Instrukcja obsługi McIntosh XRT2K

McIntosh głośnik XRT2K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla McIntosh XRT2K (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
XRT2K
Owner’s Manual
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Loudspeaker System
2
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
WARNING - TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric shock, do not remove cover or
back. No user serviceable parts inside.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a non-abrasive dry soft cloth.
7. Install in accordance with the manufacturer’s
instructions.
8. This Loudspeaker is capable of producing
extremely high sound pressure levels, even
when connected to amplifiers of moderate
power output. User caution is advised. Ear
protection is recommended when playing at
high volumes as continued exposure to high
sound pressure levels can cause permanent
hearing impairment or loss. The use of a
Sound Level Pressure Meter will greatly aid in
determining when high volume levels are
occurring.
9. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
10. Only use attachments/accessories specified by the
manufacturer.
11. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
12. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
13. Do not expose this equipment to dripping or
splashing and ensure that no objects filled with
liquids, such as vases, are placed on the
equipment.
14. WARNING: When this Loudspeaker is
connected to an amplifier that is Powered On,
the connection terminals may have hazardous
live voltages present with a risk of electric
shock.
15. CAUTION: When this Loudspeaker is
assembled it weighs 452 pounds (205.0 kgs). It
requires four more persons to safely move or
the Loudspeaker.
3
Customer Service
Technical Assistance
Please Take A Moment
Thank You
Copyright 2005 © by McIntosh Laboratory, Inc.
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Your decision to own this McIntosh XRT2K Loudspeaker
System ranks you at the very top among discriminating mu-
sic listeners. You now have “The Best.” The McIntosh dedi-
cation to “Quality,” is assurance that you will receive many
years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Serial Number:
Purchase Date:
Dealer Name:
If it is determined that your McIntosh product is in need of
repair, you can return it to your Dealer. You can also return
it to the McIntosh Laboratory Service Department. For as-
sistance on factory repair return procedure, contact the
McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar with
your McIntosh equipment and any other brands that may be
part of your system. If you or your Dealer wish additional
help concerning a suspected problem, you can receive tech-
nical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
Safety Instructions
Table of Contents
Safety Instructions ............................................................. 2
Thank You and Please Take a Moment .............................. 3
Technical Assistance and Customer Service ...................... 3
Table of Contents and Important Information .................... 3
Introduction ........................................................................ 4
Performance Features ........................................................ 5
Dimensions ...................................................................... 6-8
Unpacking and Assembly .............................................. 9-10
Room Placement .............................................................. 11
Midrange/High Frequency Column, Low Frequency Col-
umn Base Connections ..................................................... 12
Low Frequency Column Rear Panel Connections ............ 13
How to Connect using a single amplifier ......................... 14
How to Connect using two amplifiers .............................. 16
How to Connect using three amplifiers ............................ 18
Photos ......................................................................... 20-21
Specifications ................................................................... 22
Packing Instruction .......................................................... 23
Caution: The XRT2K when assembled weight is 452 pounds
(205.0kg). It requires four or more persons to safely
handle the Loudspeaker System.
1. Loudspeaker Cables of adequate size are important to ensure
that there will be no significant power loss or heating. Cable
size is specified in Gauge numbers or AWG (American Wire
Gauge). The smaller the Gauge number, the larger the wire
size:
If the Loudspeaker Cables are 50 feet (38.1m) or less, use at
least 12 Gauge (AWG) wire size or larger.
If the Loudspeaker Cables are 100 feet (76.2m) or less, use
at least 10 Gauge (AWG) wire size or larger.
2. For additional connection information, refer to the owner’s
manual(s) for any component(s) connected to the XRT2K
Loudspeaker.
3. The XRT2K’s built-in speaker protection incorporates five
automatic resetting solid-state devices in the crossover
networks. One protects the tweeters, one for the midranges
and three for the woofers. The protection allows a certain
amount of overdrive but extended periods will trigger
protection. If an obvious lack of high, mid or low frequencies
is noticed, the Protection Device may have activated. These
devices will automatically reset when the volume level is
reduced significantly and kept low until the output of the
affected Loudspeaker Element returns to normal.
4. When the XRT2K Loudspeaker System is driven by more than
one amplifier, the output levels of the different amplifiers
connected to the Loudspeaker System must be adjusted to
achieve a proper balance between the low, midrange and
high frequencies reproduced. This adjustment is best
achieved through the use of audio test equipment operated
by a qualified installer.
Important Information

Specyfikacje produktu

Marka: McIntosh
Kategoria: głośnik
Model: XRT2K

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z McIntosh XRT2K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik McIntosh

McIntosh

McIntosh XRT2.1K Instrukcja

4 Października 2024
McIntosh

McIntosh ML1 Instrukcja

25 Września 2024
McIntosh

McIntosh XRT1.1K Instrukcja

17 Września 2024
McIntosh

McIntosh CS100 Instrukcja

2 Września 2024
McIntosh

McIntosh LCR80 Instrukcja

1 Września 2024
McIntosh

McIntosh XCS1.5K Instrukcja

31 Sierpnia 2024
McIntosh

McIntosh XRT2K Instrukcja

24 Sierpnia 2024
McIntosh

McIntosh XR100 Instrukcja

18 Sierpnia 2024
McIntosh

McIntosh RS100 Instrukcja

18 Sierpnia 2024
McIntosh

McIntosh CS200 Instrukcja

18 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025