Instrukcja obsługi Midland LXT490


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Midland LXT490 (2 stron) w kategorii walkie talkie. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
OWNER'S MANUAL
GMRS/FRS Radio
Welcome to the world of Midland electronics
Congratulations on your purchase of a high quality MIDLAND
product. Your 2-way radio represents the state-of-the-art in high-tech
engineering. Designed for GMRS (General Mobile Radio Service)
operation, this compact package is big in performance. It is a quality
piece of electronic equipment, skillfully constructed with the finest
components. The circuitry is all solid-state and mounted on a rugged
printed circuit board. Your two-way radio is designed for reliable and
trouble-free performance for years to come.
Features
- 36 GMRS/FRS Channel
- 121 Privacy Codes (38 CTCSS / 83 DCS)
- VOX
- Selectable CALL Alert
- NOAA Weather Scan
- NOAA Weather Radio
- NOAA Weather Alert
- SCAN Function
- MONITOR Function
- Roger Beep Tone
- Silent Operation
- Key Pad Lock
- Power High / Low Settings
- Speaker / Microphone Jacks
- Battery Meter / Battery Low Indicator
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) this device does not cause
harmful interference, and (2) this radio must accept any interference
that may cause undesired operation.
To maintain compliance with FCC’s RF exposure guidelines, for
body-worn operation, this radio has been tested and meets the FCC RF
exposure guidelines when used with Midland Radio Corp. accessories
supplied or designated for this product. Use of other accessories may
not ensure compliance with FCC RF exposure guidelines.
IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION
(Only Applicable for GMRS Radio Use in the United States)
The LXT490 Series operates on GMRS (General Mobile Radio Service)
frequencies which require an FCC (Federal Communications Commission)
license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22,
which comprise the GMRS channels of the LXT490 Series. Serious penalties
could result for unlicensed use of GMRS channels, in violation of FCC rules, as
stipulated in the Communications Act's Sections 501 and 502 (amended).
You will be issued a call sign by the FCC which should be used for station
identification when operating the radio on GMRS channels. You should also
cooperate by engaging in permissible transmissions only, avoiding channel
interference with other GMRS users, and being prudent with the length of their
transmission time.
To obtain a license or ask questions about the license application, contact the
FCC at 1-888-CALL FCC or go to the FCC's website:
http://www
.fcc.gov 605and request form .
Exposure To Radio Frequency Energy
Your Midland radio is designed to comply with the following national and
international standards and guidelines regarding exposure of human being to
radio frequency electromagnetic energy:
- United States Federal Communications Commission, Code of Federal
Regulations: 47 CFR part 2 sub-part J
- American National Standards Institute (ANSI)/Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-1992
- Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition
- National Council on Radiation Protection and Measurements (NCRP) of the
United States, Report 86, 1986
- International Commission on Non-lonizing Radiation Protection (ICNIRP)
1998
To control your exposure and ensure compliance with the general population or
uncontrolled environment exposure limits, transmit no more than 50% of the
time. The radio generates measurable RF energy exposure only when
transmitting.
IMPORTANT: Changes or modifications to this unit not expressly
approved by MIDLAND RADIO CORP. could void your right to operate
this unit. Your radio is set up to transmit a regulated signal on an
assigned frequency. It is against the law to alter or adjust the settings
inside the COMMUNICATOR to exceed those limitations. Any adjustment
to your radio must be made by qualified technicians.
LCD DISPLAY
1. KEY LOCK ICON Indicates KEY
LOCK mode is on.
2. VOX ICON Indicates when VOX mode
is active.
3. NOAA WEATHER (WX) BAND ICON
Indicates when the radio is in Weather
Band mode.
4. CHANNEL NUMBER Changes from
1~36 on GMRS/FRS band (1~10 on WX
band).
5. PRIVACY CODE – Indicates Privacy
Code selected by user (oF~38/oF~83). It
can only be set in Ch1~22.
6. BATTERY METER – Indicates the battery
level.
7. RECEIVE (RX) ICON – Indicates radio is
receiving a transmission.
8. TRANSMIT (TX) ICON – Indicates radio
is transmitting a signal.
9. TRANSMIT POWER LEVEL ICON
Indicates TX Power setting (H/L)
10. PRIVACY CODE ICON Indicates
Privacy Code setting (CTCSS/DCS).
1
CONTROLS
11. PTT Button – Press and hold to
transmit voice communication.
12. CALL/LOCK Button Press to send a
CALL Alert signal. Press and hold to
turn KEY LOCK on/off.
13. MIC Built-in microphone.
14. SPEAKER Built-in speaker.
15. ANTENNA.
16. EXTERNAL SPEAKER/MIC/CHG.
JACK
17. POWER / MENU Button – Press and
hold for at least 3 seconds to turn the
radio on/off. Press momentarily to
access Menu mode.
18. MONITOR/SCAN Button – Press to
enter SCAN mode. Press and hold to
enter MONITOR mode
19. UP/WX SCAN sand DOWN t
Button – Make adjustments in MENU
mode. Press and hold the UP button for
5 seconds to activate the NOAA
Weather Scan function.
18
17
16
14
13
12
11
7
6
3
2
15
19
4
5
8
9
10
BATTERY INSTALLATION
Your LXT490 Series radio operates with either 4 AAA alkaline
batteries or an optional NiMH battery pack. The belt clip should be
removed (see below) to ease installation or removal of the batteries.
To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see
diagram below) for easy access, then remove the Battery Cover by
pressing down on the top center and sliding it down from the radio.
2. Insert 4 AAA batteries observing the polarity as shown. Installing
the batteries incorrectly will prevent the unit from operating or may
damage the unit.
3. Return the Battery Cover by sliding it up on the radio. Replace the
belt clip, making sure it locks into place.
BATTERY
COMPARTMENT
BATTERY
COMPARTMENT
COVER
Press here and
push down to open
BELT CLIP
LOCK TAB
BELT CLIP
LATCH
INSTALLING THE BELT CLIP
To install the BELT CLIP, slide the clip up into the slot on the back of
the radio until the BELT CLIP LATCH clicks. To remove the BELT
CLIP LOCK TAB, press the up, then gently pull the belt clip down
toward the bottom of the radio.
MIDLAND RADIO CORPORATION
5900 Parretta Drive
Kansas City, MO 64120
Call 816.241.8500
visit us at http://www.midlandradio.com
Note: Features & Specifications are subject to change without
notice. MIDLAND is not responsible for unintentional errors or
omissions on its packaging.
Your LXT490 Series is equipped for using an optional rechargeable
NiMH battery pack which can be recharged by inserting the AC
adapter into the radio charge jack, or with optional desktop charger
(as described below). Initial charge time is 24 hours. Charge time is
about 12 hours thereafter. For maximum battery life, we recommend
charging the battery pack when the low battery icon comes on.
Remove the radios from the charger when the charge time expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with color will light up, indicating charging function.RED
In order to ensure that the battery pack is fully charged, it is
recommended that the battery pack be charged for at least 12
hours with the radio turned OFF.
1. Only use our NiMH battery pack.
2. Do not attempt to charge alkaline batteries or any batteries
or battery packs other than the one indicated in the
manual. This may cause leakage and damage to the radio.
3. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.
BATTERY LEVEL INDICATOR
Your LXT490 Series has a BATTERY LEVEL METER that
shows the battery power level. The greater the number of bars
visible, the stronger the battery level. When the battery level is low,
the icon will flash in the display indicatingBattery Shell
your batteries should be replaced or recharged if using a recharge-
able battery pack.
CHARGING THE OPTIONAL BATTERY PACK
!
POWER ON/OFF AND VOLUME
Press the button for at least 3 seconds to turn thePOWER/MENU
radio on/off. During Power On, the radio will beep 2 times with
different tones, the LCD will display all icons for 1 second and the
LCD display will indicate the last channel selected.
To increase/decrease the volume level, press the s\tbutton during
RX STANDBYor mode.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel and/or Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your
mouth.
2. Press and hold the button and speak in a normal voice PTT
into the . The icon will appear continuously microphone TX
on the LCD Display while transmitting.
3. To receive a call, release the button. The icon will PTT RX
appear on the display when your radio is receiving a transmis-
sion.
ABOUT RANGE
Your LXT Series radios are designed to give you maximum range
under optimum conditions.
Optimum Conditions are:
lOver water
lOpen rural areas without obstructions
lFlat areas where you can see the other person
To ensure you get maximum range:
lBe sure to use fresh or fully charged batteries - low batteries will
cause low power conditions
lBe sure you are on a GMRS channel - FRS channels are
restricted by the FCC to low power
lBe sure to set your radio to use Hi power.
OPERATING YOUR RADIO LXT490 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the button for 3 seconds will letMONITOR
you hear noise so you can adjust the volume level of the radio when
not receiving a signal. This could also be used to check any activity
on your current channel before transmitting.
Press and hold the button for 3 seconds again to get outMONITOR
of mode.MONITOR
SCAN
Your LXT490 Series can scan all 36 channels for activity. To enter,
quickly press the button. Repeat the same procedure to exit.SCAN
Your radio will rapidly scan each of the 36 channels and stop on any
active channel for 4 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the button.SCAN
CALL ALERT
Your LXT490 Series can transmit a call alert for a fixed length of time.
To send a call alert, press the button. The icon will appearCALL TX
while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 4 seconds. The KEY LOCK icon will appear on the display.
PTT CALLand will still be active. Repeat the same procedure to
unlock the keypad.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the button once, and then the MENU s\tbuttons to select
one of the 36 GMRS/FRS channels. To confirm the selection, press
the button or press the button again to move to the nextPTT MENU
feature setting.
MENU Channel VOX
1~36
Privacy Roger Beep
On/Off
Power
H/L
Call Alert
1~5
WX Channel
1~10
Silent Operation
On/Off
oF/1/2/3
CTCSS
DCS
oF~38
oF~83
WX Alert
On/Off
WX Scan
1~10
Press and hold UP/WX
butt on f or 5 seconds
!
SETTING PRIVACY CODES
Your LXT490 Series has 121 available to use inPrivacy Codes
channels 1~22. The selected may be different for eachPrivacy Code
channel. To select a for the current channel press thePrivacy Code
MENU button twice, and then the s\tbuttons to select one of the
38 Privacy Code. Press again the button and theCTCSS MENU
s\t button to select one of the 83 Privacy Code. TheDCS
Privacy Code icon on the display will indicate whether you set your
Privacy Code in or mode. To confirm the selection,CTCSS DCS
press the button or press button again to move to thePTT MENU
next feature setting.
Note : If you select any Privacy Code, any pre-selected CTCSS
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of will disable the Privacy feature." "oF
To communicate between two LXT490 Series radios, all radios in
your group must be set to the same channel and/or Privacy Code
selections. The Privacy Code can only be set in channels
1~22.
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT490 has 2 power level settings. To select the power level on
channels 1~7 and 15~36, press the MENU button until a ” icon willPr
appear blinking on the display. Then press the s\tbuttons to select
TRANSMIT POWER LEVEL (H: /L: )icon Hi Lo . To confirm, press the
PTT MENUbutton or press button again to move to the next feature
setting. When the PTT button is pressed during Low Battery
Level condition, the TX Power will automatically switch from
Hi(H) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
VOX
Your LXT490 Series has 3 VOX level settings: .(oF/1/2/3)
To set VOX, press the button until the display shows MENU VOX
blinking while on the right of the display, anCHANNEL NUMBER
” icon appears. Select “ ”, ” or ” by pressing the oF 1 2 3 s\tbuttons
and push the key, or press button again to move to thePTT MENU
next feature setting.
!
VOX will be more sensitive on the setting than on the setting.“ ”1 3
To turn offVOX , press the button until the display showsMENU
” blinking while on the right of the display,VOX CHANNEL NUMBER
a ”,“ ” or “ ” icon appears. Select “ by pressing the 1 2 3 oF s\t
buttons and push the key, or press button again to movePTT MENU
to the next feature setting.
ROGER BEEP (end of transmission) TONE
When the button is released, the radio will beep to confirm toPTT
other users that your transmission has finished.
To turn the tone on, press the button until theROGER BEEP MENU
display shows an “ icon while on the right of the “ ” display, anrb rb
icon appears. Select by pressing the oF on s\tbuttons and
push the key, or press button to move to the next featurePTT MENU
setting.
To turn the tone off, press the button until theROGER BEEP MENU
display shows an “ icon while on the right of the “ ” display, anrb rb
icon appears. Select by pressing the on oF s\tbuttons and
push the key, or press button to move to the next featurePTT MENU
setting.
CALL ALERT SELECTION
Your LXT490 Series has 5 selectable CALL ALERTS.
To select, press the button until a “ icon appears and toMENU CA
the right of the “ icon the current setting isCA CALL ALERT
displayed. Then press the s\tbuttons to make the CALL ALERT
selections - the radio will emit a corresponding tone for each
selection. To confirm, press the button or press button toPTT MENU
move to the next feature setting.
SILENT OPERATION
Your LXT490 Series has a SILENT OPERATION mode. In this mode,
all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the buttonMENU
until the display shows an icon while on the right of the bP bP
display, an ” icon appears. Select “ by pressing the on oF s\t
buttons and push the key or button.PTT MENU
To turn the SILENT OPERATION mode off, press the buttonMENU
until the display shows an icon while on the right of the bP bP
display, an ” icon appears. Select “ by pressing the oF on s\t
buttons and push the key or button.PTT MENU
NOAA WEATHER RADIO/SCAN
Your LXT490 Series has a function, toNOAA WEATHER RADIO
enable user to receive weather reports from designated NOAA
stations.
Your LXT490 Series also has a NOAA WEATHER SCAN function, to
enable user to scan all the 10 channels of the NOAA WEATHER
RADIO. To turn the NOAA WEATHER SCAN on, press and hold the
UP/WX sbutton for 5 seconds while in GMRS mode. The radio will
go to WX Band mode and start scanning all the 10 channels and stop
on any active channel. When the channel becomes inactive for 10
seconds the radio will resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the , press the button during WX Band MENU NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current channel setting and the WX Band WX Band
icon. While on WX Band mode press the s\tbuttons to select one
of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press
the button or press button to move to the next featurePTT MENU
setting.
To turn the NOAA WEATHER RADIO PTT off, press the button. The
current radio setting will be displayed and the GMRS/FRS WX BAND
icon will go off.
NOAA WEATHER ALERT
Your LXT490 has a function, to enableNOAA WEATHER ALERT
you to automatically receive weather alert from designated NOAA
stations.
The NOAA WEATHER (WX) ALERT is automatically on during
NOAA WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT NOAAon during normal
WEATHER RADIO MENUmode, press the button twice while in
NOAA WEATHER SCAN mode. The display shows , while on"AL"
the right an icon appears blinking. Select by pressing the"oF" "on"
s\t buttons.
To confirm, press the button or press . The radio willPTT MENU
return to and the will continue blinking. IfWX BAND WX BAND icon
the radio receives a WX ALERT signal from a designated sta-NOAA
tion while on GMRS/FRS Radio mode, the radio will beep for 10 sec-
onds while an and icon appear on the display, after which"AL" "In"
will automatically go to .WX BAND
If any button is pressed during beeping while on GMRS/FRS Radio
mode, the radio will automatically go to .WX BAND
To turn the NOAA WEATHER (WX) ALERT MENUoff, press the
button twice while in . The display shows , while onWX Band "AL"
the right an icon appears blinking. Select by pressing the"on" "oF"
s\t buttons. To confirm, press the button or press .PTT MENU
Note : The WX Alert is automatically ON during WX SCAN
mode.
EXTERNAL SPEAKER/MICROPHONE JACK
Your LXT490 Series can be used with an optional external speaker/
microphone or headset, freeing your hands for other tasks. To use an
optional speaker / microphone or headset:
l Insert the plug(s) into the jacksSPK/MIC
l Place the earbud into your ear, and adjust the
mic into your desired position.
Note : You can charge a rechargeable NiMH
battery pack thru the CHG Jack.
!
PROBLEM SOLUTION
No Power - Check battery installation and/or replace batteries
Cannot Receive
Messages
- Confirm the radios have the same channel
settings.
- Make sure that you are within range of the other
transceivers.
- Buildings and other structures may interfere with
your communication.
Radio is not responding
to button presses
- Make sure key lock is not on. See "Keypad Lock"
- Radio might need to be reset. Turn radio off then
on.
Display is dim - Recharge or replace batteries.
Charger not functioning - Contacts on the bottom of the radio may require
cleaning.
- Ensure the outlet where the charger is plugged
into is functioning properly.
- Check that the battery pack is installed in the radio
properly.
USE AND CARE
1. Use a soft damp cloth to clean the radio
2. use alcohol or cleaning solutions to clean the radio.Do not
3. immerse the radio in water.Do not
4. Dry the radio with dry lint-free cloth should it get wet.
5. Turn off the radio and remove the batteries during long-term
storage.
If you have a problem which you believe requires
service, please call first and speak with a service
technician. Many problems can be remedied over the
phone without returning the unit for service.
TROUBLESHOOTING GUIDE SPECIFICATIONS
Channels 36 GMRS/FRS Channels +121 Privacy Codes
10 NOAA Weather (WX) Band Channels
Operating Frequency UHF 462.5500 ~ 467.7125 MHz
Power Source 4 AAA Alkaline or 4.8V Rechargeable Ni-MH
battery pack
GMRS/FRS FREQUENCY CHART (MHz)
CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq.
1462.5625
2462.5875
3462.6125
11 467.6375
4462.6375
12 467.6625
5462.6625
13 467.6875
21 462.7000
6462.6875
14 467.7125
22 462.7250
7462.7125
15 462.5500
8467.5625
16 462.5750
9467.5875
10 467.6125
17 462.6000
18 462.6250
23
24
25
26
27
28
19 462.6500
20 462.6750
29
30
31
32
