Instrukcja obsługi Metra JP-1018

Metra Speaker JP-1018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra JP-1018 (16 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 202 METRA ELECTRONICS CORPORATION 4
I N S TA L L AT I O N I N S T R U C T I O N S
J -101P 8
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory r adio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
• Driver and passenger specific lower dash grilles
Cut templates and hardware
ABS injection molded, silver painted surround
Metal stamped grille insert
Used with OE or JP-1014 speaker upgrade dash pods
1 year warranty from defects
KIT COMPONENTS
• A) B) Template (Left & Right) Cut-in grilles (Left & Right) • C) Backing plates (Left & Right)
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
7mm and 13mm socket
TABLE OF CONTENTS
Left dash Disassembly ...................................... 2-3
Dash cut-in...................................................................4-5
Passenger side Disassembly....................... ...... 6-7
Jeep Wrangler (JL) 2018-2023,
Jeep Gladiator 2020-2 302
Visit for more detailed information about the product and up-to-date MetraOnline.com
vehicle specific applications
KIT FEATURES
ACB
REV. 1/17/2024 1
Dash cut-in...................................................... .................8
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the panel below the
steering column. Remove (2) Phillips
screw exposed. (Figures A,B)
2. Unclip, unplug, and remove the climate
control panel. (Figure C)
(Figure D)
(Figure E)
3. Remove (2) Phillips screws securing
the radio trim panel, then unclip and
remove. (Figure D)
4. Remove (1) Phillips screw securing the
dash pad, then unclip and remove.
(Figure E)
(Figure A)
(Figure B)
(Figure C)
REV. INSTJP-10181/17/2024 3
DASH DISASSEMBLY
5.Remove (8) Phillips screws securing the
instrument panel on the left side, and
airbag panel on the right side.
(Figure F, G)
6.Unclip the steering column shroud then
set aside. (Figure H)
Driver’s side removal:
7.Open the drivers door, then unclip and
remove the panel on the side of the
dash. Remove (5) Phillips screws
exposed. (Figure I)
8.Remove (5) Phillips screws securing
the speaker panel, then unclip and
remove. (Figure J)
(Figure I)
(Figure F)
(Figure G)
(Figure H) (Figure J)
Tip
Tip
Tip
TipTip:
:
:
: : Now would be an excellent time to install
a pair of JP-1014 6.5" speaker pods. For more
information scan the QR code below.

Specyfikacje produktu

Marka: Metra
Kategoria: Speaker
Model: JP-1018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra JP-1018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Metra

Metra

Metra BC-HDLFP Instrukcja

9 Października 2024
Metra

Metra JP-1018 Instrukcja

9 Października 2024

Instrukcje Speaker

Najnowsze instrukcje dla Speaker

Polk

Polk Signature Elite ES50 Instrukcja

10 Października 2024
QTX

QTX PAL15 Instrukcja

10 Października 2024
LG

LG LF-D5938S Instrukcja

9 Października 2024
LG

LG MD9600DV Instrukcja

9 Października 2024
LG

LG LF-D6335 Instrukcja

9 Października 2024
LG

LG LM-D5531S Instrukcja

9 Października 2024
Edifier

Edifier MR3 Instrukcja

9 Października 2024
Meridian

Meridian DSP730 Instrukcja

9 Października 2024
Meridian

Meridian DSW.2 Instrukcja

9 Października 2024
Turbosound

Turbosound TS-PC15B-1 Instrukcja

9 Października 2024