Instrukcja obsługi Nectre MK3

Nectre Podgrzewacz MK3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nectre MK3 (12 stron) w kategorii Podgrzewacz. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
Revision B
Nectre MK3
Operang Instrucons
Ecient—Warm—Friendly
Keep instrucons in a safe place for future reference
Do not throw away
Pecan Engineering Pty Limited proudly supports the acvies of Landcare Australia through its membership of the AHHA
2
USER INSTRUCTIONS
1.0
INTRODUCTION ……………………………………………
2
2.0
USING APPLIANCE FOR FIRST TIME ………………
3
3.0
RECOMMENDED FUELS ………………………………..
3
4.0
LIGHTING THE FIRE ………………………………………
3
5.0
RUNNING THE APPLIANCE …………………………..
4
6.0
BURNING TIPS …………………………………………….
4
7.0
ASH REMOVAL …………………………………………….
5
8.0
FLUE/CHIMNEY FIRE …………………………………….
5
9.0
CLEANING PAINTWORK & GLASS ………………….
5
10.0
CLEANING THE FLUE …………………………………….
5
11.0
TROUBLESHOOTING TIPS …………………………….
6
MAINTENANCE & SERVICING
1.0
REPLACEMENT OF FIREBRICKS ……………………..
6
2.0
REPLACEMENT OF BRICK RETAINER …………….
6
3 .0
REPLACEMENT OF BAFFLE PLATES …………………
7
4 .0
FITTING A NEW DOOR GLASS ……………………….
7
5 .0
FITTING A NEW DOOR SEAL ………………………….
8
6 .0
ADJUSTING DOOR LATCH …….……………………….
8
7.0
REPLACEMENT OF ASH PLATE ………………………
8
8 .0
CHANGING FAN CONTROLLERS …………………….
CHANGING FAN ASSEMBLY……………………………
REPLACEMENT SPARE PARTS LIST…………………
WARRANTY………………………………………………….
8
9.0
9
10.0
10
11.0
11
Before use of this appliance please read these instrucons
fully.
WARNING: ANY MODIFICATION OF THE APPLIANCE THAT
HAS NOT BEEN APPROVED IN WRITING BY THE TESTING
AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4012 &
4013.
WARNING: DO NOT USE FLAMMABLE LIQUIDS OR
AEROSOLS TO START OR REKINDLE THE FIRE.
WARNING: DO NOT USE FLAMMABLE LIQUIDS OR
AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHEN IT IS
OPERATING.
WARNING: DO NOT STORE FUEL WITHIN HEATER
INSTALLATION CLEARANCES.
WARNING: WHEN OPERATING THIS APPLIANCE AS AN
OPEN FIRE USE A FIRE SCREEN.
WARNING: OPEN AIR CONTROL (AND DAMPER WHEN
FITTED) BEFORE OPENING FIRING DOOR.
CAUTION: THIS APPLIANCE SHOULD NOT BE OPERATED WITH
A CRACKED GLASS.
CAUTION: THIS APPLIANCE SHOULD BE MAINTAINED AND
OPERATED AT ALL TIMES IN ACCORDANCE WITH THESE
INSTRUCTIONS.
CAUTION: THE USE OF SOME TYPES OF PRESERVATIVE-
TREATED WOOD AS A FUEL CAN BE HAZARDOUS.
The appliance or ue system should not be modied in any
way without the wrien approval of the manufacturer.
Extractor fans or cooker hoods must not be placed in the
same room or space as this can cause appliance to emit
smoke into the room.
Our cleanburn technology promotes greater eciency
1. INTRODUCTION
USER INSTRUCTIONS
TABLE OF CONTENTS
3
Air Controls
The Nectre MK3 has two air controls for controlling the
re.
Top air slide:- This allows air to enter the rebox from above
the door where it is then drawn down into the base of the re
while keeping the glass clean. Pulling the air slide out oers
maximum burn rate, while sliding it in oers minimum burn
rate.
Boom air slide:- This allows air to enter directly into the base
of the re and is used as a boost especially when geng the
re up to temperature.
Secondary air holes in the rear of the rebox provide
addional oxygen for a more complete combuson of the
gases released from the burning wood.
Door Handle
Warning: the door handle may get hot if appliance has been
le in High burn seng for an extended period of me. In
which case use a protecve glove or equivalent to open.
Open air slide before opening the door to eliminate the
chance of backdra and/or smoke entering the room.
Fan
The fan can be used to spread heat around the room quicker,
as well as distribute heat into other rooms. It does not have to
be on if not required.
A remote control supplied with the heater is used to turn the
fan on and determine the chosen speed.
If the radio frequency used by the remote control interferes
with other frequencies in the home such as wireless internet
or child monitor refer to “8. Change Fan Controller Frequency”
in the Maintenance & Servicing secon for details on changing
the frequency.
First few mes the appliance is lit, it will give o some
odorous fumes. This is caused by the paint curing.
Do not touch the paint work while it is curing otherwise
it can leave a permanent mark on the appliance.
Once the paint has cured it will not re-occur.
Keep the room well venlated unl these fumes have
cleared.
Burn only seasoned hardwood mber with a moisture
content of less than 20%.
Newly cut wood should be allowed to dry/season for 12
to 18 months before use.
Wood should be stored in an environment protected
from the weather to minimise any potenal moisture
content.
For best results, wood should not exceed 350mm in
length and 150mm diameter. Any larger and appliance
will not operate at its opmum. It is beer to burn
several smaller pieces of wood than one large single
piece.
Poor quality mber:
o
Causes low combuson eciency
o
Produces poor emissions (smok y)
o
Results in addional buildup of creosote (soot) in the
ue which will then require regular cleaning and may
result in a ue re.
Do not burn painted, impregnated/treated wood,
manufactured board products or pallet wood.
Place relighters or paper and dry kindling wood in the
base of the rebox.
Open both air controls :
o
Top air slide pull knob all the way out (to the le) –
o
Boom air slide slide spring handle across to the –
le
2. USING APPLIANCE FOR FIRST TIME
4. LIGHTING THE FIRE
3. RECOMMENDED FUELS
Top air slide Boom air slide

