Instrukcja obsługi Nebula Prizm

Nebula Nie skategoryzowane Prizm

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nebula Prizm (12 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
Nebula Prizm
User Manual
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of
Anker Innovations Limited, registered in the
United States and other countries.
Mode: D2210
For FAQs and more information, please visit:
www.SeeNebula.com
support@SeeNebula.com
+1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT)
51005000706 V01
English
01
Important Safety Instructions
Read and understand all instructions before you use this device.
Do not make any changes or settings that are not described in this
manual. If physical injury, loss of data, or damage is caused by
failure to follow instructions, the warranty does not apply.
Setup
• Toreducetheriskofreand/orelectricshock,donotexpose
thedevicetorainormoisture,andobjectslledwithliquids,
such as vases, should not be placed on the device.
• Donotplacethedeviceinareassusceptibletoexcessive
dust and dirt or near any appliance generating a strong
magneticeld.
• To prevent overheating, do not block or clog the ventilation
openings.
• Neverplacethedeviceinaconnedspace.Alwaysleave
enough space around the device for ventilation.
• Protect the device against direct sunlight, heat, large
temperature fluctuations, and moisture.
• When the device runs for a long period of time and the
surface becomes hot, shut it down and unplug the power
cord. Resume operation only after the device has cooled.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the
power cord.
• To avoid electric shock, do not disassemble.
• Onlyuseattachmentsoraccessoriesspeciedbythe
manufacturer.
• Avoidextremevibration.Itmaydamagetheinternal
components.
Table of Content
01  ImportantSafetyInstructions
04  What’sIncluded
04  Overview
07  GettingStarted
11  UsingtheNebulaPrizm
15  UpdatingtheFirmware
16  Specications
17  Troubleshooting
18  Notice
19  Trademarks
20  Warranty
English
English
02 03
• Do not allow children to handle the device without supervision.
• Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions: a)
if the device is moved from a cold to a warm area; b) after a
cold room is heated; c) when the device is placed in a damp
room. To avoid any moisture, seal the device in a plastic bag
before moving it to another room, and wait for one to two
hours before you take it out of the bag.
Power Supply
• Power off the device before removing the power supply from
the socket.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
wheretheyexitfromthisdevice.
• Unplug this device if there are lightning storms or when
unused for a long period of time.
• Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
• Before you make or change any connections, ensure that all
devices are disconnected from the power outlet.
• Never touch the mains cable of the mains connection with
wet hands.
Hearing Safety
• Toavoidhearingdamage,donotlistenforextendedperiods
at high volume. Set the volume at a safe level.
Cleaning
• Power off the device and remove it from the power supply
before cleaning the surface.
• Useasoft,lint-freecloth.Neveruseliquid,gaseous,or
easily flammable cleansers (like sprays, abrasives, polishes,
and alcohol).
• Donotuseanyliquidcleaningagentstocleanthelensas
they may damage the protective coating on the lens.
• Wipe the surfaces gently. Be careful that you do not scratch
the surfaces.
• Use lens cleaning paper to clean the lens of this projector.
Repairs
• Do not make any repairs to the device yourself. Only have
your device repaired by an authorized service center.
• Improper maintenance can result in injuries or damage to
the device.
• Referallservicingtoqualiedservicepersonnel.
Class II equipment symbol
This symbol indicates that the unit has a double insulation system.
Laser Safety
CLASS 1
LASER PRODUCT
IEC 60825-1:2014. Complies with IEC 62471:2006 Risk Group 2.
Caution:
• Possibly hazardous optical radiation emitted from this
device.
• Do not stare at the operating beam. The bright light may hurt
your eyes.

Specyfikacje produktu

Marka: Nebula
Kategoria: Nie skategoryzowane
Model: Prizm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nebula Prizm, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Nie skategoryzowane Nebula

Nebula

Nebula Prizm Instrukcja

10 Marca 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

MOOOV

MOOOV Lapin Flocon 477511 Instrukcja

14 Marca 2025
MOOOV

MOOOV 395034 Instrukcja

14 Marca 2025
MOOOV

MOOOV 730391 Instrukcja

14 Marca 2025
AirLive

AirLive Live-26G Instrukcja

14 Marca 2025
AirLive

AirLive Live-5GT Instrukcja

14 Marca 2025
Keter

Keter California Instrukcja

14 Marca 2025
AirLive

AirLive Ether-8GF Instrukcja

14 Marca 2025
AirLive

AirLive Live-2TX402 Instrukcja

14 Marca 2025
AirLive

AirLive Extender N3A Instrukcja

14 Marca 2025
AirLive

AirLive Extender N3 Instrukcja

14 Marca 2025