Instrukcja obsługi MJX T20

MJX Zabawki T20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MJX T20 (6 stron) w kategorii Zabawki. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Ages 14+
INSTRUCTION
MANUAL
Introduction
Safety Guidelines
Thank you for purchasing this product, please read this manual carefully before use and
retain it for future reference.
1. Coaxical-rotor design, built-in gyro insure more stable performance and make the
operation more easier. It is the best choice for beginner.
2. By using of latest infrared auto connection techonology, up to two helicopters can
be operated simultaneously with high stability.
3. Double protection( overcurrent and low-voltage) features ensure the security
of flying and longer product life.
1. Please read this instruction manual carefully before playing and operate the product
according to the manual.
2. Keep the small accessories away from the kids to avoid accident.
3. Keep batteries away from fire or high temperature environment.
4. When flying the helicopter, keep it 1 ~ 2 meters away from user or others to avoid
injury due to collision.
5. Not to decompose or modify the product which may cause malfunction or accident.
6. Fly the helicopter within your eye vision for easy and safety control.
7. Need adult supervision when this helicopter is being played by children.
8. Only batteries of the same or equivalent type as recommended are to be used.
9. Insert batteries with correct polarity.
10. Non rechargeable batteries are not to be charged.
11. Do not mix old and new batteries.
12. Do not mix alkaline batteries, standard (Carbon-Zinc) or rechargeable (Nickel-
Cadmium) batteries.
13. Remove exhausted batteries from the battery compartment for the transmitter.
14. The power supply terminal are not to be short circuited.
15. Please retain this information for future reference.
16. Rechargeable batteries are to be removed from the toy before being charged(only for
AA type).
17. Rechargeable batteries are only to be charged under adult supervision.
Model No.: T20
Product / Spare Parts Included in This Packaging
TECHNICAL PARAMETER OF THE HELICOPTER
Sketch - major Parts and Function Switches
Helicopter Remote Control
Control Sticks
USB Charger Extra Tail Rotor
1
A12
Power
ON OFF
OPEN
A12
Power
ON OFF
OPEN
12Light indicator
Channel selector
Throttle control stick
Power switch Charging
compartment
Forward/backward/
left/right control stick
Gyro trim
Connector
Main Rotor Tail Rotor
Landing gear
Stabilizer bar
Charging
socket
Searchlight
Power switch
Fuselage Length:215mm Gross Weight: 45g Tail Rotor Diameter: 32mm
Battery: Li-Polymer 3.7v 200mA
Gear Ratio: 14:1 Charging Time: About 40min
Overall Height:106mm
Main Rotor Diameter: 206mm
Motor: 7.0 Coreless Motor
Charging the Helicopter
Flight Environment
Preparation for Flight
B. Connect the USB charger to the computer to charge the helicopter
●Connect the USB charger to the USB interface of the computer,
●Ensure that the helicoper is in a “OFF” power status, then, plug the
output jack of the USB cable into the charging socket of the
helicopter.(pic 6)
1. Indoor , stay away from unstable airflow generated by air conditioners or fans and without
table lamps or other dangerous objects.
2. Wide open space : Recommended minimum 3M ( wide ) x 5M ( length ) x 2.5M ( height )
3. Since this product is using of the infrared remote control technology, operating under
strong sun light or other any other light may cause lost of control.
Must set the remote control at the “OFF” position before operating.
1. Turn on the helicopter and the searchlight will keep flashing rapidly.After a few seconds, the
searchlight will turn to slowly blinking,indicating that the helicopter is ready to connect with
the remote control.
2
(1) There are two ways available to charge the helicopter.
A. Use the remote control to charge to helicoper
● Open the charger compartment on the remote control by sliding
down the cover.
● Ensure the helicopter is in a “OFF” power status.
Connect the USB charger to the USB interface of the remote
control. Plug the output jack of the USB cable into the charging
socket of the helicopter. Then, charging is beginning.(pic 5)
(2) The light of the remote control/USB charger is off when charging
is proceeding and will turn on automatically when charging is
done. Fully charge takes approximately 40 minutes.
Pic. 6
Pic. 5
Battery Installation
1. Install the control sticks.(Pic.1)
2. Unscrew counter clockwise to open the battery compartment cover.( Pic. 2 )
3. Install 4 X AA batteries into the battery compartment according to the given polarity. ( Pic. 3 )
4. Screw clockwise to close the battery compartment. (Pic. 4 )
Pic. 1 Pic. 2 Pic. 3 Pic. 4
How to remove and insert batteries.
A12
Power
ON OFF
OPEN


Specyfikacje produktu

Marka: MJX
Kategoria: Zabawki
Model: T20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MJX T20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zabawki MJX

MJX

MJX F639 Instrukcja

7 Kwietnia 2025
MJX

MJX F48 Instrukcja

6 Kwietnia 2025
MJX

MJX T653 Instrukcja

4 Kwietnia 2025
MJX

MJX T11 Instrukcja

4 Kwietnia 2025
MJX

MJX T43 Instrukcja

9 Marca 2025
MJX

MJX X705C Instrukcja

7 Lutego 2025
MJX

MJX T643 Instrukcja

1 Lutego 2025
MJX

MJX F648 Instrukcja

17 Stycznia 2025
MJX

MJX T20 Instrukcja

17 Stycznia 2025
MJX

MJX F39 Instrukcja

17 Stycznia 2025

Instrukcje Zabawki

Najnowsze instrukcje dla Zabawki