Instrukcja obsługi NEC SDM-HDBT-R-UHD

NEC Nie skategoryzowane SDM-HDBT-R-UHD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC SDM-HDBT-R-UHD (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Intel SDM based
HDBaseT 4K/UHD Receiver
USER MANUAL
SDM- -R- HDBT UHD
USER MANUAL v.1.4
Overview
The SDM-HDBT-R- -UHD can be installed in any display that is equipped with Intel SDM S
or SDM- -L slot. The SDM HDBT-R-UHD uses HDBaseT™, it is compatible ntac with Apa
HDBT-1-E- UHD transmitters and can extend 1080P HDMI signal up to 100/150 meters
and 4K/UHD HDMI signals up to 70 meters.
Package Contents
§ 1 x SDM-HDBT-R- UHD
§ 1 x User manual
§ 1 x SDM S mounting bracket-
§ 1 x SDM-L mounting bracket
§ 1 x IR receiver
§ 1 x IR blaster
Features
n Supports 4K@60Hz (4:4:4 up to 100 meters with CAT6a) /CAT7 cables
n Supports 4K@60Hz (4:2:0) 1080P (12bit) and 3D up to 100 metersand
n Supports HDMI 2.0
n Supports HDCP 1.4 and 2.2
n Supports 3D pass- through
n Supports CEC pass ugh-thro
n Supports RS directional)- -232 (Bi
n Supports all frequency of IR control
n Supports HDBaseT Mode with Apantac H DBaseT Transmitter
n Supports all digital audio meter modes
n Supports P@60Hz / 8bitLong Reach Mode ( 0108 , up to 150 meters) with Apantac
HDBaseT Transmitter
Specifications
Function
SDM-HDBT-R- UHD
SDM Edge Connector
Intel SDM PCIex8(98pin) x1
HDBaseT Link In
RJ45x1
IR In
3.5ψ Stereo Jack x 1
IR Out
3.5ψ Stereo Jack x 1
St atus LEDs
4 in 1 LED
Max Resolution
4K@60Hz (4:4:4/4:2:0), 4K@30Hz, 1080P@60Hz
Cable distance
100 m for 4K@60Hz(4:4:4) with CAT6a/CAT7 cables,
1 0 00/150m for 1080P@6 Hz
Mounting Brackets
SDM- -L S, SDM
Weight
Board - - - 60g, SDM S 80g, SDM L 160g
Dimensions (LxWxH)
Board - -60x110x20, SDM S – -L – 80x124x25, SDM
195x124x25 mm
FRONT VIEW
1. S tatus LED Power, HDCP, LINK, MODE
Power Green = On
HDCP HDMI Flashing = HDMI in, Off = no
LINK – Green = HDBaseT in
MODE – = Flashing Receiver working properly
2. LINKED In – 5 RJ4
3. or IR recever cable) IR In (f
4. IR Out (for IR blaster cable)
-SDM S Mounting Bracket
SDM-L B Mounting racket
Assembly
SDM-S
SDM-L
IR B r Cableslaste
© 2019 APANTAC LLC, all rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97 , USA 005
PHONE +1 503 968 3000, FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”) products.
Apantac makes no representation or warranties with respect to the accuracy or completeness of the
contents of this publication and reserves the right to make changes to specification and product descriptions
at any time without notice
1
21.Tip : Anode(+)
2.Sleeve : Cathode(-)
1
2
3
1.Tip : Signal
2.Ring : GND
3.Sleeve : Power


Specyfikacje produktu

Marka: NEC
Kategoria: Nie skategoryzowane
Model: SDM-HDBT-R-UHD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC SDM-HDBT-R-UHD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane NEC

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane