Instrukcja obsługi Netgear Nighthawk RAX50v2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear Nighthawk RAX50v2 (161 stron) w kategorii router. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/161
User Manual
Nighthawk AX6
6-Stream AX5400 WiFi Router
Model
RAX50
RAX50v2
NETGEAR, Inc.
350 E. Plumeria DriveAugust 2022
San Jose, CA 95134, USA202-12630-01
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while ying above 10,000 feet.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
Trademarks
Trademarks© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
2
Nighthawk AX6 6-Stream AX5400 WiFi Router
Contents
Chapter 1 Hardware Setup
Unpack your router...............................................................................9
Top panel LEDs and buttons.............................................................10
Rear panel............................................................................................12
Router label.........................................................................................13
Attach and position the antennas.....................................................13
Position your router............................................................................14
Wall-mount your router.....................................................................15
Cable your router...............................................................................16
Chapter 2 Connect to the network and access the router
Connect to the router network.........................................................18
Connect to the router using a wired connection.......................18
Connect to the router WiFi network............................................18
Connect to the WiFi network using WPS....................................18
Types of logins....................................................................................19
Use a web browser to access the router..........................................19
Automatic Internet setup..............................................................19
Log in to the router........................................................................21
Install and manage your router with the Nighthawk app..............21
Change the language........................................................................22
Chapter 3 Specify Your Internet Settings
Use the Internet Setup Wizard..........................................................24
Manually set up the Internet connection.........................................24
Specify an Internet connection without a login..........................24
Specify an Internet connection that uses a login.......................26
Specify IPv6 Internet connections....................................................27
Requirements for entering IPv6 addresses.................................28
Use auto detect for an IPv6 Internet connection........................28
Set up an IPv6 6to4 tunnel Internet connection.........................29
Set up an IPv6 pass-through Internet connection......................31
Set up an IPv6 xed Internet connection....................................32
Set up an IPv6 DHCP Internet connection..................................33
Set up an IPv6 PPPoE Internet connection..................................35
Use auto cong for an IPv6 Internet connection........................36
3
Set up an IPv6 6rd Internet connection.......................................38
Manage the MTU size.........................................................................40
MTU concepts.................................................................................40
Change the MTU size....................................................................41
Chapter 4 Control Access to the Internet
Network access control list................................................................43
Enable the network access control list, set the access rule, and
allow or block connected devices...............................................43
Manage allowed devices currently not on the network............45
Manage blocked devices currently not on the network...........47
Use keywords to block Internet sites...............................................49
Delete keywords from the blocked list............................................50
Block services from the Internet.......................................................50
Prevent blocking on a trusted computer.........................................52
Schedule when to block Internet sites and services......................52
Set up security event email notications.........................................53
Chapter 5 Manage Network Settings
View or change the WAN settings....................................................56
Set up a default DMZ server..............................................................57
Change the router’s device name....................................................58
Change the LAN TCP/IP settings......................................................58
Specify the IP addresses that the router assigns............................60
Disable the DHCP server feature in the router...............................61
Manage reserved LAN IP addresses................................................62
Reserve an IP address....................................................................62
Edit a reserved IP address............................................................63
Delete a reserved IP address entry..............................................63
Use the WPS Wizard for WiFi connections......................................64
Specify basic WiFi settings................................................................65
Change the WiFi mode......................................................................66
Change the WiFi mode if AX WiFi is enabled............................67
Change the WiFi mode if AX WiFi is disabled...........................68
Change the transmission power control.........................................69
Change the WiFi password or the WiFi security.............................70
Set up a guest WiFi network.............................................................71
Enable or disable the WiFi radios.....................................................73
Set up a WiFi schedule.......................................................................74
Set up the router as a WiFi access point..........................................75
Set up a bridge for a port group or VLAN tag group....................76
Set up a bridge for a port group..................................................76
Set up an IPTV port........................................................................77
Set up a bridge for a VLAN tag group........................................78
4
Nighthawk AX6 6-Stream AX5400 WiFi Router
Top panel LEDs and buttons
The status LEDs and two buttons are located on the top panel of the router.
Figure 2. Top view
Table 1. LED descriptions
DescriptionLED and Button
•Solid white. The router is ready.
•Blinking white Reset. The router is not ready, firmware is upgrading, or the
button was pressed.
•Off. Power is not supplied to the router.
Power LED
•Solid white. The Internet connection is ready.
•Blinking white. The port is sending or receiving traffic.
•Off. No Ethernet cable is connected between the router and the modem.
