Instrukcja obsługi Moxa MGate MB3270I

Moxa nieskategoryzowany MGate MB3270I

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Moxa MGate MB3270I (7 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

P/N: 1802031700017

*1802031700017*

MGate MB3170/MB3270 Series

Quick Installation Guide

Vers 20ion January 8.2, 21

Technical Support Contact Information

www.moxa.com/support



2 . A 20 1 Moxa Inc ll rights reserved.

- - 2

Overview

The MGate MB3170 and MB3270 are 1 and 2- port advanced Modbus

gateways that convert between Modbus TCP and Modbus ASCII/RTU

protocols. They can be used to allow Ethernet masters to control serial

slaves, or to allow serial masters to control Ethernet slaves. Up to 32 TCP

masters and slaves can be connected simultaneously. The MGate MB3170

and MB3270 can connect up to 31 or 62 Modbus RTU/ASCII slaves,

respectively.

Package Checklist

Before installing the MGate MB3170 or MB3270, verify that the package

contains the following items:

• 2 MGate MB3170 or MB3 70 Modbus gateway

• i g Quick nstallation uide (printed)

• W arranty card

Optional Accessories:

• - DK-35A: DIN rail mounting kit (35 mm)

• Mini DB9F- -to TB Adaptor: DB9 female to terminal block adapter

• - DR-4524: 45W/2A DIN rail 24 VDC power supply with universal 85

to 264 VAC input

• - DR- -75 24: 75W/3.2A DIN rail 24 VDC power supply with universal

85 to 264 VAC input

• - DR- -120 24: 120W/5A DIN rail 24 VDC power supply with 88 to 132

VAC/176 to 264 VAC input by switch

NOTE

Please notify your sales representative if any of the above items

is missing or damaged.

Hardware Introduction

LED Indicators

Name

Color

Function

PWR1

Red

Power is being supplied to the power input

PWR2

Red

Power is being supplied to the power input

RDY

Red

Steady: Power is on and the unit is booting up

Blinking: IP conflict, DHCP or BOOTP server did not

respond properly, or a relay output occurred

Green

Steady: Power is on and the unit is functioning

normally

Blinking: Unit is responding to locate function

Off

Power is off or power error condition exists

Ethernet

Amber

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected or has a short

P1 , P2

Amber

Serial port is receiving data

Green

Serial port is transmitting data

Off

Serial port is not transmitting or receiving data

FX Amber

Steady on: Ethernet fiber connection, but port is

idle.

Blinking: Fiber port is transmitting or receiving

data.

Off

Fiber port is not transmitting or receiving data.

- - 3

Reset Button

Press the Reset button continuously for 5 sec to load factory defaults:

The reset button is used to load factory defaults. Use a pointed object

such as a straightened paper clip to hold the reset button down for five

seconds. Release the reset button when the Ready LED stops blinking.

Panel Layouts

The MGate MB3170 has a male DB9 port and a terminal block for

connecting to serial devices. The MGate MB3270 has two DB9 connectors

for connecting to serial devices.

Specyfikacje produktu

Marka:	Moxa
Kategoria:	nieskategoryzowany
Model:	MGate MB3270I
Materiał obudowy:	Plastik
Certyfikaty:	CE, FCC, UL/cUL
Prędkość transferu danych przez Ethernet LAN:	10, 100 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	0 - 55 °C
Zakres wilgotności względnej:	5 - 95 %
Napięcie:	12 - 48 V
Zakres temperatur (przechowywanie):	-40 - 85 °C
Wymiary produktu (SxGxW):	29 x 89.2 x 124.5 mm
System operacyjny:	Windows 98/ME/NT/2000\nWindows XP/2003/Vista/2008/7 x86/x64
Typ napędu:	Brama sieci komórkowej
Bezpieczeństwo:	UL (UL60950-1), TÜV (EN60950-1)
Automatyczne MDI/MDI-X:	Tak
MTBF (Średni okres międzyawaryjny):	125234 h
Sieć danych:	Nieobsługiwany
Szeregowe porty komunikacyjne:	2
Interfejs SCSI:	RS-232/422/485
Standardy EMC:	EN61000-4-2 (ESD) lvl 3, EN61000-4-3 (RS) lvl 3, EN61000-4-4 (EFT) lvl 4, EN61000-4-5 (Surge) lvl 3, EN61000-4-6 (CS) lvl 3, EN61000-4-8, EN61000-4-11, EN61000-4-12
Izolacja:	2 kV
Ochrona przed wyładowaniem elektrostatycznym:	15 kV
Sygnały złącza RS-232:	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Szybkość transmisji:	0.050 Kbit/s
Ilość bitów danych:	7, 8
Sygnały złącza RS-422:	RxD+, RxD-, SGND, TxD+, TxD-
Sygnały złącza RS-485:	Data+, Data-, RxD+, RxD-, SGND, TxD+, TxD-