Instrukcja obsługi McIntosh MDA200

McIntosh Przetwornik cyfrowo-analogowy MDA200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla McIntosh MDA200 (16 stron) w kategorii Przetwornik cyfrowo-analogowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com

MDA200

D/A Converter

Owner’s Manual

General Information

The main AC power going to the MDA200 and

any other McIntosh component(s) should not be

applied until all the system components are con-

nected together. Failure to do so could result in

the malfunctioning of some or all of the system’s

normal operations. When the MDA200 and other

McIntosh components are in their Standby / Power

O Mode, the microprocessor’s circuitry inside

each component is active and communication is

occurring between them.

The unbalanced outputs and the balanced outputs

can be used simultaneously.

The MDA200 internal digital-to-analog converter

circuitry is designed to decode 2 channel PCM

(Pulse Code Modulation), Dolby Digital and DTS

bitstreams, and DSD (Direct Stream Digital) digi-

tal signals present at the coaxial, optical, and USB

digital inputs. Other digital audio signal format

types will cause the audio outputs of the MDA200

to be muted.

The IR input, with a 3.5mm mini phone jack, is

congured for non-McIntosh IR sensors such as a

Xantech Model HL85BK Kit.

When discarding the unit, comply with local rules

or regulations. Batteries should never be thrown

away or incinerated but disposed of in accordance

with the local regulations concerning battery

disposal.

For additional information on the MDA200 and

other McIntosh products please visit the McIntosh

website at www.mcintoshlabs.com.

Table of Contents including Figures

General Information �� 2

Performance Features�� 3

Trademark and License Information �� 3

Front Panel Displays and Switches� �� 4

Rear Panel Connections and Switches �� 5

Connectors and Cable Information �� 6

System Configurations �� 7

DAC Mode . .. .. .. .. .. .. .. .. .. .. .. .. .. 7

Preamp / DAC Mode .. .. .. .. .. .. .. .. .. .. 7

Setup Menu �� 8-10

Trim Functions Menu � �� 10

Dimensions �� 11

Using Your MDA200 �� 12

Remote Control �� 13

Changing the Remote’s Battery . .. .. .. .. .. 13

Specifications �� 14

Audio Specifications .. .. .. .. .. .. .. .. .. .. 14

Digital Audio Specifications .. .. .. .. .. .. .. 14

General Specifications .. .. .. .. .. .. .. .. .. 14

Packing Instructions �� 15

Part List �� 15

Thank You from All of Us at McIntosh

You have invested in a precision instrument that

will provide you with many years of enjoyment.

Please take a few moments to familiarize yourself

with the features and instructions to get the

maximum performance from your equipment.

If you need further technical assistance, please

contact your dealer who may be more familiar with

your particular setup including other brands. You

can also contact McIntosh with additional questions

or in the unlikely event of needing service.

McIntosh Laboratory, Inc�

2 Chambers Street

Binghamton, New York 13903

Technical Assistance (607) 723-3512

Fax (607) 724-0549

Customer Service (607) 723-3515

Fax (607) 723-1917

Email support@mcintoshlabs.com

Website www.mcintoshlabs.com

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”

Safety First

Please read the safety instructions included in a

separate document called “Important Additional

Operation Information Guide.”

Please Take A Moment

For future reference, you can write down your

serial number and purchase information here. We

can identify your purchase from this information

if the occasion should arise:

Serial Number: __________________________

Purchase Date: ___________________________

Dealer Name: ___________________________

Performance Features

• Alphanumeric Fluorescent Display

The front panel information display indicates the

source selection, sampling frequency, volume

level, and setup mode selections. The display

intensity is adjustable.

• Dual Function

Connect the MDA200 to an existing McIntosh

analog audio system to provide the latest in

digital-to-analog conversion from digital audio

sources or use the MDA200 as the preamplier

together with McIntosh source components and

power amplier to form a complete audio system.

• Electronic Input Switching

Electronic input switching on all inputs provides

reliable, noiseless, distortion free switching.

