Instrukcja obsługi MuxLab 500216

MuxLab odbiornik 500216

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MuxLab 500216 (16 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Audio Zone Amplifier
2 x 20 watts
Installation Guide
500 162
© MuxLab Inc. 2015 - - - -A 94 000805 A / SE 000805
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water. Keep the pro duct away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
• Using supplies or parts not meeting the product’s specifications may cause damage,
deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• Install the device in a place with good ventilation to avoid damage due to
overheating.
• Unplug the power cord when left unused for a long period of time.
• Do not put any heavy items on the unit or on extension cable.
• Do not remove the housing of the device as you may be exposed to dangerous
voltage or other hazards.
• Information on disposal of devices: do not burn or mix with general household
waste, please treat them as normal electrical wastes.
• Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
• Please read this user manual carefully before using this product.
© MuxLab Inc. 2015 2
Contents
Introduction ............................................................................................................... 4 1.
1.1. Introduction to the 500216 ............................................................................. 4
1.2. Features ......................................................................................................... 4
1.3. Package Content ........................................................................................... 5
Specification .............................................................................................................. 6 2.
System Connection ................................................................................................... 7 3.
3.1. Safety Precautions ......................................................................................... 7
3.2. System Diagram ............................................................................................ 7
3.3. Audio Output .................................................................................................. 7
3.3.1. Default output: 2x20 Watt @ 4-ohm ..................................................... 7
3.3.2. Bridge connection: 1x40 Watt @ 8-ohm .............................................. 8
3.3.3. Dual -mono Output 8...............................................................................
3.4. Connection of Microphone ............................................................................. 9
3.4.1. 48V phantom power input mode .......................................................... 9
3.4.2. MIC input mode ................................................................................... 9
3.4.3. LINE input mode .................................................................................. 9
Operation of the Control Panel and the IR Remote ................................................. 10 4.
4.1. Operation of the Control Panel .................................................................... 10
4.1.1. Audio switching .................................................................................. 10
4.1.2. Volume and Equalization control ........................................................ 10
4.2. Using of the IR Remote ................................................................................ 11
4.2.1. IR Remote buttons ............................................................................. 11
4.2.2. IR Remote codes ............................................................................... 11
Operations of RS232 Control .................................................................................. 12 5.
5.1. RS232 Communication Commands ............................................................. 12
Panel Drawing ......................................................................................................... 13 6.
Troubleshooting & Maintenance .............................................................................. 14 7.
Regulatory Compliance ................................................................................................ 15
© MuxLab Inc. 2015 3

Specyfikacje produktu

Marka: MuxLab
Kategoria: odbiornik
Model: 500216

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MuxLab 500216, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik MuxLab

MuxLab

MuxLab 500216 Instrukcja

1 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024