Instrukcja obsługi Mercury AMD04


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mercury AMD04 (3 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
www.avsl.com 1 .030 User Manual 30 UK
4G Ready VHF/UHF
Distribution Amplifiers
AMD02/04/06/08
Item ref:
130.030/031/032/033 UK
User Manual
A range of Distribution amplifiers with built in 4G LTE filter, designed to improve the quality of audio
and video by amplifying weak VHF/UHF signals and distributing them across a designated area.
Suitable for both professional and domestic installations and fully compatible with Digital
Terrestrial/Satellite/Cable TV and DAB/FM radio signals.
Features:
Fully screened amplifier compatible with Digital Terrestrial/Satellite/Cable TV and DAB/FM
radio signals
Integrated LTE signal filter avoids interference and channel loss from 4G mobile signals
Coaxial socket connection, F socket adaptors included to allow F-Type connection
Built in low noise amplifier with wideband output
Built in surge protection LED lights when a power surge is detected
Short circuit protection LED illuminates when short circuit is detected on an output a
Maximum output limiter prevents overload
High gain output for additional distribution connection
Separate inputs for VHF and UHF
DC pass allows the control of satellite via Magic Eye remote extender (124.157)
Side mounted terminals allow easy cable management
CAUTI ON
Please read through this manual carefully before use. This
product is strictly for indoor use only and must be kept in dry a
and cool environment and out of reach from children and pets.
www.avsl.com 1 .030 User Manual 30 UK
Specifications:
AMD02
AMD04
AMD06
AMD08
No of inputs
2
2
2
2
No of outputs
2+Full
4+Full
6+Full
8+Full
Frequency
response
47-230MHz,
470-790MHz
47-230MHz,
470-790MHz
47-230MHz,
470-790MHz
47-230MHz,
470-790MHz
Max output level
94dBµV
90dBµV
87dBµV
87dBµV
Gain per split
12dB
8dB
8dB
8dB
Gain on Full
20dB
20dB
20dB
20dB
Noise
<4dB
<4dB
<4dB
<4dB
Isolation loss
22dB
22dB
22dB
22dB
Dimension
134.5 x 70 x
44.4mm
179.5 x 70 x
44.4mm
224.5 x 70
x 44.4mm
269.5 x 70
x 44.4mm
Weight
270g
350g
420g
500g
I tallation: ns
Before installation please ensure all devices to be connect to the amplifier are switched off and ed
disconnected from the mains. The unit is designed to be connected via coaxial connectors although f-,
type adaptors also supplied for additional compatibility. the back of the cas there are also are On ing
two mount holes which allow the unit to be ing fixed wall.to the
AV: distribution amplifiers designed to amplify weak, poor quality signals and distribute theLink are m
to different destinations. For installations that close to TV transmitter or any other form of radio are a
transmitter or high-power source, may experience blocking or frozen picture In this instance you a .
an attenuator required for rning down the signal to suitable levels for TV viewing. is tu
www.avsl.com 1 .030 User Manual 30 UK
The abo diagram shows AMD08 receiving TV signals from the Satellite receiver and FM/DAB aerial ve
and distribute the signals to 4 individual hi-fi an TV units. The AMD series amplifier is designed d 4
with DC pass function. All 4 TV can also be set up with s a “Magic eye” (remote extension unit) to
allow remote control of the s ellite receiver when the TV is not the same room This can only be at .
done whe connect the RF2 output to the UHF input of the amplifier. only one satellite n you Note:
channel can be viewed at any time from the Satellite receiver.
It is also suitable for upgr or replac existing UHF/VHF signal distribution units, simpading ing ly
reconnect the existing connector from the previous unit to the AMD amplifier Ensure the UHF aerial is .
connected to the UHF input of the amplifier and FM/DAB aerials are connected to the VHF input of the
amplifier. For loft distribution installation please ensure the unit is kept away from moisture and water.
Safety warnings:
Do not use this appliance it is damaged in any way. if
Do not attempt to repair this appliance or take apart under any circumstances, as this will invalidate
your warran . ty
Do not use this appliance for anything other than its intended purpose, and do not use outdoors.
Use only a damp cloth to clean the surface of the appliance and never attempt to clean while it is on
or still hot.
Please ensure you have read these instructions thoroughly before first use and keep them for future
reference.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the
end of its useful life. The goods must be dispos according to your local council guidelines.ed of
Errors and omissions excepted.
Copyright© 21 AVSL Group Ltd20 , Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork Ireland. ,


Specyfikacje produktu

Marka: Mercury
Kategoria: odbiornik
Model: AMD04

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mercury AMD04, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Mercury

Mercury

Mercury AMD04 Instrukcja

13 Września 2024
Mercury

Mercury AMD08 Instrukcja

10 Września 2024
Mercury

Mercury AMD06 Instrukcja

8 Września 2024
Mercury

Mercury AMD02 Instrukcja

6 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024