Instrukcja obsługi Mitsubishi P93DE
Mitsubishi
Printer
P93DE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mitsubishi P93DE (37 stron) w kategorii Printer. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/37
This digital monochrome printer complies with the requirements of the EC Directive 89/
336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper
operation in residential areas, on business and light industrial premises and on small-
scale enterprises, inside as well as outside of the buildings. All places of operation are
characterised by their connection to the public low voltage power supply system.
DIGITAL MONOCHROME PRINTER
MODEL
P93DW
P93DE
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL MONOCHROME PRINTER.
DIGITAL MONOCHROME
PRINTER
OPEN
COPY
FEEDLOCKUPDOWN
BRT/CONT
BRT
CONT
LOCK
FOR THE MODEL P91DW(UB) ONLY
WARNING:
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1.
Case 1. Connect to the 120V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital
Grade plug.
Case 2. Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and NEMA 6-15 type, 250V 10A or higher rating, Hospital
Grade plug.
Case 3. Connect to the 120V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and IEC320-2.2/E type, 125V 10A or higher rating plug.
Case 4. Connect to the 230V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and IEC320-2.2/E type, 250V 10A or higher rating plug.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his or her own expense.
Information:
This class A digital apparatus complies with Canadian ICES-003.
"CLASSIFIED BY UNDERWRITERS LABORATORIES INC.®
WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/CSA C22.2 No. 601.1"
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The “Caution, hot surface” symbol indicates that the marked item may be hot
and should not be touched.
The “ON/OFF” symbol indicates connection to or disconnection from the mains,
at least for mains switches.
The “Equipotentiality” symbol identifies the terminals connected each other. The
potential of various parts of equipment or of a system is equalized.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
RISK OF ELECTRIC SHOCK DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR
BACK)
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
When you dispose of the unit or accessories, you must obey the law in the relative area
or country and/or regulation in the relative hospital.
Specyfikacje produktu
Marka: | Mitsubishi |
Kategoria: | Printer |
Model: | P93DE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Mitsubishi P93DE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Printer Mitsubishi
6 Października 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Printer
- Printer Sony
- Printer Samsung
- Printer Sharp
- Printer Epson
- Printer Roland
- Printer Panasonic
- Printer Canon
- Printer Fujifilm
- Printer Toshiba
- Printer Citizen
- Printer HP
- Printer Brother
- Printer Honeywell
- Printer Kodak
- Printer Primera
- Printer Xerox
- Printer Godex
- Printer Olivetti
- Printer Zebra
- Printer Dell
- Printer Digitus
- Printer Kyocera
- Printer Ricoh
- Printer Seiko
- Printer Thomson
- Printer Panduit
- Printer Olympus
- Printer OKI
- Printer Intermec
- Printer NEC
- Printer Polaroid
- Printer Konica Minolta
- Printer Bixolon
- Printer Pantum
- Printer Datamax O'Neil
- Printer DNP
- Printer TSC
- Printer HiTi
- Printer Triumph-Adler
- Printer Lexmark
- Printer Sagem
- Printer Nilox
- Printer Royal Sovereign
- Printer Oce
- Printer Paxar
- Printer IDP
- Printer Metapace
- Printer Ultimaker
- Printer Toshiba TEC
- Printer Frama
- Printer Star Micronics
- Printer Posiflex
- Printer Dascom
- Printer EC Line
- Printer Tally Dascom
- Printer Custom
Najnowsze instrukcje dla Printer
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024