Internet LED
User Manual10Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Table 1. LED descriptions (Continued)
DescriptionLED and Button
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
•Solid white. The router detected a 1 Gbps link with a powered-on device.
•Blinking white. The port is sending or receiving traffic at 1 Gbps.
•Solid amber. The router detected a 100 Mbps or 10 Mbps link with a
powered-on device.
•Blinking amber. The port is sending or receiving traffic at 100 Mbps or 10
Mbps.
•Off. No device is connected to this Ethernet port.
Ethernet LEDs for ports 1–4
•Solid white. A USB device is connected and is ready.
•Blinking white. A USB device is plugged in and is trying to connect.
•Off Safely Remove. No USB device is connected, or someone clicked the
Hardware button and it is now safe to remove the attached USB device.
USB 3.0 port LED
Pressing the WiFi button for two seconds turns WiFi LED and WiFi radios on and
off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
WiFi LED
Pressing the WPS button lets your WPS-enabled device join your router's WiFi
network without typing the WiFi password. The WPS LED blinks white during
the WPS process and then lights solid white when the WPS-enabled device
connects to your router's WiFi network.
WPS LED
User Manual11Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Rear panel
The following figure shows the rear panel connectors and buttons.
Figure 3. Rear panel
The rear panel contains the following components:
1. . Pressing the button resets the router.Reset button Reset
If the button is pressed for at least 10 seconds and the Power LED blinks, theReset
router returns to its factory settings.
2. . Use the USB 3.0 port to connect USB storage device.USB 3.0 port
3. . Four Gigabit Ethernet RJ-45 LAN ports. Use these ports to connectEthernet ports
LAN devices to the router.
4. . One Gigabit Ethernet RJ-45 WAN port to connect the router to anInternet port
Internet modem such as a cable modem or DSL modem.
5. DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
6. . Press the button to provide power to thePower On/Off button Power On/Off
router.
User Manual12Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Router label
The router label shows the login information, WiFi network name (SSID), password,
serial number, and MAC address.
Figure 4. Router label
Attach and position the antennas
Before you install your router, attach the antennas to the router.
Note: If the antennas for your router do not have labels, they can be attached to any
antenna post on the router. If the antennas do have labels, match the labels on the
antennas with the labels on the router. Labeled antennas must be attached to the correct
antenna post on the router.
After you are done attaching the antennas, position the antennas as shown.
Figure 5. Attach and position the antennas
User Manual13Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Position your router
The router lets you access your network anywhere within the operating range of your
WiFi network. However, the operating distance or range of your WiFi connection can
vary signicantly depending on the physical placement of your router.
In addition, position your router according to the following guidelines:
•Place your router near the center of the area where your computers and other devices
operate, and within line of sight to your WiFi devices.
•Make sure that the router is within reach of an AC power outlet and near Ethernet
cables for wired computers.
•Place the router in an elevated location, minimizing the number walls and ceilings
between the router and your other devices.
•Place the router away from electrical devices such as these:
- Ceiling fans
- Home security systems
- Microwaves
- Computers
- Base of a cordless phone
- 2.4 GHz or 5 GHz cordless phones
•Place the router away from large metal surfaces, large glass surfaces, insulated walls,
and items such as these:
- Solid metal door
- Aluminum studs
- Fish tanks
- Mirrors
- Brick
- Concrete
The following factors might limit the range of your WiFi:
•The thickness and number of walls the WiFi signal passes through can limit the range.
•Other WiFi access points in and around your home might affect your router’s signal.
WiFi access points are routers, repeaters, WiFi range extenders, and any other
devices that emit a WiFi signal for network access.
User Manual14Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Wall-mount your router
You can wall-mount your router using the wall-mounting holes on the bottom of your
router.
Note: We recommend using M3 x 20 mm screws.
Figure 6. Bottom of the router
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3. Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4. Align the router’s wall-mounting holes with the screws and mount your router.
User Manual15Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
Cable your router
Power on your router and connect it to a modem.
Figure 7. Cable your router
To cable your router:
1. Unplug your modem, remove and reinsert the backup battery if it uses one, and
then plug the modem back in.
2. Use the Ethernet cable to connect the modem to the yellow Internet port on the
router.
Note: If your Internet connection does not require a modem, connect your main
Ethernet cable to the yellow Internet port on the router.
3. Connect the power adapter to your router and plug the power adapter into an outlet.
4. Press the button on the rear panel of the router.Power On/Off
The router’s Power LED lights solid white when the router is ready.
User Manual16Hardware Setup
Nighthawk AX6 6-Stream AX5400 WiFi Router
2
Connect to the network and access
the router
You can connect to the router’s WiFi networks or use a wired Ethernet connection. This
chapter explains the ways you can connect and how to access the router and log in.
