Instrukcja obsługi Neets SB1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Neets SB1 (16 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Manual Sound Bar - SB1
Installation Manual
Page 2 of 16
Foreword
This document describes how to install and operate the Neets Sound Bar - SB1.
COPYRIGHT - All information contained in this manual is the intellectual property and copyrighted
material of Neets. All rights are reserved. No third party is allowed access to content,
information or data in this manual without Neets’ express written consent.
CHANGES - Neets reserve the right to change the specification and functions of this product
without prior notice.
Questions, AFTER reading this manual, can be addressed to the local distributor or:
Neets A/S
Langballe 4
8700 Horsens
Denmark
by E-Mail: Support@Neets.dk
or you may use our contact form at www.neets.dk
Revision list
This document has the following revision changes:
Author: Date Description Pages Rev
DB: 01-11-2017 First release All 1.00
What is in the box?
The box contain the following items:
1 x Neets – Sound Bar SB1
1 x Neets 24V/2.5A external power supply
1 x Power cable for power supply
2 x Terminal connectors
2 x Wall brackets
4 x M5 screws for wall brackets
4 x Rawlplugs
4 x Rubber feets
1 x Velcro set
DB: 13-11-2017
DB: 22-11-2017
Edits in chart
Edits to note
Paragraph removed
Edits to graphics
Section about Audio input settings removed
12
7
11
12
16
2.00
3.00
Page 3 of 16
Important Safety Instructions
Caution:
Read these instructions.
Read and understand all safety and operating instructions before using the equipment.
Keep these Instructions.
The safety instructions should be kept for future reference.
Heed all warnings.
Follow all warnings and instructions marked on the equipment or in the user information.
Avoid attachments.
Do not use tools or attachments that are not recommended, as they may be hazardous.
Warning!:
This equipment should be operated only from the included power supply.
To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the
desktop power module (if detachable), or from the power source receptacle (wall plug).
Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or
against them.
Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. There are no user-serviceable parts inside. To prevent the risk of
shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to
dangerous voltage or other hazards. Contact your local Neets reseller or distributor.
If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive
components inside. These openings must never be blocked by other objects.
Do not use this equipment near water.
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture and objects lled
with liquids.
Unplug the product before cleaning. Clean only with a dry cloth and not cleaning uid or aerosols. Such products
could enter the unit and cause damage, re, or electric shock. Some substances may also mar the nish of the
product.
FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
The Class A limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
FCC regulations state that any unauthorized changes or modications to this equipment, not expressly approved by
the manufacturer, could void the user’s authority to operate this equipment.
The lightning bolt triangle is used to alert the user to the presence of uninsulated “dangerous
voltages” within the unit’s chassis that may be of sufcient magnitude to constitute a risk of electric
shock to humans.
The exclamation point triangle is used to alert the user to presence of important operating and
service instructions in the literature accompanying the product.
!


Specyfikacje produktu

Marka: Neets
Kategoria: soundbar
Model: SB1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Neets SB1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje soundbar Neets

Neets

Neets SB1 Instrukcja

9 Września 2024

Instrukcje soundbar

Najnowsze instrukcje dla soundbar

Onkyo

Onkyo SBT-A500 Instrukcja

15 Października 2024
Insignia

Insignia NS-HTSB20S Instrukcja

15 Października 2024
Bose

Bose Smart Soundbar Instrukcja

9 Października 2024
LG

LG LAS350B Instrukcja

9 Października 2024
Samsung

Samsung HW-Q810D Instrukcja

9 Października 2024
Roku

Roku Streambar Pro Instrukcja

9 Października 2024
LG

LG S45TR Instrukcja

8 Października 2024
Majority

Majority Naga 80 Instrukcja

8 Października 2024
Majority

Majority Teton Instrukcja

8 Października 2024
Majority

Majority Naga 60 Instrukcja

8 Października 2024