Instrukcja obsługi McIntosh MTI100
McIntosh
Rekordziści
MTI100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla McIntosh MTI100 (16 stron) w kategorii Rekordziści. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MTI100
Integrated Turntable
Owner’s Manual
2
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide ”
FCC Information (For US Customers)
1. IMPORTANT NOTICE: DO NOT MODIFY
THIS PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modication not expressly approved by McIntosh may
void your authority, granted by the FCC, to use the
product.
2. CAUTION:
• To comply with FCC RF exposure compliance
requirement, separation distance of at least 20cm must be
maintained between this product and all persons.
• This product and its antenna must not be co-located
or operating in conjunction with any other antenna or
transmitter.
3. COMPLIANCE INFORMATION:
• Product Name: Integrated Turntable
• Model Number: MTI100
• This product contains FCC ID: SSS-BC11X:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
Tel. (607) 723-3512
IC Information (For Canadian Customers)
1. PRODUCT:
This product contains IC : 11012A-BC11X
This product complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1)
this product may not cause harmful interference, and
(2) this product must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian
ICES-003.
2. CAUTION:
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
Informations sur IC (pour les clients Canadiens)
1. APPAREIL:
Cet appareil contiens IC : 11012A-BC11X
Cet appareil est conforme à la norme CNR-210 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux
deux conditions suivantes : (1) il ne doit pas produire de
brouillage, et (2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif. Cet appareil numérique de
la classe B est conforme à la norme NMB-003 du Canada.
2. ATTENTION:
An de réduire le risque d’interférence aux autres
utilisateurs, il faut choisir le type d’antenne et son gain de
façon à ce que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis
pour l’obtention d’une communication satisfaisante.
Canadian Customers: CAN ICES-3 (B)/NMB-3
(B)
RF Exposure Information
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has
very low levels of RF energy that are deemed to comply
without testing of specic absorption ratio (SAR).
Cet équipement est conforme aux normes d’exposition
aux radiations FCC/IC dénies pour un environnement
non contrôlé et satisfait les directives d’exposition à la
radiofréquence (RF) dans le supplément C des OET65 et
RSS-102 des règles d’exposition à la fréquence radio (RF)
IC. Cet équipement a de très faibles niveaux d’énergie RF
qui sont jugés conformes sans test de taux d’absorption
spécique (SAR).
R&TTE(EN) Information
1. DECLARATION OF CONFORMITY
Our products follow the provisions of EC/EU directives:
LV: 2006/95/EC
EMC: 2014/30/EU
RoHS: 2011/65/EU
ErP: EC regulation 1275/2008 and its frame work
directive 2009/125/EC
2. IMPORTANT NOTICE: DO NOT MODIFY
THIS PRODUCT
This product, when installed as indicated in the
instructions contained in this manual, meets R&TTE
directive requirements. Modication of the product could
result in hazardous Radio and EMC radiation.
3. CAUTION:
Separation distance of at least 20cm must be maintained
between this product and all persons.
This product and its antenna must not be co-located
or operating in conjunction with any other antenna or
transmitter.
3
Thank you from all of us at McIntosh
You have invested in a precision instrument that will
provide you with many years of enjoyment. Please
take a few moments to familiarize yourself with
the features and instructions to get the maximum
performance from your equipment.
If you need further technical assistance, please contact
your dealer who may be more familiar with your
particular setup including other brands. You can also
contact McIntosh with additional questions or in the
unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance: (607) 723-3512
Customer Service: (607) 723-3515
Fax:(607) 724-0549
Email: support@mcintoshlabs.com
Website: mcintoshlabs.com
Make a Note
For future reference, you can jot down your serial
number and purchase information here. We can
identify your purchase from this information if the
occasion should arise.
Serial Number:
Purchase Date:
Dealer Name
List of Figures
Figure 01– Removing Stylus Guard ..................... 4
Figure 02– Tube Socket ........................................ 4
Figure 03– Vacuum Tube Shield Cover ................ 4
Figure 04– Anti-skate Parts 5 ..................................
