Instrukcja obsługi Milwaukee M18 Fuel 2746-21CT

Milwaukee Zszywacz M18 Fuel 2746-21CT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M18 Fuel 2746-21CT (20 stron) w kategorii Zszywacz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Cat. No. / No de cat.

2746-20

M18 FUEL™ 18GA BRAD NAILER

CLOUEUSE M18 FUEL™ 18GA BRAD

M18 FUEL™ 18GA BRAD CLAVADORA

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specifica-

tions provided with this power tool. Failure to follow

all instructions listed below may result in electric shock,

re and/or serious injury. Save all warnings and in-

structions for future reference. The term "power tool"

in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs

and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

• Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn

it on and o󰀨. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

• Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may a󰀨ect

the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations di󰀨erent

from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a re.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or mod-

ied. Damaged or modied batteries may exhibit unpre-

dictable behavior resulting in re, explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging im

properly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

NAILER SAFETY WARNINGS

• Always assume that the tool contains fasteners.

Careless handling of the nailer can result in unexpected

ring of fasteners and personal injury.

• Do not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the fas

tener causing an injury.

• Do not actuate the tool unless the tool is placed

rmly against the workpiece. If the tool is not in con

tact with the workpiece, the fastener may be deﬂected

away from your target.

• Disconnect the tool from the power source when

the fastener jams in the tool. While removing a

jammed fastener, the nailer may be accidentally acti-

vated if it is plugged in.

• Use caution while removing a jammed fastener.

The mechanism may be under compression and the

fastener may be forcefully discharged while attempting

to free a jammed condition.

• Do not use this nailer for fastening electrical

cables. It is not designed for electric cable installa

tion and may damage the insulation of electric cables

thereby causing electric shock or re hazards.

•Prior to each use, check workpiece contact and

trigger for correct operation. Do not disassemble or

clamp parts of the workpiece contact, trigger, or driv-

ing mechanism. This will cause unexpected actuation,

resulting in serious injury.

•Do not engage in horseplay. The discharged fasten

ers are projectiles capable of causing serious injury.

•Do not remove, tamper with, or otherwise cause the

tool operating controls to become inoperable. This will

cause unexpected actuation, resulting in serious injury.

•Do not operate a tool if any portion of the tool oper-

ating controls is inoperable, disconnected, altered,

or not working properly. This will cause unexpected

actuation, resulting in serious injury.

•Always keep hands and body away from discharge

area of the tool. Never attempt to clear a jammed

workpiece contact by grasping the discharge area of

the tool. Fasteners discharged from tool can cause

serious injury if they contact hands or body.

•Do not drive fasteners close to the edge of the

workpiece. Fasteners can slip o󰀨 corners and edges

or penetrate through thin material, making them pro-

jectiles capable of causing serious injury.

•Use the tool only for the intended purpose. Do not

abuse the tool. Do not use as a hammer, stamp or en

grave information onto parts, drop or impact the tool or

otherwise apply excess force to the tool in use. Do not

mount the tool to stands or modify it for stationary use.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

Single Sequential Actuation

Contact (Bump) Actuation

Read Operator's Manual

Wear Eye Protection

Keep Hands Away

C US

UL Listing for Canada and U.S.

SPECIFICATIONS

Volts 18 DC..............................................................

Battery Type .................................................M18™

Charger Type M18™................................................

Recommended Ambient

Operating Temperature ......................0°F to 125°F

Fastener Length .... 5/8" – 2-1/8" (16 mm – 54 mm)

Collation Angle.....................................................

0°

Fastener Size (Diameter) ...................18 GA / 1.2 mm

Magazine Capacity ........................................110 nails

Specyfikacje produktu

Marka:	Milwaukee
Kategoria:	Zszywacz
Model:	M18 Fuel 2746-21CT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee M18 Fuel 2746-21CT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zszywacz Milwaukee

Milwaukee M18 FN18GS Instrukcja

4 Października 2024

Milwaukee 2742-21CT Instrukcja

25 Września 2024

Milwaukee 2744-21 Instrukcja

25 Września 2024

Milwaukee 2741-21CT Instrukcja

25 Września 2024

Milwaukee M18 Fuel 2741-21CT Instrukcja

14 Września 2024

Milwaukee M18 Fuel 2746-21CT Instrukcja

8 Września 2024

Milwaukee M18 Fuel 2843-22 Instrukcja

8 Września 2024

Milwaukee M12 2540-21 Instrukcja

3 Września 2024

Milwaukee M18 FUEL 2744-21 Instrukcja

30 Sierpnia 2024

Milwaukee M18 FUEL 2745-21 Instrukcja

22 Sierpnia 2024

Instrukcje Zszywacz

Najnowsze instrukcje dla Zszywacz

Sun Joe BDL-A0202 Instrukcja

7 Grudnia 2024

Whirlpool YWEE515S0LB Instrukcja

4 Grudnia 2024

Whirlpool YWEE515S0LV Instrukcja

4 Grudnia 2024

MSW -STAPLER 1500 Instrukcja

15 Października 2024

RYOBI P322 Instrukcja

7 Października 2024

RYOBI P318 Instrukcja

7 Października 2024

RYOBI P317 Instrukcja

7 Października 2024

RYOBI P739 Instrukcja

7 Października 2024

RYOBI P330 Instrukcja

7 Października 2024

RYOBI P360 Instrukcja

7 Października 2024