The chapter contains the following sections:
• Connect to the router network
• Types of logins
• Use a web browser to access the router
• Install and manage your router with the Nighthawk app
• Change the language
17
Connect to the router network
You can connect to the router network using a wired, WiFi, or WPS connection.
Note: If you set up your computer to use a static IP address, change the settings so
that it uses Dynamic Host Conguration Protocol (DHCP).
Connect to the router using a wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to an Ethernet port on the router.
Your computer connects to the local area network (LAN).
Connect to the router WiFi network
You can connect WiFi-enabled devices to the router WiFi network using the router WiFi
network name and password.
To connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. On your WiFi-enabled device, open your device's WiFi network management settings.
3. Find and select the router WiFi network name (SSID).
The router WiFi network name (SSID) is on the router label.
4. Enter the router network key (password).
The router network key (password) is on the router label.
Your device connects to the WiFi network.
Connect to the WiFi network using WPS
You can connect WPS-enabled devices to the router’s WiFi network with Wi-Fi Protected
Setup (WPS). Your router has a button that you can use to connect WPS-enabledWPS
devices.
User Manual18Connect to the network and
access the router
Nighthawk AX6 6-Stream AX5400 WiFi Router
information and make sure that the computers and devices in the network are using
the settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
•The ISP conguration information for your DSL account
•ISP login name and password
•Fixed or static IP address setting (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
The NETGEAR installation assistant runs on any device with a web browser. Installation
and basic setup takes about 15 minutes to complete.
To automatically set up your router:
1. Make sure that the router is powered on.
2. Make sure that your computer or mobile device is connected to the router with an
Ethernet cable (wired) or over WiFi with the preset security settings listed on the
label.
Note: If you want to change the router’s WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
•The rst time you set up the Internet connection for your router, the browser goes
to and the Conguring the Internet Connectionhttp://www.routerlogin.net
page displays.
•If you already set up the Internet connection, enter http://www.routerlogin.net
in the address eld for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the NETGEAR installation assistant, do the following:
•Make sure that the computer is connected to one of the LAN Ethernet ports or
over WiFi to the router.
•Make sure that the router is receiving power and that its Power LED is lit.
User Manual20Connect to the network and
access the router
Nighthawk AX6 6-Stream AX5400 WiFi Router
Use the Internet Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automatically set up
your router. The Setup Wizard is not the same as the pages that display the rst time
you connect to your router to set it up.
To use the Setup Wizard:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter .http://www.routerlogin.net
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Setup Wizard
The Setup Wizard page displays.
5. Select the radio button.Yes
If you select the radio button, you are taken to the Internet Setup page (seeNo
Manually set up the Internet connection on page 24).
6. Click the button.Next
The Setup Wizard searches your Internet connection for servers and protocols to
determine your Internet conguration.
Manually set up the Internet connection
You can view or change the router’s Internet connection settings.
Specify an Internet connection without a login
To specify the Internet connection settings:
1. Launch a web browser from a computer or mobile device that is connected to
therouter network.
2. Enter .http://www.routerlogin.net
A login window opens.
User Manual24Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter .http://www.routerlogin.net
A login window opens.
3. Enter the router admin user name and password.
The user name is . The password is the one that you specied the rst timeadmin
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select .ADVANCED > Advanced Setup > IPv6
The IPv6 page displays.
5. From the menu, select .Internet Connection Type 6to4 Tunnel
The page adjusts.
The router automatically detects the information in the Router’s IPv6 Address on
LAN eld. This eld shows the IPv6 address that is acquired for the router’s LAN
interface. The number after the slash (/) is the length of the prex, which is also
indicated by the underline (_) under the IPv6 address. If no address is acquired, the
eld displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
• Auto. Your router uses any remote relay router that is available on the Internet.
This is the default setting.
•Static IP Address. Enter the static IPv4 address of the remote relay router. Your
IPv6 ISP usually provides this address.
7. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specic servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
8. Select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCPv6 client function.
•Auto Cong. This is the default setting.
