Instrukcja obsługi Mean Well GC120A24-R7B

Mean Well Ładowarka baterii GC120A24-R7B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mean Well GC120A24-R7B (4 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
GC120
Instruction Manual
GC120 Instruction Manual
1
PIN NO.
1,4
2,3
DC output connector (standard)
AD1 (optional)
R7B
(KYCON KPP-4S or equivalent)
OUTPUT
+V
-V
23
14
DC output connector (optional)
[ housing: Anderson 1327FP(red), 1327G6FP(black)
contacts: Anderson 261G2 (45A) or equivalent ]
AD1
Red(+V) Black(-V)
Asse mbly Procedure :
1.Ma ke sure the charge r is shut off and choosin g suitab le wires to connect th e charg er and batteries based o n the rat ing of charging
curr ent. The po larity must be correct: c ha rger outp ut (+) should be co nnected to the (+) terminal of ba tt eries a nd charger ou tput (- )
should be conne cted to the (-) termin al.
In no times shoul d the (+) and ( -) be short t ogeth er or the char ger and b atteri es will be damaged.
2.Co nnect the AC input and ch eck wheth er the operation o f LE D is correc t.
(red : chargi ng ; green : batt ery is full)
Note s On Operation:
1.Th e charg er should be assembl ed in the place with good ve ntilati on and low moisture.
Expo sure to the rain or snow i s stric tly prohi bi ted.
2.Wi res con necting between the ch arger a nd b atteries should be as short a s possibl e since the h ig h volta ge drop on th e wires wil l
increase th e time requir ed to fully charge the batteries.
3.Th e charg er is suita ble for lead-acid batteries ( fl ooded, Ge l and AGM) an d Li-io n batteri es (lithium iron and l ithium mang anese).
Make sure the c ha rging v ol tage an d charging cu rrent are s uitable f or the ba tt eries y ou are usin g. Modifica tion for c harge r
specifica ti on may be req uired for different b at tery spec ification. Plea se cont ac t batte ry vendor and M EAN WELL for details.
4.If the batter ies need to connect in series fo r charg ing, old batteries a re not sugg es ted to be u sed with new ones or the l ifetime o f
batt eries may r educe b ec ause of the unbalanc e charg ing volta ge d istri bution on new and old ba tteries .
5.Pl ease turn o ff the charg er before connecti ng or disconn ecting th e wires.
6.Th e charg er has a 2-ye ar worldwid e warrant y, however, damages from misusing the charge r will not be included i n the cov er age of
warranty.
WARNING : Please make sure the polarity of the battery is connected correctly!
AC FG
-V connected to AC FG
R7B : UL2464 18AWGx4C 1200 50mm±
AD1 : SJTW 18AWGx2C 1200 50mm±
R7B (standard)
1
2
4
3
POWER LED
2
Status Under General Operation:
At the beginning stage of operation, the charger provides the largest current with 13.6Vdc of output voltage (for 12V batteries) to
charge batteries. The LED indicator will lighten in red. After a period of time (probably a couple of hours, based on the capacity of
batteries), the charging current will decrease gradually. After reaching 10% of its maximum value, the charger will go into "floating-
charge" stage. The LED indicator will turn to green. The relationship between charging current and charging voltage for each operation
stage are shown in the curves below :
Charging Current And Ambient Temperature
LOAD (%)
EXTERNAL CASE TEMPERATURE ( )℃
TIME
V
100%
10%
Constant Voltage Area
Stage 2
Float Charging I
(V,I)
Constant Current Area
Fast Charging
Stage 1
Red Green
Color of LED
■
■
■
■
Suggested Battery Capacity:
1. It will not have any problem if the capacity of batteries larger than the suggested value. It just takes more time to make the batteries
2.If you have any question about the suitable charging current for the batteries, please refer to the technical data provided by the
fully charged!
battery manufacturers or consult the vendor of the batteries.
Notes On Failure Elimination
No output
voltage
send it back to us or any
of our distributors
Wrong polarity of the battery
connection
Model
GC120A48
Suitable for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
10-35Ah
Suggested Battery capacity
If you still cannot eliminate the failure situation, please consult
the FLOAT
(green light)
stage after
long period
of charging
operation
Replace the batteriesBatteries are aging or broken
MEAN WELL or any of our distributors
-10 2010 30 40
20
40
80
60
100
605045 70
50
230VAC
100VAC
(HORIZONTAL)

Specyfikacje produktu

Marka: Mean Well
Kategoria: Ładowarka baterii
Model: GC120A24-R7B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mean Well GC120A24-R7B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Mean Well

Mean Well

Mean Well NPB-1200-24 Instrukcja

5 Stycznia 2025
Mean Well

Mean Well GC220A24-R7B Instrukcja

15 Września 2024
Mean Well

Mean Well GC160A48-R7B Instrukcja

12 Września 2024
Mean Well

Mean Well GC220A12-R7B Instrukcja

11 Września 2024
Mean Well

Mean Well PB-120 Instrukcja

9 Września 2024
Mean Well

Mean Well PB-600 Instrukcja

9 Września 2024
Mean Well

Mean Well GC120A24-R7B Instrukcja

9 Września 2024
Mean Well

Mean Well GC120A48-R7B Instrukcja

9 Września 2024
Mean Well

Mean Well GC160A24-R7B Instrukcja

9 Września 2024
Mean Well

Mean Well GC330 Instrukcja

8 Września 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025
Graupner

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025
Fuxtec

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025
Voltcraft

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025
Nitecore

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025
Envivo

Envivo ENV-1597 Instrukcja

11 Stycznia 2025
Xblitz

Xblitz XC1 Instrukcja

10 Stycznia 2025
Jackery

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025
Jackery

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025