• Quad Balanced Digital-to-Analog

Converter

The 8 channel 32-bit digital-to-analog converter is

used in a stereo quad balanced mode, assuring the

music is reproduced with a wide dynamic range

and extremely low distortion.

• Balanced Outputs

The balanced outputs allow the connection of

long cable lengths without a loss in sound quality.

• Precision Tracking Volume Control

Volume levels are controlled by a new precision

digitally controlled attenuator system with a track-

ing accuracy of 0.5dB.

• Remote Control with External Sensor Input

The remote control provides control of the

MDA200 operating functions and allows enjoy-

ment of your McIntosh system from another room

in your home by connecting an external sensor.

• Power Control Input and Output

A power control connection for powering on

multiple McIntosh power ampliers, source

components, and accessories is included for your

convenience.

• Special Power Supply

Fully regulated power supplies ensure stable noise

free operation even though the power line varies.

• Gold Plated Connectors

The input and output connector contacts are gold

plated for superior corrosion resistance and high

electrical conductivity.

• Fiber Optic Front Panel Illumination

The even illumination of the front panel is ac-

complished by a combination of custom-designed

ber optic light diusers and extra long life Light

Emitting Diodes (LEDs).

• HDMI TV Sound

The HDMI ARC (Audio Return Channel) allows

you to use your entire audio system to play the

sound from your TV, including the over-the-air

broadcasts, HDMI inputs, and streaming services.

• Digital Audio Inputs

The MDA200 has coaxial, optical, MCT DIN,

HDMI (ARC), and USB inputs to decode PCM and

DSD signals from an external source. The coaxial

and optical inputs process digital signals up to

192kHz with 24-bit resolution and decode Dolby

Digital and DTS bitstreams. The digital MCT DIN

connection allows for streaming of high bandwidth

digital signals (DSD, PCM) from external sources.

The USB input processes PCM digital signals up

to 192kHz with 32-bit resolution, decodes up to

DSD512 digital signals and DXD 24-bit with a

sampling rate of 352.8kHz (or 384kHz).

Trademark and License Information

The McIntosh MDA200 incorporates copyright

protected technology that is protected by U.S.

patents and other intellectual property rights. The

MDA200 uses the following technologies:

Trademark Logo License Information

ASIO is a trademark and

software of Steinberg Media

Technologies GmbH

HIGH-DEFINITION MULTIMEDIA INTERFACE

The terms HDMI, HDMI High-Denition

Multimedia Interface, and the HDMI

Logo are trademarks or registered

trademarks of HDMI Licensing

Administrator, Inc.

For DTS patents, see http://patents.

dts.com. Manufactured under license

from DTS, Inc. DTS, the Symbol, DTS

and the Symbol together, and Digital

Surround are registered trademarks and/

or trademarks of DTS, Inc. in the United

States and/or other countries. DTS, Inc.

License Notice and Trademark Acknowl-

edgment: Manufactured under license

from Dolby Laboratories. Dolby, Dolby

Audio, and the double-D symbol are

trademarks of Dolby Laboratories.

Specyfikacje produktu

Marka:	McIntosh
Kategoria:	Przetwornik cyfrowo-analogowy
Model:	MDA200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z McIntosh MDA200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Przetwornik cyfrowo-analogowy McIntosh

McIntosh MDA200 Instrukcja

24 Sierpnia 2024

Instrukcje Przetwornik cyfrowo-analogowy

Najnowsze instrukcje dla Przetwornik cyfrowo-analogowy

CYP AU-D3-H Instrukcja

29 Września 2024

CYP AU-D150 Instrukcja

29 Września 2024

CYP AU-D3-192 Instrukcja

29 Września 2024

Esoteric Grandioso D1 Instrukcja

20 Września 2024

Esoteric D-02X Instrukcja

19 Września 2024

Esoteric D-02 Instrukcja

17 Września 2024

Esoteric Grandioso D1X Instrukcja

17 Września 2024

Esoteric OP-DAC1 Instrukcja

17 Września 2024

Pro-Ject DAC Box RS2 Instrukcja

2 Września 2024

ART DI/O Instrukcja

26 Sierpnia 2024