Instrukcja obsługi Milwaukee 2447-20
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 2447-20 (11 stron) w kategorii Zszywacz. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/11
Cat. No. / No de cat.
2447-20
M12™ 3/8" CROWN STAPLER
AGRAFEUSE À COURONNE LARGE DE 10 MM (3/8") M12™
ENGRAPADORA DE CORONA DE 10 MM (3/8”) M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
4
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
• Always assume that the tool contains fasteners.
Careless handling of the stapler can result in unex-
pected ring of fasteners and personal injury.
• Do not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge the fas-
tener causing an injury.
• Do not actuate the tool unless the tool is placed
rmly against the workpiece. If the tool is not in con-
tact with the workpiece, the fastener may be deflected
away from your target.
• Disconnect the tool from the power source when
the fastener jams in the tool. While removing a
jammed fastener, the tool may be accidentally activated
if it is plugged in.
• Use caution while removing a jammed fastener.
The mechanism may be under compression and the
fastener may be forcefully discharged while attempting
to free a jammed condition.
• Do not use this tool for fastening electrical cables.
It is not designed for electric cable installation and
may damage the insulation of electric cables thereby
causing electric shock or re hazards.
• Use only those fasteners specifically recom-
mended. Fasteners not identied for use with this tool
by the tool manufacturer may result in a risk of injury
to persons or damage to the tool.
•Prior to each use, check workpiece contact and
trigger for correct operation. Do not disassemble or
clamp parts of the workpiece contact, trigger, or driv-
ing mechanism. This will cause unexpected actuation,
resulting in serious injury.
•Do not engage in horseplay. The discharged fasten-
ers are projectiles capable of causing serious injury.
•Do not remove, tamper with, or otherwise cause
the tool operating controls to become inoperable.
This will cause unexpected actuation, resulting in
serious injury.
•Do not operate a tool if any portion of the tool oper-
ating controls is inoperable, disconnected, altered,
or not working properly. This will cause unexpected
actuation, resulting in serious injury.
•Always keep hands and body away from discharge
area of the tool. Never attempt to clear a jammed
workpiece contact by grasping the discharge area of
the tool. Fasteners discharged from tool can cause
serious injury if they contact hands or body.
•Do not drive fasteners close to the edge of the
workpiece. Fasteners can slip off corners and edges
or penetrate through thin material, making them pro-
jectiles capable of causing serious injury.
•Use the tool only for the intended purpose. Do not
abuse the tool. Do not use as a hammer, stamp or en-
grave information onto parts, drop or impact the tool or
otherwise apply excess force to the tool in use. Do not
mount the tool to stands or modify it for stationary use.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Read Operator's Manual
WARNING Risk of electric shock. Do
not use near electrical wires
Always wear eye protection
WARNING Keep hands away
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Specyfikacje produktu
| Marka: | Milwaukee |
| Kategoria: | Zszywacz |
| Model: | 2447-20 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee 2447-20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zszywacz Milwaukee
4 Października 2024
25 Września 2024
25 Września 2024
25 Września 2024
14 Września 2024
8 Września 2024
8 Września 2024
3 Września 2024
22 Sierpnia 2024
21 Sierpnia 2024
Instrukcje Zszywacz
- Zszywacz Fellowes
- Zszywacz President
- Zszywacz Bosch
- Zszywacz Parkside
- Zszywacz Whirlpool
- Zszywacz DeWalt
- Zszywacz Einhell
- Zszywacz Silverline
- Zszywacz Makita
- Zszywacz Rapid
- Zszywacz RYOBI
- Zszywacz DEDRA
- Zszywacz Güde
- Zszywacz CTA Digital
- Zszywacz Rexel
- Zszywacz Hitachi
- Zszywacz Rapoo
- Zszywacz Craftsman
- Zszywacz Klein Tools
- Zszywacz Fieldmann
- Zszywacz PowerPlus
- Zszywacz Sencor
- Zszywacz Powerfix
- Zszywacz HiKOKI
- Zszywacz Workzone
- Zszywacz Porter-Cable
- Zszywacz Metabo
- Zszywacz Proline
- Zszywacz Targus
- Zszywacz Sun Joe
- Zszywacz Kensington
- Zszywacz Meister
- Zszywacz Aqua Joe
- Zszywacz Iluv
- Zszywacz Holzmann
- Zszywacz Surtek
- Zszywacz POWERNAIL
- Zszywacz Werckmann
- Zszywacz Neo
- Zszywacz Syscom
- Zszywacz MSW
- Zszywacz Mannesmann
- Zszywacz Smart365
Najnowsze instrukcje dla Zszywacz
15 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
6 Października 2024
6 Października 2024
4 Października 2024