User Manual30Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router
Specyfikacje produktu
| Marka: | Netgear |
| Kategoria: | router |
| Model: | Nighthawk RAX50v2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Netgear Nighthawk RAX50v2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje router Netgear
12 Stycznia 2025
11 Stycznia 2025
15 Października 2024
10 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
3 Października 2024
3 Października 2024
Instrukcje router
- router Samsung
- router Tenda
- router AEG
- router Motorola
- router Xiaomi
- router Huawei
- router TCL
- router TP-Link
- router Milwaukee
- router Gigabyte
- router Acer
- router Bosch
- router Hikvision
- router Roland
- router Nokia
- router Toolcraft
- router Festool
- router EZVIZ
- router Conceptronic
- router StarTech.com
- router Asus
- router Medion
- router Black & Decker
- router TRENDnet
- router MSI
- router D-Link
- router ATen
- router Siemens
- router Thrustmaster
- router DeWalt
- router Einhell
- router Alcatel
- router Sigma
- router HP
- router Teltonika
- router Silverline
- router Manhattan
- router Strong
- router Makita
- router Mikrotik
- router Cisco
- router Moxa
- router Synology
- router Gembird
- router ZTE
- router Lindy
- router Zebra
- router ZyXEL
- router Trust
- router LogiLink
- router Dell
- router IFM
- router Linksys
- router Google
- router Digitus
- router Vimar
- router Dahua Technology
- router Schneider
- router Kyocera
- router Sabrent
- router AVMATRIX
- router Renkforce
- router Thomson
- router AVM
- router BT
- router Totolink
- router Black Box
- router Güde
- router Apple
- router Lancom
- router Zoom
- router Iogear
- router Intellinet
- router Devolo
- router Vtech
- router Mercusys
- router I-TEC
- router Draytek
- router Edimax
- router Razer
- router AirLive
- router EnGenius
- router Planet
- router NEC
- router Blustream
- router LevelOne
- router Digi
- router Milesight
- router Rocstor
- router Hama
- router Ubiquiti Networks
- router Western Digital
- router ModeCom
- router Smart-AVI
- router Barco
- router Sagemcom
- router Juniper
- router Cudy
- router QNAP
- router Arris
- router Netis
- router Anker
- router Allnet
- router Marshall Electronics
- router Hitachi
- router M-life
- router AJA
- router Media-Tech
- router BenQ
- router Atlona
- router FSR
- router Gefen
- router Vivanco
- router Topcom
- router PowerPlus
- router HiKOKI
- router Blackmagic Design
- router Kathrein
- router JUNG
- router Foscam
- router Alfa
- router Porter-Cable
- router Metabo
- router Starlink
- router Keewifi
- router Digital Forecast
- router Keenetic
- router SPL
- router Cotech
- router Skil
- router Alfatron
- router Digitalinx
- router Clas Ohlson
- router KPN
- router Belkin
- router Kramer
- router KanexPro
- router Kopul
- router BZBGear
- router RGBlink
- router Key Digital
- router UPC
- router Lumantek
- router Allied Telesis
- router Actiontec
- router Proximus
- router Eminent
- router Sitecom
- router Sagem
- router Nilox
- router Sonos
- router Patton
- router Techly
- router Envivo
- router Buffalo
- router Nest
- router Vodafone
- router ICIDU
- router Milan
- router Konig
- router AT&T
- router Sweex
- router Aruba
- router Phicomm
- router Kasda
- router Technicolor
- router Verizon
- router Billion
- router T-Mobile
- router RAVPower
- router Hawking Technologies
- router Nexxt
- router WyreStorm
- router Beafon
- router Kraun
- router LTS
- router Zolid
- router Telstra
- router Holzmann
- router SIIG
- router Eero
- router Advantech
- router Mercku
- router Hercules
- router Xantech
- router Intelix
- router MuxLab
- router Pentagram
- router Ocean Matrix
- router Comprehensive
- router Arcadyan
- router Digiconnect
- router Ubee
- router SMC
- router Tele 2
- router Kogan
- router Peak
- router CradlePoint
- router Davolink
- router Sixnet
- router AVPro Edge
- router Evolution
- router 7inova
- router Predator
- router A-NeuVideo
- router United Telecom
- router F-Secure
- router Rosewill
- router Digicom
- router On Networks
- router Wisetiger
- router Leoxsys
- router Readynet
- router OneAccess
- router Accelerated
- router Nexaira
- router Hamlet
- router Approx
- router T-com
- router Amped Wireless
- router Cambium Networks
- router 3Com
- router Avenview
- router Ruckus Wireless
- router Dovado
- router Mach Power
- router EXSYS
- router NetComm
- router Comtrend
- router Premiertek
- router Bea-fon
- router GL.iNet
- router Shinybow
- router Edgewater
- router Atlantis Land
- router Lantronix
- router PulseAudio
- router Luxul
- router DVDO
- router StarIink
- router Silentwind
- router Keezel
- router VigilLink
Najnowsze instrukcje dla router
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025