Instrukcja obsługi Moxa NPort 6610-32

Moxa serwer NPort 6610-32

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Moxa NPort 6610-32 (7 stron) w kategorii serwer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
P/N: 1802066500020
*1802066500020*
NPort 6600 Series
Quick Installation Guide
Version 12.1 21 , January 20
Technical Support Contact Information
www.moxa.com/support
21 . A20 Moxa Inc ll rights reserved.
- - 2
Overview
The NPort 6600 series of serial device servers includes 8- -port, 16 port,
and 32-port models for connecting larger numbers of serial devices to
Ethernet. Some applications now also require better security when
transmitting data through a network. The NPort 6600 series of device
servers use DES, 3DES, and AES data encryption to provide secure
network communication.
Package Checklist
Before Installing your NPort 6600 series secure device server, verify that
the package contains the following items:
NPort 6600 device server
- - - CBL RJ45M9 150: 8 pin RJ45 to DB9 male connection cable, 150 cm
Power Cord (AC models only)
- Two rack mount ears
Documentation
Quick installation guide (printed)
Warranty card
Optional Accessories
-35 - M K DK A: 35 mm DIN Rail ounting it
- DIN Rail Power Supply
- - - X NM TX01/NM TX01 T: Network module with one 10/100BaseT
Ethernet port ( c r RJ45 connector; supports ascade edundancy)
- -S- - -S- - NM FX01 SC/NM FX01 SC T: Network module with one
100BaseFX s m f c ; ingle ode iber port (SC onnector supports cascade
redundancy)
- -S- - -S- - NM FX02 SC/NM FX02 SC T: Network module with two
100BaseFX single mode fiber ports (SC c connectors; supports ascade
r edundancy)
- -M- - -M- - NM FX01 SC/NM FX01 SC T: Network module with one
100BaseFX multiode fiber port (SC connector; supports cascade
r ) edundancy
- -M- - -M- - NM FX02 SC/NM FX02 SC T: Network module with two
100BaseFX m -m fulti ode iber ports (SC connectors; supports cascade
r edundancy)
NOTE: Please notify your sales representative if any of the above items is
missing or damaged.
- - 3
Hardware Introduction
Demonstrated 8 port model to be an example.
Reset Button
Press the Reset button continuously for 5 second to load factory defaults:
Use a pointed object to press the reset button. Release the button after
the Ready LED stops blinking.
RS- /d n ) 485 adjustable pull up ow resistor (150/1 KΩ
The NPort 6650 has 3 DIP Switches associated with each serial port for
configuring the pull up/ -down resistors for RS 485 applications. The
switches are located in a recess on the bottom of the NPort 6650. To
access the switches, first remove the panel covering the recess.
SW
1
3
Pull Up
Terminator
ON
1 KΩ
1 20 Ω
OFF
1 K 50 Ω
NOTE
For RS-232 applications, all DIP Switches for the port should be
set to the OFF position.


Specyfikacje produktu

Marka: Moxa
Kategoria: serwer
Model: NPort 6610-32

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Moxa NPort 6610-32, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje serwer Moxa

Instrukcje serwer

Najnowsze instrukcje dla serwer