Instrukcja obsługi Nedis SOIR48DI
Nedis
maszyna do lutowania
SOIR48DI
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nedis SOIR48DI (25 stron) w kategorii maszyna do lutowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/25

English Deutsch Français Nederlands Italiano Español Magyar Suomi Svenska Česky Română Ελληνικά
SOIR48DI
MANUAL
Soldering Iron
MODE D’EMPLOI
Fer à souder
MANUALE
Saldatrice
BRUKSANVISNING
Lödkolv
MANUAL DE UTILIZARE
Ciocan de lipit
HASZNÁLATI ÚTMUTATÓ
Forrasztópáka
KÄYTTÖOHJE
Juotoskolvi
GEBRUIKSAANWIJZING
Soldeerbout
ANLEITUNG
Lötkolben
MANUAL DE USO
Soldador
NÁVOD K POUŽITÍ
Páječka
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ Σταθμός
κόλλησης

English
Deutsch
FrançaisNederlandsItalianoEspañolMagyarSuomiSvenskaČeskyRomânăΕλληνικά
2
ENGLISH
Introduction:
The temperature controllable soldering iron is suitable for a wide range of
soldering applications. The adjustable temperature range provides a solution
to many different soldering tasks.
Operation:
1). Set the temperature control to the desired temperature
2). Plug the power plug into a wall socket (220~240VAC)
3). The soldering iron will automatically heat up in ±180 seconds
How to solder:
1). Wipe off any dirt, rust or paint from the part you wish to solder
2). Heat the part with the tip of the soldering iron and add a little bit of resin-
based tin (recommended) soldering
3). Wait for the soldering tin to cool down before moving the part
Replace soldering tip:
1). Remove the plug from the wall socket and let the soldering iron cool
down before changing the tip
2). Remove the two screws at the soldering tip
3). Replace the soldering tip with a new soldering tip ( )SOIR48DI
4). Place the two screws back on the soldering tip and tighten them
Remarks:
Use genuine spare parts onlyNedis

English
Deutsch
FrançaisNederlandsItalianoEspañolMagyarSuomiSvenskaČeskyRomânăΕλληνικά
4
Safety precautions:
RISK OF E LECT RIC S HOCK
DO NOT OPEN
CAUTION
Protect yourself against an electric shock.
To reduce risk of electric shock, this product
should ONLY be opened by an authorized
technician when service is required. Disconnect
the product from mains
Do not expose the product to water or moisture.
Unplug the soldering iron when not in use.
Do not place any ammable object in the nearness of the hot soldering iron.
Use the soldering iron only at the mentioned voltage.
Permit nobody to touch the tool or the cable.
Do not use the soldering iron for purposes it is not intended for.
Danger of burn by liquid solder, protect yourself against tin splashed with protective
goggles.
Use the soldering iron in a ventilated room.
Always take care of the cable in nearness of heat, oil and sharp edges.
Use a clamping device to secure the soldering material.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the
product or damage caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their
respective holders and are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and
electronic products should not be mixed with general household waste.
There is a separate collections system for these products.
Copyright ©
Specyfikacje produktu
Marka: | Nedis |
Kategoria: | maszyna do lutowania |
Model: | SOIR48DI |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nedis SOIR48DI, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do lutowania Nedis

13 Września 2024

23 Sierpnia 2024
Instrukcje maszyna do lutowania
- maszyna do lutowania Milwaukee
- maszyna do lutowania Yato
- maszyna do lutowania Parkside
- maszyna do lutowania Toolcraft
- maszyna do lutowania Einhell
- maszyna do lutowania Silverline
- maszyna do lutowania Denon
- maszyna do lutowania Mercury
- maszyna do lutowania Ozito
- maszyna do lutowania RYOBI
- maszyna do lutowania DEDRA
- maszyna do lutowania Ersa
- maszyna do lutowania BaseTech
- maszyna do lutowania Trotec
- maszyna do lutowania Velleman
- maszyna do lutowania Güde
- maszyna do lutowania GYS
- maszyna do lutowania Telwin
- maszyna do lutowania Westfalia
- maszyna do lutowania Ferm
- maszyna do lutowania Weller
- maszyna do lutowania Craftsman
- maszyna do lutowania Fieldmann
- maszyna do lutowania Ridgid
- maszyna do lutowania PowerPlus
- maszyna do lutowania Awelco
- maszyna do lutowania Powerfix
- maszyna do lutowania Monacor
- maszyna do lutowania Sievert
- maszyna do lutowania Maestro
- maszyna do lutowania Cocraft
- maszyna do lutowania Steren
- maszyna do lutowania HQ
- maszyna do lutowania Truper
- maszyna do lutowania Cigweld
- maszyna do lutowania Holzmann
- maszyna do lutowania Epcom
- maszyna do lutowania Uten
- maszyna do lutowania CFH
- maszyna do lutowania Edsyn
- maszyna do lutowania Mag-Torch
- maszyna do lutowania UNIMIG
- maszyna do lutowania Portasol
- maszyna do lutowania JBC
- maszyna do lutowania Hakko
- maszyna do lutowania Fixpoint
- maszyna do lutowania Stamos
Najnowsze instrukcje dla maszyna do lutowania

11 Stycznia 2025

5 Stycznia 2025

4 Stycznia 2025

4 Stycznia 2025

3 Stycznia 2025

3 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025