Instrukcja obsługi Milesight MS-N7016UH

Milesight magnetowid MS-N7016UH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milesight MS-N7016UH (32 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
1
F
Network Video Recorder
User Manual
V3.06
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. The precaution measures are divided into “Warnings”
and “Cautions”
Warnings: Serious injury or death may be caused if any of these warnings is
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings: Please follow these safeguards to
prevent injury or death.
Cautions: Please follow these safeguards to
prevent potential injury or material damage.
Warnings
This installation must be conducted by a qualified service person and should
strictly comply with the electrical safety regulations of the local region
To avoid risk of fire and electric shock, do keep the product away from rain
and moisture
Do not touch components such as heat sinks, power regulators, and
processors, which may be hot
Source with DC 12V or PoE
Please make sure the plug is firmly inserted into the power socket
When the product is installed on a wall or ceiling, the device should be firmly
fixed
If the product does not work properly, please contact your dealer. Never
attempt to disassemble the camera by yourself
Cautions
Make sure that the power supply voltage is correct before using the camera
Do not store or install the device in extremely hot or cold temperatures,
dusty or damp locations, and do not expose it to high electromagnetic
radiation
Only use components and parts recommended by manufacturer
Do not drop the camera or subject it to physical shock
To prevent heat accumulation, do not block air circulation around the
camera
Laser beams may damage image sensors. The surface of image sensors
should not be exposed to where a laser beam equipment is used
Use a blower to remove dust from the lens cover
Use a soft, dry cloth to clean the surface of the camera. Stubborn stains can
be removed using a soft cloth dampened with a small quantity of detergent
solution, then wipe dry
Do not use volatile solvents such as alcohol, benzene or thinners as they may
damage the surface finishes
Save the package to ensure availability of shipping containers for future
transportation
EU Conformity Statement
2012/19/EU (WEEE directive): Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
indicate cadmium (Cd), lead (Pb), or mercury(Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information
see: www.recyclethis.info.


Specyfikacje produktu

Marka: Milesight
Kategoria: magnetowid
Model: MS-N7016UH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milesight MS-N7016UH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje magnetowid Milesight

Milesight

Milesight MS-N7016UH Instrukcja

4 Października 2024

Instrukcje magnetowid

Najnowsze instrukcje dla magnetowid

Hikvision

Hikvision DS-7104NI-Q1 Instrukcja

15 Października 2024
Hitachi

Hitachi VT-F494A Instrukcja

10 Października 2024
DataVideo

DataVideo HDR-2 Instrukcja

9 Października 2024
Reolink

Reolink NVS8 Instrukcja

7 Października 2024
Synology

Synology DVA1622 Instrukcja

7 Października 2024
Motorola

Motorola MTN162K0021 Instrukcja

7 Października 2024