good command which has been processed. 06

<NAK> (HEX: ) Indicates a good conguration command with its eld entry out of the allowable range for this 15 Data

Tag and SubTag combination (e.g. an entry for an inter-keystroke delay of 100 when the eld will

only allow 2 digits), or an invalid query command.

<ENQ> (HEX: ) Indicates an invalid Tag or SubTag command. 05

When responding, the scanner echoes back the command sequence with the status character above inserted directly

before each of the punctuation marks (the comma or semicolon) in the command.

Examples

Example 1: Enable Code 11, set the minimum and maximum lengths to 12 and 22 respectively.

Enter: 7E 01 30 30 30 30 40 43 31 31 45 4E 41 31 2C 4D 49 4E 31 32 2C 4D 41 58 32 32 3B 03

(~<SOH>0000@C11ENA1,MIN12,MAX22 ETX>) ;<

Response: 02 01 30 30 30 30 40 43 31 31 45 4E 41 31 06 2C 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03

(<STX><SOH>0000@C11ENA1<ACK>,MIN12<ACK>,MAX22<ACK> ETX>) ;<

Example 2 Query the current minimum and maximum lengths of Code 11. :

Enter: 7E 01 30 30 30 30 40 43 31 31 4D 49 4E 2A 2C 4D 41 58 2A 3B 03

(~<SOH>0000@C11MIN*,MAX* ETX>) ;<

Response: 02 01 30 30 30 30 40 43 31 31 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03

(<STX><SOH>0000@C11MIN12<ACK>,MAX22<ACK> ETX>) ;<

Specyfikacje produktu

Marka:	Newland
Kategoria:	skaner
Model:	NVF260
Kolor produktu:	Szary
Rodzaj zasilania:	USB
Wysokość produktu:	100 mm
Szerokość produktu:	65 mm
Głębokość produktu:	65 mm
Waga produktu:	347 g
Technologia łączności:	Przewodowa
Certyfikaty:	FCC Part15 Class B, CE EMC Class B
Zakres temperatur (eksploatacja):	0 - 50 °C
Zakres wilgotności względnej:	5 - 95 %
Przewody:	USB
Napięcie:	5 V
Zakres temperatur (przechowywanie):	20 - 70 °C
Model:	Wbudowany czytnik kodów kreskowych
Stopień ochrony IP:	IP64
Brzęczyk:	Tak
Typ skanera:	1D/2D
Zużycie energii:	230 mA
Standardowe interfejsy:	USB
Typ przetwornika obrazu:	CMOS
Cechy zabiezpieczeń:	Drop proof, Electrostatic Discharge (ESD) protection
Obsługa liniowych kodów kreskowych (1D):	Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), ISBN, ISSN, ITF-14, ITF-6, Industrial 2 of 5, Interleaved 2 of 5, MSI, Matrix 2 of 5, Plessey, UPC-A, UPC-E
Odczyt pod kątem nachylenia:	-40 - 40 °
Obsługa kodów kreskowych typu Matrix (2D):	Data Matrix, QR Code
Kąt odchylenia odczytu:	0 - 360 °
Regulowany kąt odczytu:	-40 - 40 °
Rozdzielczość czujnika optycznego (SxW):	1280 x 800 px