33
34
35
36
NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)
CH. No CH. Freq. CH. No CH. Freq.
1162.550 6162.500
2162.400 7162.525
3162.475 8161.650
4162.425 9161.775
5162.450 10 163.275
PRIVACY CODES FREQUENCY CHART (Hz)
Code Freq. Code Freq. Code Freq. Code Freq. Code Freq.
1 67.0 9 91.5 17 118.8 25 156.7 33 210.7
2 71.9 10 94.8 18 123.0 26 162.2 34 218.1
3 74.4 11 97.4 19 127.3 27 167.9 35 225.7
4 77.0 12 100.0 20 131.8 28 173.8 36 233.6
5 79.7 13 103.5 21 136.5 29 179.9 37 241.8
6 82.5 14 107.2 22 141.3 30 186.2 38 250.3
7 85.4 15 110.9 23 146.2 31 192.8
8 88.5 16 114.8 24 151.4 32 203.5
* Channel 8,9 and 10 are designated Canadian Marine Frequencies
* Channels 8~14 are low-power FRS license free channels
Note: Privacy codes can be programmed for use on Channels 1~22 only
DCS PRIVACY CODE CHART
No.
CODE No. CODE No. CODE
1 023 29 174 57 445
2 025 30 205 58 464
3 026 31 223 59 465
4 031 32 226 60 4 66
5 032 33 243 61 503
6 043 34 244 62 506
7 047 35 245 63 516
8 051 36 251 64 532
9 054 37 261 65 546
10 0 65 38 263 66 565
11 0 71 39 265 67 606
12 0 72 40 271 68 612
13 0 73 41 306 69 624
14 0 74 42 311 70 627
15 1 14 43 315 71 631
16 1 15 44 331 72 632
17 1 16 45 343 73 654
18 1 25 46 346 74 662
19 1 31 47 351 75 664
20 1 32 48 364 76 703
21 1 34 49 365 77 712
22 1 43 50 371 78 723
23 1 52 51 411 79 731
24 1 55 52 412 80 732
25 1 56 53 413 81 734
26 1 62 54 423 82 743
27 1 65 55 431 83 754
28 1 72 56 432 - -
Note: Privacy codes can be programmed for use on Channels 1~22 only
LIMITED WARRANTY
Midland Radio Corporation will repair or replace, at its option without
charge, any Midland FRS/GMRS transceiver which fails due to a
defect in material or workmanship within Three Years following the
initial consumer purchase.
This warranty does not apply to water damage, battery leak or abuse.
Accessories have a 90 day warranty from date of purchase, including
any antennas, chargers, or earphones.
This warranty does not include the cost of labor for removal or
re-installation of the product in a vehicle or other mounting.
For Product Purchased in the USA:
Performance of any obligation under this warranty may be obtained
by returning the warranted product, prepaid freight, along with proof
of purchase to:
Midland Radio Corporation
Warranty Service Department
5900 Parretta Drive
Kansas City, MO 64120
This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Note : The above warranty applies only to merchandise purchased in
the United States of America or any of the territories or possessions
thereof, or from a U.S. Military exchange.
For Product Purchased in Canada:
Performance of any obligation under this warranty may be obtained
by returning the warranted product, along with proof of purchase to
your dealer in Canada.
This warranty gives you specified legal rights. Additional warranty
rights may be provided by law in some areas.
- 1 Open Face
Helmet
Microphone Kit
- $49.99
- 1 Closed Face
Helmet
Microphone Kit
- $49.99
- 2 Over the Ear
Mic. Headsets
w/ PTT
- $19.99
ACCESSORIES
Accessories can be purchased at or fill inwww.midlandradio.com
the form on the following page and mail it to our address.
- 2 Surveillance
Headset
- $39.99
- 2 Behind the
Head Headset
- $39.99
- 2 Ear Wrap
Headset
- $39.99
- 2 Mossy Oak
Around the Ear
Headsets with
Boom Mic
- $39.99
- 1 Action Throat
Mic with
Acoustic Ear
Tube
- $39.99
Please send Money Order or fill in Visa/MasterCard information and
mail to the address below. Please send cash or checks.DO NOT
Make Money Order to Midland Radio Corporation.
Name: _____________________________________________________
Address: ___________________________________________________
City: _____________________ State Zip Code __________________
Tel: email: _________________________________________________
CC# Type: Exp. _________________________________ __________
ACCESSORIES ORDER FORM
Mail To:
Midland Radio Corporation
Consumer Dept.
5900 Parretta Drive
Kansas City, MO 64120
----------------
Or Call 816.241.8500.
----------------
To order online go to
www.midlandradio.com
Sub-Total ___________
Tax (MO, CO, IL, FL only) ___________
S & H _____ $14.95
(Applies to Domestic U.S. only.
For Hawaii, Alaska, and Puerto
Rico S&H will be $36.25 for 1lb
and $64.25 for 2lbs or more).
Total $___________
Qty Item Price Total
AVP-1 $19.99
AVP-H1 $49.99
AVP-H2 $49.99
AVP-H3 $39.99
AVP-H4 $39.99
AVP-H5 $39.99
AVP-H7 $39.99
AVP-H8 $39.99
AVP-6 $39.99
TH1 $39.99
TH2 $99.99
TH3 $29.99
TH4 $199.99
TH1 TH2
TH3 TH4
AVP-6
- Earphone Mic
with Boom
- $39.99
- Earphone Mic
with PTT
- $29.99
- Tactical Action
Boom Mic with
Tactical PTT
- $99.99
- Action Throat
Mic with
Tactical PTT
and Pneumatic
Earphone
- $199.99
- 1 Dual Desk
Charger
- 2 Rechargeable
battery packs
- 1 AC Adapter
- 1 DC Cigarette
lighter adapter
- $39.99
TACTICAL HEADSETS


