Instrukcja obsługi Metra 99-9230G


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 99-9230G (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
REV. 5/1/2017 INST99-9230G
INSTALLATION INSTRUCTIONS FOR PART 99-9230G
METRA – The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted gray to match factory finish
A) Radio trim panel • B) Radio housing C) Pocket • D) (4) #8 x 3/8” Phillips screws E) (4) Panel clips
20;-,(;<9,:
20;*64765,5;:
Panel removal tool Phillips screwdriver
T-25 Torx driver
;663:9,8<09,+
Volvo S80 1999-2006
99-9230G
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
A B C D E
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: 70-9221 • 70-9223 (amplified models)
Antenna Adapter:40-VL10
99-9230G
2
Dash Disassembly
1. Unsnap the gear shifter trim panel.
(Figure A)
2. Unsnap the gear shifter boot to
separate it from the gear shifter
trim panel and remove the trim
panel. (Figure B)
3. Remove (2) T-25 Torx head
screws from bottom of the climate
controls. (Figure C)
4. Unsnap the climate controls from
bottom edge of the radio. Unplug
and remove the climate controls.
(Figure D)
5. Remove (2) T-25 Torx head screws
from bottom of the radio. Unplug
and remove the radio. (Figure E)
Continue to Kit Assembly
(Figure C)
(Figure A) (Figure D)
12
VOLT
AUTO
ON AC OFF 64
68 72 76
80 64
68 72 76
80
(Figure B) (Figure E)
12
VOLT
99-9230G
3
Kit Assembly
ISO DIN radio provision with pocket
1. Secure the pocket radio housing to the
using (4) #8 x 3/8” Phillips screws provided.
(Figure A)
Note: Rounded edge of pocket faces
towards the bottom.
2. Remove the metal DIN sleeve and trim ring
from the aftermarket radio.
3. Slide the radio into the completed assembly,
and then secure it to the assembly using
screws supplied with the radio. (Figure A)
4. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
5. Reassemble the dash in reverse order
of disassembly.
6. Attach (4) panel clips supplied to the radio
trim panel, and then snap the panel over
the radio.
ISO DDIN radio provision
1. Slide the radio into the radio housing and
secure it using screws supplied with the
radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
3. Reassemble the dash in reverse order of
disassembly.
4. Attach (4) panel clips supplied to the
radio trim panel, and then snap the panel
over the radio.
(Figure A) (Figure A)


Specyfikacje produktu

Marka: Metra
Kategoria: Nie skategoryzowane
Model: 99-9230G

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra 99-9230G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Metra

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane