Instrukcja obsługi Morley ABC-Pro

Morley nieskategoryzowany ABC-Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Morley ABC-Pro (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
Set Up Example
THANK YOU FOR CHOOSING A MORLEY® SWITCH.
YOU NOW OWN THE BEST SWITCH MADE!
Please take a few minutes to familiarize yourself with the features of your new switch. With common sense handling, it will last for years.
We hope you enjoy using it as much as we enjoyed building it.
WARRANTY
All Morley® pedals are warranted for one year from date of purchase. There is no need to register your pedal for warranty. Simply retain your
original dated purchase receipt. To obtain warranty service, contact the store where purchased.
CONNECTIONS
9V: Use only Morley® 9 VDC 300 milliamp regulated adapter. Center Polarity is negative.
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
A, B & C JACKS: Connect amplifiers to these jacks using 1/4" guitar cables.
NOTE: You'll find cords fit very tightly into the 1/4” jacks. The tight fit helps prevent the cord from being accidentally unplugged. Make sure cords
are completely plugged in for best results.
AC ADAPTER
All Morley® pedals use Morley® 9VDC 300 milliamp regulated adapter. Center pin polarity is negative. Using a non-regulated adapter
could cause a low frequency hum in your amplifier. Using an adapter with the wrong polarity may damage the pedal.
BATTERY USE & REPLACEMENT
The ABC PRO is an active device, meaning it requires power to function. All Morley® pedals are designed to use one 9V battery or a 9V 300mA
Regulated Adapter. Battery access is on the bottom cover via our "Quick Clip" Battery door. We suggest you use a good quality alkaline battery.
To prolong battery life, unplug your cord completely from the IN jack when not using the pedal. When the pedal is not used for extended periods,
remove the battery from the pedal or replace it every six months to prevent leakage problems. Isolation Transformers like the one used in this
ABC PRO do tend to have a higher current draw so we recommend using an adapter whenever possible.
FEATURES:
Isolation Transformer: Channels B & C are equipped with 1:1 Isolation Transformers to prevent hum from electrical ground related issues and
to balance signal. This maintains tone and volume and allows use of longer cables.
Silent Switching: Gold Contact Relays are used to prevent any switch “pop” or “click”
Polarity Switch (Red Push Button): Flips signal polarity to fix phase cancellation which can cause loss of volume, tone or signal cancellation.
Ground Lift Switch (Black Push Button): Lifts signal ground to fix ground related noise. Overall ground reference remains intact.
Pro Design: No ground hum, no buzz, no switch noise, no crosstalk, no bleed and produces excellent signal integrity.
ABC PRO SELECTOR COMBINER INSTRUCTIONS
The ABC PRO was designed to route one input signal to three output paths (see Set Up Example). Use standard Mono (TS - Tip/Sleeve)
instrument cables. Plug Instrument into INPUT. Connect from ABC PRO Output A to amp #1. Connect from Output B to amp #2. Connect from
Output C to amp #3. Each of three switches turns on/off each output as labled. Use three amps individually or in any combination. LED’s show
which amp is on or off. Signal sound strange? Try pushing the Polarity Switch. Got ground hum or buzz? Try pushing the Ground Lift Switch.
IMPORTANT: DO NOT USE THE ABC PRO ON A
POWERED SPEAKER LINE! YOU WILL DAMAGE THE
ABC PRO, THE AMP AND/OR THE SPEAKER(S).
ABC PRO SPECIFICATIONS
POWER: 9V Battery or Morley 9V 300 mA Regulated Power
Supply (Center Negative)
LED INDICATORS: Channel switched on or off.
DIMENSIONS: 6.6" L x 4.5" W x 2.8" H
CURRENT DRAW: 95 mA

Specyfikacje produktu

Marka: Morley
Kategoria: nieskategoryzowany
Model: ABC-Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Morley ABC-Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Morley

Morley

Morley ABC-Pro Instrukcja

19 Czerwca 2024
Morley

Morley Hum Eliminator 2 Instrukcja

19 Czerwca 2024
Morley

Morley ABY Pro Selector Instrukcja

19 Czerwca 2024
Morley

Morley Hum Eliminator Instrukcja

19 Czerwca 2024
Morley

Morley 20/20 Power Instrukcja

19 Czerwca 2024
Morley

Morley 20/20 Classic Switchless Instrukcja

19 Czerwca 2024
Morley

Morley 20/20 Bad Horsie Instrukcja

19 Czerwca 2024
Morley

Morley ABY Mix Instrukcja

19 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024