Instrukcja obsługi Milwaukee HL2-LED

Milwaukee Flesz HL2-LED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee HL2-LED (5 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
HL2-LED
Original instructions
2
1
2
3
4
+
+
+
Type AAA
-
-
-
1.
1
2
click
4
HL2-LED
............................. 3,5 W
................................ 4 h
............................. 8,5 h
.............................. 28 h
............................ 350 lm
............................ 150 lm
.............................. 25 lm
.............................. 80
.......................... 4000 K
............................. 4,5 V (3x1,5V)
................LR03 / AAA
............................. 0,1 kg
...............................IP 52
TECHNICAL DATA BATTERY LAMP
Rated Power input .............................................................................
Lighting time
Mode 1 High Level .........................................................................
Mode 2 Med Level ..........................................................................
Mode 3 Low Level ..........................................................................
Luminus ux
Mode 1 High Level .........................................................................
Mode 2 Med Level ..........................................................................
Mode 3 Low Level ..........................................................................
Colour rendering index (CRI).............................................................
Colour temperature............................................................................
Battery voltage...................................................................................
Battery type .......................................................................................
Weight according EPTA-Procedure 01/2014 .....................................
Protection class .................................................................................
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting
the machine.
Do not stare at the operating light source.
This tool is only suitable for indoor use. Never expose
tool to rain.
Class III electrical protection.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY LAMP
Warning: Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not even from
a distance). Staring into the light beam may result in serious
injury or vision loss.
Don‘t use this tool in wet areas .
The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
SAFETY INSTRUCTIONS BATTERY
This tool is designed to be powered by 3 LR03 / AAA
batteries properly inserted into the instrument. Do not
attempt to use with any other voltage or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or
types within brands) of batteries.
Do not mix rechargeable and non-rechargeable batteries.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive uids, such as
seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The headlight is intended to be used light independent use
away from mains supply. The headlight is especially
designed for head mounting.
Do not use this product in any other way as stated for
normal use.
LOW BATTERY INDICATION
The light will fl ash three times when the battery voltage is
low. In this case pleas change batteries.
MAINTENANCE
The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
ENGLISH


Specyfikacje produktu

Marka: Milwaukee
Kategoria: Flesz
Model: HL2-LED

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee HL2-LED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Flesz Milwaukee

Milwaukee

Milwaukee L4 FL2000 Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 NL400 Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 SL550 Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 BOLTHL Instrukcja

4 Października 2024
Milwaukee

Milwaukee HL2-LED Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 FFL Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 FMLED Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 PWL Instrukcja

4 Października 2024
Milwaukee

Milwaukee L4 TMLED Instrukcja

4 Października 2024
Milwaukee

Milwaukee 2104 Instrukcja

16 Września 2024

Instrukcje Flesz

Najnowsze instrukcje dla Flesz

Nedis

Nedis LHLR05WBK Instrukcja

14 Stycznia 2025
Nedis

Nedis LHLR10WBK Instrukcja

14 Stycznia 2025
Ledlenser

Ledlenser iH8R Instrukcja

31 Grudnia 2025
Nitecore

Nitecore MT21C Instrukcja

29 Grudnia 2024
Nitecore

Nitecore Thumb Instrukcja

29 Grudnia 2024
Nitecore

Nitecore GEM10 Instrukcja

29 Grudnia 2024
Nitecore

Nitecore EC4GTS Instrukcja

29 Grudnia 2024
Nitecore

Nitecore MT42 Instrukcja

29 Grudnia 2024
Nitecore

Nitecore P16TAC Instrukcja

29 Grudnia 2024