Instrukcja obsługi Mitsubishi CP9600DW

Mitsubishi drukarka CP9600DW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mitsubishi CP9600DW (25 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/25

DIGITAL COLOR PRINTER

MODEL

CP9600DW

OPERATION MANUAL

THIS OPERATION MANUAL IS IMPORTANT

TO YOU.

PLEASE READ IT BEFORE USING YOUR

DIGITAL COLOR PRINTER.

POWER

ALARM

PAPER/INK RIBBON

DATA

READY COOLING

CAN C EL

DO O R O PEN FEED & C U T

Hereby, Mitsubishi Electric Corporation, declares that this digital color printer is in

compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.

This digital color printer complies with the requirements of the EC Directive 89/336/EEC,

73/23/EEC, 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation

in residential areas, on business and light industrial premises and on small-scale

enterprises, inside as well as outside of the buildings. All places of operation are

characterised by their connection to the public low voltage power supply system.

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

INFORMATION

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

CAUTION :

TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute the risk of

electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and

should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble

(including equipment malfunction) due to static electricity may occur in certain

conditions.

The “ON/OFF” symbol indicates connection to or disconnection from the mains,

at least for mains switches.

The “Alternating current” symbol indicates that the equipment is suitable for

alternating current only.

CAUTION

CONNECTIONS OTHERS

PRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his or her own expense.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

WARNING:

In the USA or Canada, use the AC power cord according to the recommen-

dations as below, in order to comply with UL60950-1 and CAN/CSA C22.2

No. 60950-1-03.

Connect to the 120V receptacle of the room or the host equipment.

The AC power cord should be UL or CSA approved and consist of type SVT,

size 16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type,

125V 10A or higher rating connector and NEMA 5-15 type, 125V 10A or

higher rating plug.

WARNING:

In Europe, use the AC power cord according to the recommendations as

below, in order to comply with EN60950-1.

Connect to the 230V receptacle of the room or the host equipment.

The AC power cord should be VDE approved and consist of core size 1mm

or bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250V 10A

or higher rating connector and CEE(7)VII type, 250V 10A or higher rating

plug.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and compo-

nents which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of

separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product.

Please, help us to conserve the environment we live in!

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.

WARNING:

The socket outlet shall be installed near the equipment and shall be easily accessible.

Specyfikacje produktu

Marka:	Mitsubishi
Kategoria:	drukarka
Model:	CP9600DW
Waga produktu:	17000 g
Port USB:	Tak
Pojemność pamięci wewnętrznej:	32 MB
Liczba portów USB 2.0:	1
Diody LED:	Tak
Maksymalna rozdzielczość:	300 x 600 DPI
Technologia druku:	termosublimacjyjny
Wymiary produktu (SxGxW):	300 x 365 x 325 mm
Zasilanie:	AC 220-240V, 50-60Hz
Pozycjonowanie na rynku:	Biznes
Typ zasilacza:	Prąd przemienny
Typy nośników podajnika papieru:	Papier fotograficzny
Rozmiary papieru fotograficznego:	4x6, 5x7 "