Figure 05– Rear view Cartridge Pins 5 ...................
Figure 06– Counterweight Adjustment 5 ................
Figure 07– Top view- Belt and Pulley .................. 6
Figure 08– Rear Panel .......................................... 7
Figure 09– Insert Speaker Cable .......................... 7
Figure 10– Volume and Input Knobs 8....................
Figure 11– Anti-skate cable. 9 .................................
Figure 12– Belt in 45 rpm position 9 .......................
Figure 13– Belt in 33 rpm position 9 .......................
Figure 14– Alignment jig .................................... 10
Figure 15– Remote control diagram ................... 12
Figure 16– Sliding open the remote ................... 13
Turntable Maintenance 9 .........................................
Clean Your Stylus 9 ..................................................
Anti-skate .............................................................. 9
Changing Speeds ................................................... 9
Belt Pulley- 50Hz Verses 60Hz ........................... 10
The Cartridge and the Stylus ............................... 10
Cartridge Alignment............................................ 10
Dimensions .......................................................... 11
Description of Remote Control Buttons .............. 12
Changing the Remote’s Battery .......................... 13
Technical Specifications ..................................... 14
Amplifier ..............................................14
Preamplifier ...........................................14
Olympia Cartridge ................................. 14
Tone Arm ............................................... 15
The Table ...............................................15
General ...................................................15
Trademark and License Information ................... 15
Table of Contents
Thank you from all of us at McIntosh ................... 3
Make a Note ........................................................... 3
Inside the Box ........................................................ 4
Where to Put It ....................................................... 4
Keep it Safe ............................................................ 4
Putting it Together ................................................ 4
To install the Tubes ........................................... 4
Install Vacuum Tube Shield Cover ................... 4
Installing the Wi-Fi Antenna 5 ............................
Installing the Platter 5..........................................
Already Installed .............................................. 5
Installing Anti-skate ......................................... 5
Phono Cartridge Wires 5 .....................................
Installing the Belt ............................................. 6
Record Clamps? ................................................ 6
Playing a Record .................................................... 6
End of the Record 6 ..................................................
Making Connections ............................................. 7
Speaker Connection .......................................... 7
Bluetooth Connection ....................................... 7
More Outputs .................................................... 8
SUB (Subwoofer) 8 ..............................................
Main .................................................................. 8
Trigger Out 8 ......................................................
Data Out ............................................................ 8
Inputs ................................................................ 8
Optical and Coax 8 ..............................................
AUX (Auxiliary) 8 ..............................................
Service Port 8 .......................................................
AC Power .......................................................... 8
Headphones ....................................................... 8
Controlling Your Unit 8 ............................................
Power On (or Off) ............................................. 8
Input Knob ........................................................ 9
Volume Knob ......................................................... 9
About Those Tubes 9 ................................................
Copyright 2018 © by McIntosh Laboratory, Inc
Specyfikacje produktu
| Marka: | McIntosh |
| Kategoria: | Rekordziści |
| Model: | MTI100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z McIntosh MTI100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Rekordziści McIntosh
3 Lipca 2024
Instrukcje Rekordziści
- Rekordziści Technics
- Rekordziści Panasonic
- Rekordziści Medion
- Rekordziści Lenco
- Rekordziści Pro-Ject
- Rekordziści ION
- Rekordziści NAD
- Rekordziści Thorens
- Rekordziści Clas Ohlson
- Rekordziści Crosley
- Rekordziści Reloop
- Rekordziści Akiyama
- Rekordziści Brigmton
- Rekordziści Sylvania
- Rekordziści Ricatech
- Rekordziści Stanton
Najnowsze instrukcje dla Rekordziści
15 Października 2024
10 Października 2024
9 Października 2024
7 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024
6 Sierpnia 2024