Instrukcja obsługi MIPRO MR-90B

MIPRO odbiornik MR-90B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MIPRO MR-90B (9 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/9
User Guide
Wireless ENG Receiver
MR-90a/MR-90B
MR-90a/MR-90B
MR-90a/MR-90B
MR-90a/MR-90BMR-90a/MR-90B
2 CE 4 4 4 B
Specifications and design subject to change without notice. MN 014/11
All rights reserved. Do not copy or forward without prior approvals MIPRO.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarised or ground
plug: A polarised plug has two blades with one wider than the
other. The wide blade is provided for your safety. When the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plug, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
Moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
16. Apparatus should not be exposed to dripping or splashing and
no objects filled with liquids, should be placed on the
apparatus.
17. Use only with the battery which specified by manufacturer.
18. The power supply cord set is to be the main disconnected
device.
! IMPORTANT SAFETY INSTRUCTIONS !
Dispose of any unusable devices or batteries responsibly
and in accordance with any applicable regulations.
Disposing of used batteries with domestic waste is to be
avoided!
Batteries / NiCad cells often contain heavy metals such as
cadmium(Cd), mercury(Hg) and lead(Pb) that makes
them unsuitable for disposal with domestic waste. You
may return spent batteries/ accumulators free of charge
to recycling centres or anywhere else
batteries/accumulators are sold.
By doing so, you contribute to the conservation of our
environment!
Disposal
20
20
20
202005
05
05
0505-0
-0
-0
-0-08
8
8
88-1
-1
-1
-1-13
3
3
33
WARNING
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
1. FOR OUTDOOR USE:
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
2. UNDER WET LOCATION:
Apparatus should not be exposed to dripping or splashing and no
objects filled with liquids, such as vases should be placed on the
apparatus.
3. SERVICE INSTRUCTIONS:
CAUTION - These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
THIS DEVICE COMPLIES WITH PART74 OF THE FCC RULES AND
RSS-123 ISSUE2 OF CANADA. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device. This equipment
complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
& IC - ID
The MIPRO MR-90a/MR-90B is a wireless,
receiver specifically designed for professional camcorder
applications. Matched with any ACT transmitter the —
MR-90a/MR-90B eliminates the need for microphone
cables during recording. The MR-90a/MR-90B not only —
allows a closer combination of video and audio so that a
more natural sound can be recorded, but it also ensures
safer and more agile operation.
portable
- 2 -- 1 -
The can also be installed on an
active PA speaker via its accessories and matched with
MIPRO's MA-909 Wireless Audio Mixer to form a wireless
inter-linking amplifier system. Alternatively, the
can be matched with any of the ACT-series
wireless transmitter microphones to turn active speakers
into wireless amplifiers.
MR-90a/MR-90B
MR-90a/
MR-90B
For professional camcorder
Mount on any active
speaker via velcro fasteners
Introduction PART NAMES AND FUNCTIONS
1. To Install SMA soft antenna.Antenna Connector:
2. Display operating functions.LCD Panel:
3. Protects .Weatherproof Case:
4. Compatible with SONY D-SUB 15PIN Socket:
BETACAM pre-adjusted signal transmission socket.
5. Audio . Connector:
6. 12V-DC power socketDC Power Input Socket:
.
internal circuitry
®
Mini XLR output connector
,
positive center
1
1
1
11
2
2
2
22
3
3
3
33
4
4
4
44
5
5
5
55
6
6
6
66
Mounts onto SONY's BETACAM
camcorders
®For camcorders and powered
PA speakers without built-in
power socket.
A
RF
AF
B
BT
A
RF
AF
B
BT
2
5
5
5
55
2
2
2
22
3
3
3
33
1
1
1
11
6
6
6
66
4
4
4
44
Wireless ENG ReceiverWireless ENG Receiver

Specyfikacje produktu

Marka: MIPRO
Kategoria: odbiornik
Model: MR-90B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MIPRO MR-90B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik MIPRO

MIPRO

MIPRO MR-90B Instrukcja

30 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024