Instrukcja obsługi Milwaukee 48-35-1311
Milwaukee
Laserowa woda
48-35-1311
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 48-35-1311 (1 stron) w kategorii Laserowa woda. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1

BULLETIN NO.
54-07-3545
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 -------------- Steel Strap (16)
2 -------------- Magnet (8)
3 -------------- M3 x 7mm T10 FH Screw (8)
4 -------------- Friction Magnet (2)
5 44-26-0140 Right Magnet Assembly (4)
6 -------------- M3 x 16mm T10 PH ST Screw (1)
7 -------------- Back Plate (1)
8 31-10-0045 Back Plate Kit (1)
9 44-26-0135 Left Magnet Assembly (4)
CATALOG NO. 48-35-1311
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
360 Laser Mount
STARTING
SERIAL NO.
DATE
Aug. 2020
WIRING INSTRUCTION
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
6
1
(x16)
7
3
(x8)
4
(x2)
2
(x8)
84 6
7
51 2
3
91 2
3
MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, Wisc. 53005
Drwg. 1
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2). Inspect sticker applied to the face of the Magnet (2).
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the Orient the Magnet and Steel Strap (1) so that the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the "N/S" faces in the upward direction relative to the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the tool. The left (L) is inserted into the left side of the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the bracket and the right (R) magnet is inserted into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the right side. Insert the Magnet and Steel Strap into the
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter mount so that the post aligns with the inner diameter
on the magnet.
on the magnet.
on the magnet.
on the magnet. After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is on the magnet. After the Magnet and Steel Strap is
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed inserted into the mount, the sticker can be removed
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not and the screws (4) can be hand tightened. Do not
over tighten.
over tighten.
over tighten.
over tighten.over tighten.
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet Assemblies (5)
Assemblies (5)
Assemblies (5)
Assemblies (5) 2 additional sets of Left (L) Magnet Assemblies (5)
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located and Right (R) Magnet assemblies (9) are located
here.
here.
here.
here.here.
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw In order to remove the Back Plate (7), remove Screw
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate (6). The screw will act like a stop so the back plate
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.does not come o with misuse.
**
Specyfikacje produktu
Marka: | Milwaukee |
Kategoria: | Laserowa woda |
Model: | 48-35-1311 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee 48-35-1311, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Laserowa woda Milwaukee

3 Października 2024

7 Września 2024

24 Sierpnia 2024

21 Sierpnia 2024
Instrukcje Laserowa woda
- Laserowa woda Leica
- Laserowa woda Bosch
- Laserowa woda Toolcraft
- Laserowa woda DeWalt
- Laserowa woda Einhell
- Laserowa woda Silverline
- Laserowa woda Makita
- Laserowa woda Ozito
- Laserowa woda Hilti
- Laserowa woda Fluke
- Laserowa woda Brandson
- Laserowa woda Stabila
- Laserowa woda Craftsman
- Laserowa woda Klein Tools
- Laserowa woda Alpha Tools
- Laserowa woda Steinberg
- Laserowa woda Laserliner
- Laserowa woda Bruder Mannesmann
- Laserowa woda Neo
- Laserowa woda PLS
- Laserowa woda Futech
Najnowsze instrukcje dla Laserowa woda

13 Marca 2025

5 Stycznia 2025

5 Stycznia 2025

5 Stycznia 2025

3 Stycznia 2025

3 Stycznia 2025

18 Grudnia 2024

18 Grudnia 2024

16 Grudnia 2024

16 Grudnia 2024