Instrukcja obsługi Motorola MBP43S-4

Motorola Elektroniczna niania MBP43S-4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Motorola MBP43S-4 (28 stron) w kategorii Elektroniczna niania. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
User’s Guide
Digital Video Baby Monitor
Models: MBP43S, MBP43S-2, MBP43S-3, MBP43S-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing the Digital Video Baby Monitor. Now you can view
and hear your baby sleeping in another room or you can monitor your older
children in their play room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product-related questions, please call:
This User's Guide provides you with all the information you need to get the
most from your product.
Before you use the Digital Video Baby Monitor, we recommend that you
insert and fully charge the battery in the Parent Unit, so that it continues to
work if you disconnect it from the electrical outlet to carry it to another
location. Please read the Safety Instructions on pages 6 - 8 before you
install the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Rechargeable Ni-MH battery pack for the Parent Unit
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter for the Baby Unit
In packs with multi Baby Units, you will find one or more additional Baby
Units with power adapters.
US and Canada 1-888-331-3383
Email: support@motorolamonitors.com
Overview of the Parent Unit
1. LCD display
2. Up Key +
+
+
++
Normal Mode: Tilt Up
Menu Mode: Up
3. Down Key -
-
-
--
Normal Mode: Tilt Down
Menu Mode: Down
4. Left Key <
<
<
<<
Normal Mode: Pan Left
Menu Mode: Left
5. Right Key >
>
>
>>
Normal Mode: Pan Right
Menu Mode: Right
6. Menu Key M
M
M
MM
Press to open the Menu options.
7. OK Key O
O
O
OO
8. Video ON/OFF Key V
V
V
VV
Press to turn OFF the LCD display.
Press again to turn ON the LCD display.
9. Talk Key T
T
T
TT
Press and hold to speak to your baby.
10. Power Adapter / Battery LED
BLUE when the adapter is powered on.
RED when battery low.
11. Unit ON/OFF LED (Green)
12. Audio Level LED (Green, Orange, Red,
Red)
13. Microphone
14. Power Key P
P
P
PP
Press and Hold to switch the unit ON/
OFF.
15. Antenna
Lift up the antenna for optimal reception.
16. Battery cover
17. Stand
18. Speaker
19. USB power adapter socket
110 11 12 14
6
7
8
9
16
17
15
19
18
2
3
4
5
13
Parent unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
TTalk Mode
Battery Level Control (4 Levels)
Pan Left
Pan Right
Tilt Up
Tilt Down
Volume Level Control (8 Levels)
6 Safety Instructions
1. Safety Instructions
WARNING:
Strangulation Hazard. Children have
STRANGLED in cords. Keep this cord out
of the reach of children (more than 3ft
(1m) away). Never use extension cords
with AC Adapters. Only use the AC
Adapters provided.
Safety Instructions 7
ENGLISH
WARNING
This Digital Video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Digital Video Baby Monitor is not a substitute for responsible adult
supervision.
• Keep this user's guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Digital Video Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Digital Video Baby Monitor in damp areas or close to water.
• Do not install the Digital Video Baby Monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Only insert a battery pack of the same type.
BABY UNIT SET UP & USE:
• Choose a location for the Baby Unit that will provide the best view of
your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf,
or mount the Unit on a wall securely using the keyhole slots under the
stand.
• NEVER place the Baby Unit or cords within the crib.
• Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
8 Safety Instructions
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical outlets.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 900mAh.
Dispose of used batteries according to the instructions.
Getting Started 9
ENGLISH
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the DC plug of the power adapter to the DC jack at the bottom of
the Baby Unit and the other end to the electrical outlet.
NOTE
Only use the supplied power adapter (5V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position.
The power LED will light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2 Parent Unit Battery Installation
1. Insert the wire tabs of the rechargeable battery pack into the contact slots
as shown above and fit the battery pack into the compartment.
2. Place the battery compartment cover over the battery, making sure that
the battery wires are carefully pushed down and the cover fits properly.
DC JACK
DC PLUG
DC Jack
DC Plug
Red
Black
10 Getting Started
3. Gently tighten the screw in a clockwise direction using a small cross head
or flat end screwdriver.
2.3 Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event of a
power failure.
1. Connect the small plug of the power adapter to the Parent Unit and the
other end to the electrical outlet. Only use the supplied power adapter (5V
DC / 600mA) with the Micro USB plug.
2. Press and hold the P POWER ON/OFF button for 1 second to switch
ON the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the video display will be
replaced by a symbol and the unit will beep every 5 seconds. Move the
Parent Unit closer to the Baby Unit until the link is re-established.
Small cross head or flat
end screwdriver
Micro USB Plug
Micro USB Socket
Getting Started 11
ENGLISH
5. To turn off the Parent Unit, press and hold the P POWER ON/OFF
button until the progress bar finishes scrolling.
NOTE
The battery icon turns RED and the unit emits a beep every 16 seconds to
indicate that the battery is low and needs to be recharged. The battery pack
takes about 12 hours to charge fully.
When charging
1.
During charging, the battery icon at the top right of the screen indicates that it is
charging. If the Parent Unit is powered off while charging, a power plug icon is
displayed for 5 seconds, followed by a battery icon for 45 seconds. The Blue LED
at the top left corner lights up to indicate that the power adapter is plugged in.
2.4 Registration (Pairing)
The Baby Unit is pre-registered to your Parent Unit. You do not need to register
it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1. Press the M button of the Parent Unit and the menu bar will pop up.
2. Press the < > LEFT button or RIGHT button until is highlighted.
The
menu will pop up.
3. Press the + - UP button or DOWN button to select , and press the
O
O
O
OO button to confirm.
will pop up.
4. Press the + - UP button or DOWN button to select the desired Camera
and press the O
O
O
OO button to start searching for a camera unit. The green
audio level LED will flash rapidly while searching.
5. Press the O
O
O
OO button to confirm.
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby
Unit again will overwrite the old registration.
0

Specyfikacje produktu

Marka: Motorola
Kategoria: Elektroniczna niania
Model: MBP43S-4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Motorola MBP43S-4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Elektroniczna niania Motorola

Motorola

Motorola PIP1000 Connect Instrukcja

7 Stycznia 2025
Motorola

Motorola VM483 Instrukcja

7 Stycznia 2025
Motorola

Motorola MBP26 Instrukcja

3 Października 2024
Motorola

Motorola VM50G-2 Instrukcja

2 Października 2024
Motorola

Motorola PIP1510-2 CONNECT Instrukcja

2 Października 2024
Motorola

Motorola PIP1510 CONNECT Instrukcja

2 Października 2024
Motorola

Motorola PIP 1010 Connect Instrukcja

24 Września 2024
Motorola

Motorola EASE35 Instrukcja

24 Września 2024
Motorola

Motorola MBP161 Instrukcja

23 Września 2024
Motorola

Motorola MBP667 Instrukcja

23 Września 2024

Instrukcje Elektroniczna niania

Najnowsze instrukcje dla Elektroniczna niania

Alecto

Alecto DBX-72ECO Instrukcja

15 Stycznia 2025
ME

ME DBS-5 Instrukcja

15 Stycznia 2025
Uniden

Uniden BW 140R Instrukcja

15 Stycznia 2025
Lionelo

Lionelo Babyline 2.2 Instrukcja

15 Stycznia 2025
Alecto

Alecto DBX-98 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DVM 97 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto fr 66 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto fr 39 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DVM 95 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DBX-84 Babyfoon Instrukcja

13 Stycznia 2025