Specyfikacje produktu

Marka: Nectre
Kategoria: Podgrzewacz
Model: MK3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nectre MK3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Podgrzewacz Nectre

Nectre

Nectre Form 2 Instrukcja

16 Września 2024
Nectre

Nectre MK3 Instrukcja

16 Września 2024
Nectre

Nectre MK2 LE Instrukcja

15 Września 2024
Nectre

Nectre N900 Instrukcja

15 Września 2024
Nectre

Nectre Inbuilt Instrukcja

15 Września 2024
Nectre

Nectre MK1 LE Instrukcja

15 Września 2024
Nectre

Nectre N60 Instrukcja

14 Września 2024
Nectre

Nectre Form 1 Instrukcja

6 Września 2024
Nectre

Nectre Big Bakers Oven Instrukcja

5 Lipca 2024

Instrukcje Podgrzewacz

Najnowsze instrukcje dla Podgrzewacz

Electrolux

Electrolux EO12D103C0 Instrukcja

21 Grudnia 2024
Electrolux

Electrolux EO12D104C0 Instrukcja

21 Grudnia 2024
NewAir

NewAir AH-450B Instrukcja

20 Grudnia 2024
NewAir

NewAir NGH1K6WH00 Instrukcja

20 Grudnia 2024
Sencor

Sencor SOH 8211GY Instrukcja

20 Grudnia 2024
Yamazen

Yamazen DSF-VE121 Instrukcja

19 Grudnia 2024
Yamazen

Yamazen DSE-SKC103 Instrukcja

19 Grudnia 2024
Yamazen

Yamazen DBC-L122 Instrukcja

19 Grudnia 2024
Yamazen

Yamazen DMSF-J062 Instrukcja

19 Grudnia 2024
Yamazen

Yamazen DC-ZT12 Instrukcja

19 Grudnia 2024