Instrukcja obsługi Motu UltraLite-mk4

Motu DJ Gear UltraLite-mk4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Motu UltraLite-mk4 (94 stron) w kategorii DJ Gear. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/94
UltraLite-
mk4
User Guide
1280 Massachusetts Avenue
Cambridge, MA 02138
Business voice: (617) 576-2760
Business fax: (617) 576-3609
Web site: www.motu.com
Tech support: www.motu.com/support
SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS FOR THE UltraLite-mk4 (“PRODUCT)
CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY
INSTRUCTIONS COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.
HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS
1. Read these instructions. All the safety and operating instructions should be read before operating the product.
2. Keep these instructions. These safety instructions and the product owner’s manual should be retained for future reference.
3. Heed all warnings. All warnings on the product and in the owner’s manual should be adhered to.
4. Follow all Instructions. All operating and use instructions should be followed.
5. Do not use the product near water.
6. Cleaning - Unplug the product from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.
7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Heat - Do not install the product near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an amplifier)
that produces heat.
9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical shock.
10.Power supply cord - Protect the product power supply cord from being walked on or pinched by items placed upon or against them.
11.Power switch - Install the product so that the power switch can be accessed and operated at all times.
12.Disconnect - The main power supply plug is considered to be the disconnect device for the product and shall remain readily operable.
13.Accessories - Only use attachments/accessories specified by the manufacturer.
14.Surge protection - Unplug the product during lightning storms or when unused for long periods of time.
15.Servicing - Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as
when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed
to rain or moisture, does not operate normally, or has been dropped.
16.Power Sources - Refer to the manufacturer’s operating instructions for power requirements.
17.Installation - Do not install the product in an unventilated rack, or directly above heat-producing equipment such as power amplifiers. Observe
the maximum ambient operating temperature listed below.
18.Power amplifiers- Never attach audio power amplifier outputs directly to any of the unit’s connectors.
19.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other
hazards.
20.Safety Check - Upon completion of any service or repairs to this MOTU product, ask the service technician to perform safety checks to
determine that the product is in safe operating conditions.
ENVIRONMENT, HEAT AND VENTILATION
Operating Temperature: 10°C to 40°C (50°F to 104°). The product should be situated away from heat sources or other equipment that produces
heat. When installing the product in a rack or any other location, be sure there is adequate space around the product to ensure proper ventilation.
Improper ventilation will cause overheating and can damage the unit.
TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE
Do not handle the power supply with wet hands. Do not pull on the power supply cord when disconnecting it from an AC wall outlet. Grasp it by
the plug. Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.
DC INPUT
10 - 24V DC • 1.0A max
III
Contents
Part 1: Getting Started
7
Quick Start Guide
9
UltraLite-mk4 Front Panel
10
UltraLite-mk4 Rear Panel
11
MOTU Pro Audio Control Web App
23
About the UltraLite-mk4
25
Packing List and System Requirements
27
Software Installation
31
Hardware Installation
Part 2: Using the UltraLite-mk4
39
Presets
43
The Front Panel LCD
45
Working with Host Audio Software
53
Mixer Effects
61
MOTU Audio Tools
Part 3: Appendices
79
Troubleshooting
81
Audio Specifications
83
Mixer Schematics
87
Updating Firmware
89
Auto-on Mode
91
Index

Specyfikacje produktu

Marka: Motu
Kategoria: DJ Gear
Model: UltraLite-mk4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Motu UltraLite-mk4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje DJ Gear Motu

Instrukcje DJ Gear

Najnowsze instrukcje dla DJ Gear

Mixars

Mixars Quattro Instrukcja

23 Września 2024
Mixars

Mixars Duo MKII Instrukcja

23 Września 2024
Mixars

Mixars Duo Instrukcja

23 Września 2024
ESI

ESI Xjam Instrukcja

22 Września 2024
DAP-Audio

DAP-Audio UBR-180BT Instrukcja

21 Września 2024
BeamZ

BeamZ StrobeDerby Instrukcja

20 Września 2024
Citronic

Citronic PD-1S MK2 Instrukcja

20 Września 2024
ANT

ANT B-Twig 12 Pro Instrukcja

20 Września 2024