Instrukcja obsługi Milwaukee M28 0730-22
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M28 0730-22 (32 stron) w kategorii piła. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
To reduce The risk of injury, user musT read and undersTand operaTor's
manual.
afin de réduire le risque de blessures, l'uTilisaTeur doiT lire eT bien
comprendre le manuel de l'uTilisaTeur.
para reducir el riesgo de lesiones, el usuario debe leer y enTender el
manual del operador.
Cat. No.
No de cat.
0730-20
28 VOLT CIRCULAR SAw
SCIE CIRCULAIRE 28 V
SIERRA CIRCULAR DE 28V
2
3
GENERAL POWER TOOL SAFETY WARNINGS
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to
follow the warnings and instructions may result in electric shock, re and/or serious injury. Save
all warnings and instructions for future reference. The term “power tool” in the warn-
ings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
BATTERY TOOL USE AND CARE
PERSONAL SAFETY
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools. Such preven-
tive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
• Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of re
when used with another battery pack.
• Use power tools only with specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and re.
Specyfikacje produktu
| Marka: | Milwaukee |
| Kategoria: | piła |
| Model: | M28 0730-22 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee M28 0730-22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piła Milwaukee
23 Sierpnia 2024
16 Czerwca 2024
27 Maja 2024
20 Maja 2024
Instrukcje piła
- piła AEG
- piła Worx
- piła Stihl
- piła Bosch
- piła Parkside
- piła Stiga
- piła Festool
- piła Bavaria By Einhell
- piła Stanley
- piła Black & Decker
- piła Scheppach
- piła Proxxon
- piła Ford
- piła Lider
- piła Hazet
- piła DeWalt
- piła Einhell
- piła Remington
- piła Silverline
- piła Husqvarna
- piła Makita
- piła Ozito
- piła Rona
- piła Fuxtec
- piła RYOBI
- piła Handy
- piła DEDRA
- piła Baumr-AG
- piła Sovereign
- piła Kraftixx
- piła Trotec
- piła Dremel
- piła Meec Tools
- piła Güde
- piła Texas
- piła Bavaria
- piła Zipper
- piła Florabest
- piła Solo
- piła Ferrex
- piła McKenzie
- piła Westfalia
- piła Ferm
- piła Hitachi
- piła Łucznik
- piła Craftsman
- piła Fieldmann
- piła Shindaiwa
- piła PowerPlus
- piła Alpha Tools
- piła Vonroc
- piła Spear & Jackson
- piła HiKOKI
- piła Workzone
- piła Proviel
- piła Porter-Cable
- piła Masport
- piła Metabo
- piła Cotech
- piła Skil
- piła Maestro
- piła Extralink
- piła Cocraft
- piła NAX
- piła PRIME3
- piła Snow Joe
- piła Greenworks
- piła Yellow Garden Line
- piła Ideal
- piła Wolfcraft
- piła Challenge
- piła Powerworks
- piła Kinzo
- piła Gamma
- piła Kress
- piła Varo
- piła Batavia
- piła Protool
- piła Elu
- piła Lux Tools
- piła Triton
- piła Fleurelle
- piła Evolution
- piła Dual Saw
- piła Elektra Beckum
- piła Toolson
- piła Dexter Power
- piła Toledo
- piła Graule
- piła Exakt
- piła Mac Allister
Najnowsze instrukcje dla piła
24 Października 2024
22 Października 2024
22 Października 2024
22 Października 2024
22 Października 2024
15 Października 2024
15 Października 2024
6 Października 2024
6 Października 2024
5 Października 2024