Specyfikacje produktu

Marka: Midland
Kategoria: walkie talkie
Model: LXT490

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Midland LXT490, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje walkie talkie Midland

Midland

Midland LXT490 Instrukcja

14 Października 2024
Midland

Midland BT Ski Instrukcja

21 Września 2024
Midland

Midland G11V Instrukcja

14 Września 2024
Midland

Midland BT Sport Instrukcja

4 Września 2024
Midland

Midland 220 Instrukcja

31 Sierpnia 2024
Midland

Midland G5 XT Instrukcja

29 Sierpnia 2024
Midland

Midland BR03 Instrukcja

28 Sierpnia 2024
Midland

Midland 777 Pro Instrukcja

23 Sierpnia 2024

Instrukcje walkie talkie

Najnowsze instrukcje dla walkie talkie

SilverCrest

SilverCrest SPMR 8000 A1 Instrukcja

13 Października 2024
GoGen

GoGen BOB VYSILACKY Instrukcja

9 Października 2024
Motorola

Motorola Mag One BPR40 Instrukcja

9 Października 2024
BaoFeng

BaoFeng UV-82 Instrukcja

8 Października 2024
Motorola

Motorola Talkabout T72 Instrukcja

7 Października 2024
Yaesu

Yaesu VX-2R Instrukcja

7 Października 2024
Yaesu

Yaesu FT-4XR Instrukcja

7 Października 2024
Yaesu

Yaesu FT-1500M Instrukcja

7 Października 2024
Yaesu

Yaesu FT-4VR Instrukcja

7 Października 2024
Yaesu

Yaesu FTM-100DR Instrukcja

7 Października 2024